Reviews Magnetic Vise Jaw Padss

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • ... re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. Fo....
Check Stock

Housolution Bench Vise 4 Inch, 360°Swivel Base Bench Clamp with 100mm Vise Jaw, Home Vise Clamp-On Vise Repair Tool Work Bench Vice for Cutting Conduit, Drilling, Metalworking - Black & Blue

  • 【360 Degree Swivel Base with Dual Locking Nuts】: Built in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work. The dual locking nuts helps to clamp the work piece properly..
  • 【Magnetic Vise Jaw Pads with Multi Grooves】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded items, safely protecting flat or round product. Provide three kinds of angle for clamping items: 60°, horizontal angle, vertical angle. Please refer to the picture for angle diameter..
  • 【Wide Applications】: This bench vise is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench..
Check Stock

Yost Vises MA-345 4-1/2' Magnetic Aluminum Vise Jaw Caps (1 Pair)

  • Jaw caps attach to and cover a set of 4-1/2"-wide serrated vise jaws to shield delicate work from damage.
  • Aluminum provides durability, and the smooth grooved surface provides enhanced grip while preventing the clamped item from being marred.
  • Magnetic backing runs the full length of the cap to securely bond it to the vise jaw.
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

Riverruns Fly Tying Vise

  • Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

LAOA Vise-Grip with Wire Cutter Original Locking Tool 5-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench

  • LAOA Vise-Grip with Wire Cutter Original Locking Tool 10-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench.
Check Stock

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium Blue

  • MULTI-JAW VISE: The Yost Vises 750-E 5 Inch medium duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface..
  • TECHNICAL SPECS: Jaw Width 5" (12.7 cm), Jaw Opening 5" (12.7 cm), Throat Depth 3" (7.62 cm), Min Pipe Capacity .375" (0.9525 cm), Max Pipe Capacity 2.5" (6.35 cm)..
  • SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over....
Check Stock

Yost M9WW Rapid Acting Wood Working Vise, 9\

  • Heavy duty cast iron and steel construction, predrilled for mounting wood jaw facings,.
  • Quick release level allows for rapidly opening and closing the vise.
  • Fitted with an adjustable front stop (bench dog).
  • Engineered for optimal safety, the fused tommy bar will bend before vise becomes over-stressed.
  • Unique vise design ensures smooth & efficient operation making this vise the most versatile and frequently used tool in your workshop.
Check Stock

Yost Vises M7WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 7 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M7WW 7-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 7" (17.78 cm), Jaw Opening 8" (20.32 cm), Throat Depth 3" (7.62 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close and turn the vise handle counterclockwise. To use the quick-release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..
Check Stock

Grizzly Industrial H2992-6' 2-Piece Milling Vise

  • Maximize the work area of your milling table and get the maximum spindle to table clearance with this 2 piece milling vise the vise jaw faces measure.
  • The vise jaw faces measures 2 1/4-Inch by 6-Inch and the movable jaw has a 1-Inch range.
  • The bottoms are keyed to speed up alignment.
Check Stock

WEN VJT404 4-Inch Universal Soft-Grip Magnetic Vise Jaw Pads Two Pack

  • Includes two 4-inch vise jaw pads for additional protection to your projects.
  • Features contours for gripping cylindrical workpieces at both 90 and 45 degrees.
  • Attaches easily to any vise with the two included magnetic backing pads.
  • Made from durable yet non-marring thermoplastic polyurethane.
  • Universal design compatible with the majority of vises on the market.
Check Stock

Mophorn Milling Vise 4'/100mm,Bench Clamp Vise Nodular Cast Iron Material,Clamping Vise Clamping Force 19KN Max, Milling Machine Vise

  • Clamp Capacity: High precision clamp vise with a jaw width of 3.94 inch (100 mm). Jaw opening: 4.7 inch (120 mm).
  • Main Parameter: Super-lock clamp vise height: 3.7 inch (95 mm). Jaw height: 1.2 inch (30 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Well-chosen nodular cast iron offers strong toughness, making this clamping vise solid and durable.
  • High Precision: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
Check Stock