Reviews Magnetic Pipe Cutting Machine

PVC Cutter 2-1/2\

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock

PVC Cutter, Up to 2-1/2 inch, Ratchet-type PVC Pipe Cutter for Cutting PEX,PVC,PPR and Plastic Hoses,Suitable for Maintenance, Plumber and DIY Home worker (2-1/2\(Gray）)

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock

Steel Dragon Tools® 600 PRO Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch fits RIDGID® 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • 【WIDE APPLICATION】: This Pipe Beveling Machine is suitable for petroleum, chemical, mechanical, processing, electricity, construction, mining industries etc..
  • 【Deviation】: less than 0.5mm for one circle cutting up on up to 17" diameter pipe..
  • 【Absorption affinity of magnetic wheel】: more than 110lbs..
  • 【Tube Diameter】: 4-1/4" Pipe and above..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

2300W Electric Pipe Threader Ratchet Type w/ 6 Dies Set 1/2" to 2" + Fixed Rod + Pipe Clamp + Carbon Brush + Oil Can, Tap Bar Head Handheld Handle Threading Plumbing Hand Tools Tube Tapping Machine

  • Various Specifications & Precise Cutting: It is equipped with six different sizes of dies (1/2", 3/4", 1", 1-1/4", 1-1/2", 2"), so it can meet the cutting needs of different sizes and materials. It adopts standard pipe cutting threads, which makes cutting to a more precise degree and provides you with a better experience..
  • High Quality, Powerful Motor & Low Noise: This machine is made of pure copper, which is durable and not easily damaged. Copper is the ideal material for an electric pipe threader machine. The motor power of electric threading machine is 2300w, which has high efficiency and can save your working time. It adopts a high-quality all-copper motor, so it will make as little noise as possible while running without disturbing your rest..
  • Fixed Rod & Multiple Switches: The rod can help you fix the pipe and make the pipe attached to each other as to how you want them to be. You can have a better work performance with this rod. Pipe making kit is designed with a forward and reverse switch, a locking power switch, and a start switch. Different switches correspond to different functions, allowing you to switch selec&#....
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool & WORKPRO 25FT Tape Measure

  • ...uminum alloy steel with high hardness, good toughness and high strength. The blade is made of 5Cr15MoV, which is not easy to rust, bend and break, and can cut the pipe evenly and accurately, not easy to deviate.
  • WORKPRO Ratchet PVC Pipe Cutter Tool - Ratchet PVC Cutter is designed to OD up to 2-1/2"(63mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
  • WORKPRO Ratchet PVC Pipe Cutter Tool - The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
  • WORKPRO 25FT Tape Measure - The design of wrist strap and belt clip makes the tape measure easy to carry in various occasions.When your hands are not free, you can hang it around your waist or tie it around your wrist. Of course, the design of the strap also makes the product more convenient to hang and store.
Check Stock

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

  • Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
  • 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
  • The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
  • POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
  • AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
  • SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check Stock

YIYITOOLS PVC Pipe Cutters - Ratcheting Hose & Tube Cutter, Cutting 2-1/2” PEX, PPR, PVC Plastic Pipe, Suitable for Plumbers, Home Owner, Solar Company, Car Repair

  • Fitment：The PVC Cutter is Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair.Cuts Up to 2-1/2" Pipe Capacity.（When cutting PVC flexible pipe you should revolve the pipe whilst compressing）.
  • Big opening： AIRAJ PVC PIPE CUTTER can be used on a pipe diameter of up to 63 mm..
  • Material：The durable cutting machine is made of 4.0 thickened manganese steel, sharp, and the surface is polished. The blade body is made of die-cast aluminum alloy with good strength, good durability and toughness, and is not easy to rust..
  • Design：Ergonomic Grips on Bottom Handle, Delivers Fast and Easy Single Stroke Cuts, Faster Positioning with no Ratcheting or Twisting. More Convenient for Using, Reduces User Fatigue.Newest Ratcheting Design is more Labor-saving and Convenient, Only One Hand is Needed to Complete the Cutting Operation..
  • Easy to use: Before starting, each hand holds a handle and pulls it upward in a fan-shaped way to open the blade，put the pipe diameter below 63mm in cutter,push down handle repeatedly,forthwith cut off.After cutting,clean the blade with rustproof oil.Close the handle for ready use next time..
Check Stock

ACTOOL 2' Diameter × 2' Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • 2" Diameter x 2" Depth of Cut include free Pilot Pin.
  • Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability..
  • Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting..
  • 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form..
Check Stock

ACTOOL 1' Diameter × 2' Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • 1" Diameter x 2" Depth of Cut include free Pilot Pin.
  • Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability..
  • Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting..
  • 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form..
Check Stock

PVC Cutter 2-1/2\

  • 【WIDELY USED】: Can be used for PP-R pipes, PVC pipes, PE pipes, etc. Cuts Up to 2-1/2" Pipe Capacity.（When cutting PVC flexible pipe you should revolve the pipe whilst compressing）Ideal for Home Working and Plumbers.
  • 【EFFICIENT WORKING】: The cutting machine adopts ratchet drive technology to ensure automatic locking during the cutting process to protect the user from the rebound of the blade. The handle adopts the principle of leverage and is light in design, which greatly saves your strength.In the bottom of the tube cutter, there has a stainless buckle.When you don’t use it, you can buckle the safe lock. The tube cutter will become small to save space.
  • 【QUICK CHANGE BLADE SYSTEM】: Has a quick blade replacement system.You can easily and quickly replace the blade without any other tools,Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter.You can easily change blades in less than 10 seconds..
  • 【ERGONOMICS DESIGN】: The handle of the pipe cutter covered by soft rubber and is ergonomically designed which is non-slip,soft and comfortable,reducing fatigue on your hands and wrists. It can be operated for a long time and improve work efficiency..
  • 【SUPER QUALITY】: Pvc pipe cutters blade uses ....
Check Stock

ACTOOL 7/8\ Diameter × 2\ Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • 7/8" Diameter x 2" Depth of Cut include free Pilot Pin.
  • Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability..
  • Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting..
  • 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form..
Check Stock