Reviews Magnetic Coupling For Chemical Process

Hillman Fasteners 123174 Series 170' 9GA Smooth Wire

  • Made Of High Quality 304 Stainless Steel, It Is Corrosion Resistant, Not Easy To Rust And Has Good Elasticity.
  • Spring Steel Wire,Smooth Surface Without Burrs,Flexible,Bright.
  • Use Widely Used,Can Do Springs,Wear Beads,Can Cut Soap,Cut Eggs Cut Sponges,Lift The Sample Line.
  • Widely Used In Textile,Chemical Pipeline,Personal DIY,Hand-Woven,Metal Jewelry DIY Etc.
  • Note:Why Stainless Steel Have Magnetic:304 Stainless Steel Is Austenitic Stainless Steel,A Small Amount Of It Is Transformed Into Martensite During The Cold Working Process,Martensite Is Magnetic,All 304 Stainless Steel Is Non-Magnetic Or Slightly Magnetic.
Check Stock

CUFEAL 3-Pack 400mm / 15-3/4\ Long Straight Pipe lamp stem Black Finish Lamp Rod Kit with Couplings (M16)

  • Made of iron,total length of 3 lamp rod connected is about 47 inches,black paint anti rust process.
  • 400mm/15.75“ long ,16mm/0.63" outer diameter lamp rod is hollow to slip lamp wire through..
  • Couplings included, double coupling use to connect 2 lamp rod together perfectly, single coupling use to connect lamp rod to base or lamp fixture..
  • Good ideal for DIY making, repairing, and restoring lamps..
  • Contains: 3x Lamp rod, 2x Double couplings, 2x Single coupling, 2x Pipe thread,2x locknuts.
Check Stock

Magnetic Jet Motor BF-004 for Luraco Magnetic Jet Pedicure Spa Tubs Wet End Use with Pedicure Liners (Includes Propeller and Cap)

  • BF-004 Pedicure spa chair part magnetic head uses magnetic coupling technology.Whirlpool Spa Chair.MOTOR DIMENSION: 3 3/8"" Diameter Back Head X 3 1/8"" ..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
  • There is no shaft seal, will never leak, is worry free..
  • If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions!.
Check Stock

Showingo New Pipeless Magnetic Jet Head Motor for LURACO Pedicure spa Chair Part Magnetic Head BF-004 Pedicure spa Tubs Includes Propeller and Cap

  • Pedicure spa chair part magnetic head uses magnetic coupling technology..
  • Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • There is no shaft seal, will never leak, is worry free.
  • The Magnet-jet be easily sanitized, clean, and service..
Check Stock

Pipeless Jet Magnetic/Spa Pedicure Chair Motor for Luraco Magnet Jet

  • 【Pipeless Magnetic Jet For LURACO 】Fit Luraco pipeless motor magnetic jet nail pedicure spa chair, Mostly, this Jet is able to be installed in all models..
  • 【Luraco Magnet Jet】Compatible with Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
  • 【FEATURES】Luraco pipeless magnetic jet pedicure spa massage chair, Patented magnetic coupling design,Dual powerful jet streams 35 degrees with respect to pump axis,Easy to install,Super Easy to clean..
  • 【Premium Quality】Pipe-less Jet Long life motor Green Technology only 50W energy consumption,Low power consumption,Long life motor.Very quiet when running..
  • 【Luraco Magnetic Jet 】 Specifications:110VAC,Built with magnetic impeller to be used easily with liner,Need 3"1/2 hole to mount the jet in the tub..
Check Stock

Moondrop CHU High Performance Dynamic Driver IEMs in-Ear Earphone (Without mic)

  • Nano-Crystal Coating Composite Diaphragm.
  • 10mm Composite Cavity Dynamic Structure：Adopting the Aria's decentralized dynamic structure, the high-performance 10mm composite cavity with high-frequency phased waveguide leverages a N52 Nd magnet internal magnetic circuit and 0.035m ultra-thin imported CCAW sound coil to obtain high energy conversion efficiency, and deliver outstanding performance with full dynamic range and rich details..
  • Accurate Calculatioof Acoustic Coupling Cavity：In order to match the frequency response as closely as possible to the VDSF Target Response, the acoustic coupling cavity needs to be carefully controlled. Through volume and dimension calculation, FEA finite element simulation and 3D printing experiment verification, an acoustic coupling cavity has been created which can accurately reproduce the ideal frequency response..
  • Alloy Casting External Cavity：The metal outer cavity is manufactured from alloy materials using melting and injection molding technology, thus creating a stable, precise, and esthetically pleasing cavity that is both durable and reliable..
Check Stock

REGNHLIF Zinc and Brass Male Clamp Coupling,Fits 3/4" or 5/8" Garden Hose Repair Fitting

  • End Male Hose Connector/Replacement/Mender For 5/8 inch or 3/4 inch hoses.
  • Brass Male Coupling, Zinc clamp and stainless steel screws.
  • Easy to use and reliable,Work perfectly with any standard garden hose.
  • Made with precision process, no leaking and durable, reusable and easy to install.
  • Package include:1 Pack Hose Connector Kit (1 Male coupling + 1 clamp + 2 screws).
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

Genova Products 30190 PVC Slip Coupling, 2-1/2"

  • Ideal for cold water pressure applications.
  • Used in irrigation, underground residential sprinkler system, water service pipe, deionized water lines, swimming pool installations and some chemical drainage systems.
  • INSIDE MEASUREMENT – 2-1/2″ slip x 2-1/2″ slip.
Check Stock

3M ESPE 68411 CoJet System Refill (Pack of 3)

  • Blasting with the cojet system embeds a ceramic Layer on the surface of metal, porcelain or previously cured composite, producing dramatically enhanced bond strengths.
  • Embedded ceramic Layer enables silane coupling with composite for a true chemical bond with alloys and porcelain.
  • Highly esthetic repair of porcelain or composite restorations.
Check Stock

3M ESPE 68421 CoJet System Intro Kit

  • Blasting with the cojet system embeds a ceramic Layer on the surface of metal, porcelain or previously cured composite, producing dramatically enhanced bond strengths.
  • Embedded ceramic Layer enables silane coupling with composite for a true chemical bond with alloys and porcelain.
  • Highly esthetic repair of porcelain or composite restorations.
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • ...55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
  • External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed....
Check Stock

Activated Charcoal Capsules - 1,200 mg Highly Absorbent Helps Alleviate Gas & Bloating Promotes Natural detoxification Derived from Coconut Shells - per Serving - 100 Vegan Capsules

  • Charcoal goes through a chemical or hot gas process to create activated charcoal. After this process of “activation”, the charcoal is more porous and more absorbent. Our activated charcoal is derived from organic coconut shells which goes through a process of burning the coconut shells in an airless high heat oven, which then goes through a hot gas nitrogen process to create activated charcoal. We do not use chemical processing.
  • Natural hot gas process: The hot gas process gives the activated charcoal an incredible ability to bind to other substances. The process of burning creates natural gases which are absorbed at minimal amounts by the activated charcoal, this odor is harmless and minimal.
  • The down side of the hot gas process is the scent but with chemical processing it will allow the activated charcoal to absorb the stronger chemical agents used..
Check Stock