Reviews Magnet Wire Roll 30 Awg

Mandala Crafts Anodized Aluminum Wire for Sculpting, Armature, Jewelry Making, Gem Metal Wrap, Garden, Colored and Soft, Assorted 6 Rolls (16 Gauge, Comb 10)

  • Bendable and colored wire for crafts from solid aluminum.
  • Thin wires with 18 AWG or higher are dead soft and thick wire with 16 AWG or lower are half hard.
  • VERSATILE: Sculpturing, wire weaving, decorating, crafting, beading, jewelry making, floral arranging, gardening, fence repairing, wire shaping for amateur education, or wrapping.
  • Great for making sculptures, necklaces, gem wrap pendants, bracelets, earrings, ornaments, mesh, chainmail, toys, and DIY artistic projects.
  • Colors are not easy to flake off when being bent or smashed with coated tools.
  • Extra-long: Set of 6 colorful assorted rolls.
  • The color might vary slightly from the pictures due to monitor resolution and photography light setting.
  • 16 AWG, 18 AWG, 20 AWG, 22 AWG, and 24 AWG Combo Length: 75 FT Per Roll X 6.
Check Stock

Mandala Crafts Anodized Aluminum Wire for Sculpting, Armature, Jewelry Making, Gem Metal Wrap, Garden, Colored and Soft, Assorted 6 Rolls (22 Gauge, Combo 12)

  • Bendable and colored wire for crafts from solid aluminum.
  • Thin wires with 18 AWG or higher are dead soft and thick wire with 16 AWG or lower are half hard.
  • VERSATILE: Sculpturing, wire weaving, decorating, crafting, beading, jewelry making, floral arranging, gardening, fence repairing, wire shaping for amateur education, or wrapping.
  • Great for making sculptures, necklaces, gem wrap pendants, bracelets, earrings, ornaments, mesh, chainmail, toys, and DIY artistic projects.
  • Colors are not easy to flake off when being bent or smashed with coated tools.
  • Extra-long: Set of 6 colorful assorted rolls.
  • The color might vary slightly from the pictures due to monitor resolution and photography light setting.
  • 16 AWG, 18 AWG, 20 AWG, 22 AWG, and 24 AWG Combo Length: 75 FT Per Roll X 6.
Check Stock

420pcs Non-Insulated Ring Terminals & Fork Connector Kit 22-16/16-14/12-10 Gauge Wire Lugs Battery Cable Terminals Wire Crimp Connectors High Temperature T2 Pure Non-Insulated Copper Connector

  • Ring Terminal & Fork Connector Kit Material: T2(99.9% Purity) Copper.As a wire crimp connector, it has strong conductivity and is not easy to corrode.
  • ELECALL selects 18 types of wire connector. Group by ring and fork with three suitable wire type. Model OTA-B: "A" means the wire square(mm²) that this ring terminal or fork connector can hold, "B" means the inner diameter of the ring or fork for screw..
  • Non insulated ring terminals high quality gurantee: producted under UL standard；High corrosion resistance；silver welding wire thickness: Comply with international standard,High temperature battery terminal connectors resistant heavy ring connector.Copper content ≥ 99%, conductivity ≥ 96%, high conductivity, ductility and corrosion resistance,It's a good helper for wire connection.
  • Fork Connector(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Fork Connector (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Fork Connector (AWG12-10)-0.2" -15pcs (AWG12-10)-0.25" ----- 15pcs.
  • Ring terminal(AWG22-16)-0.12"-30pcs (AWG 22-16)-0.16" -30pcs (AWG 22-16)-0.2" -20pcs Ring terminal (AWG14-12)-0.12" -30pcs (AWG14-12)-0.16" -30pcs (AWG14-12)-0.2" - 20pcs (AWG14-12)-0.25" - 20pcs Ring terminal....
Check Stock

IWISS Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP TYCO Deutsch Terminals Crimper, Molex Crimping Tool,24-14 AWG

  • Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

Bakers Pride M1296X 72 Long T46 Thermocouple

  • K-type Thermocouple wire for making thermocouple or extension wire, up to 752 °F (400 °C).
  • Chromel / Alumel type K thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • The K-type wires are AWG 24 (0.51 mm) in diameter.
  • ANSI color coded braided fiberglass insulation, red = -, yellow = +.
  • 10 yard ( 30 ft ) roll, wire is flexible and easy to bend to shape.
Check Stock

IWISS IWC-1424A Crimping Tools for Deutsch DT Series Stamped & Formed Contact, Open Barrel Terminal Crimping Tool, AWG14 to AWG24 Wire Crimper

  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Deutsch Stamped Contact Size 16 Crimp Tool: IWC-1424A is also designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
  • B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
  • IWC-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..
Check Stock

RockDIG 300Pcs 12 10 8 6 4 2 1/0 2/0 Wire Ferrule Tinned Copper Crimp Connector Electrical Cable Pin Cord End Terminal 8 Sizes Assortment Kit

  • The wire ferrules are made of high quality red copper. Tinned, anti-oxidation, anti-corrosion..
  • Ferrules designed with insulation flare makes wire insertion easier and eliminates loose strands of wire, prevent wire ends from fraying or breaking..
  • 8 types(AWG 12, 10, 8-7, 6-5, 4, 2, 1/0, 2/0) wire copper crimp connectors provide a easy and secure way to make reliable connections..
  • Widely used for car audio installers/enthusiasts, household appliances or DIY. This Wire Copper Crimp Connector provides a great wiring solution for limited space areas..
  • Package Includes: AWG 12*50pcs, AWG 10*50pcs, AWG 8-7*50pcs, AWG 6-5*50pcs, AWG 4*30pcs, AWG 2*30pcs, AWG 1/0*25pcs, AWG 2/0*15pcs..
Check Stock

MaySpare Max 200A Trombetta Continuous Solenoid Relay 3 Terminal Heavy Duty Winch Marine 24106 SPST Solenoid 12VDC

  • Contacts:Normally Open (NO)/ Flat Base Metal Case / 10-32 Terminal.
  • 3 Pole Battery Isolation Solenoid, 12VDC With 2 Copper Point,Housing plated Steel Case / 180Flat mounting bracket./ Mounting holes: 5/16 x 19/32, 2-13/64 on centers..
  • Our Coil Roll is using 180℃ Copper. Max Current Above 200amp/ Rate Current: 100A / Our Cover is Environmental Plating,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion.
  • INSTIALL：One side goes to Battery, opposite side to starter, top screw which is smaller goes to switch or key start only. It is already grounded internal..
  • Note:If it is the energizing circuit which is typically 16/18 Awg , suggest a 5amp fuse.
  • If 10 Awg wire suggest 30 amp auto cicuit breaker.
  • If high output alternator, suggest an 8 Awg wire with a 50 Amp auto circuit breaker.
Check Stock

AEcreative 10-160 Meter Amateur ham HF Band Radio Wire Loop Antenna Balun Unun DIY kit T200-2 Type 2 Iron Powder ferrite toroid 2" core 16AWG Enameled Magnet Winding Wire 1.5KW

  • Please note: this listing is build kit hardware only, we do not provide build plan, included all hardware to build your own high power Balun/Unun up to 1.5KW, for make 1:1, 4:1 or 9:1 Balun/UNUN as desired..
  • Precise pre drilled waterproof balun box, T200-2 type 2 iron powder toroid 2" core, (optimum resonant freq range 0-40Mhz)..
  • 10' 16AWG 1.30mm Enameled Magnet Winding Wire, (Temperature Rating 155℃), nickel plated brass conectors..
  • Balun box dimension: 3 1/4" x 3 1/8" x 2 1/8".
  • Package included (Unassembled kit) : 1x t200-2 toroid, 1x SO-239 antenna socket, 2x antenna wire connector (fit up to 8awg antenna wire), nuts, bolts,washers, wire terminals included..
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock