Reviews Machined Part

Evike ARES Licensed Remington MSR Bolt Action Spring Powered Airsoft Sniper Rifle Model MSR-338 / Tan

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
  • Bolt action single shot spring powered rifle.
  • Precision CNC machined aluminum receiver.
  • Precision CNC machined handguard and stock.
  • 545mm Picatinny flat top rail for optics.
Check Stock

GAR S-22 22 Speciman Surface Roughness Comparator AS9000 Compliant

  • Pocket size gage with 22 precision surfaces for specifying and controlling surface finishes.
  • There are twenty two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled - ranging from 2 to 500 microinches.
  • The S-22 conventional machining microfinish comparator is rectangular in shape (2" x 5 3/8") and is a corrosion resistant electroformed nickel duplicate of actual machined surfaces.
  • Supplied in a leatherette case with engineering data and instructions.
Check Stock

DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)

  • Brushless motor of the electric hand planner provides power and runtime.
  • The hand planer featuring 30,000 cuts per minute achieves a fast removal rate.
  • Calibrated depth adjustment knob to 1/256-inch (0.01 mm. approximately).
  • Precision-machined front and back aluminum shoes ensure parallelism of cut.
  • Kickstand allows user to rest the planer on work surface without gouging the material.
  • Precision machined groove in front shoe allows for edge chamfering.
  • Poly-V drive belt provides increased belt durability.
  • Ergonomically designed handle provides greater comfort and less user fatigue.
  • Replacement blades DW6654 Part Number: N447366.
Check Stock

Deflecto Aluminum Dryer Vent Elbow, Fully Adjustable, 4\

  • 4" diameter 90 degree aluminum duct elbow.
  • 4 sections riveted, each section machined together for full range adjustability, crimped at one end.
  • Fully adjustable aluminum elbow from 0 degrees to 90 degrees.
  • Light gauge, most commonly used in clothes dryer or bathroom venting.
  • Genuine replacement part, works with most major appliance brands.
Check Stock

HONESTILL AR A1 A2 Front Sight Adjustment Tool,Front Sight Post Tool,A1 A2 Style Iron Sight Adjustment Tools Accessories (37)

  • Made of quality steel with a nice black oxide finish.
  • Precision machined steel part: The edges of the prongs are sharply machined.
  • Simple & Effective Front Sight Adjustment Tool: elevation adjustment with both 4-Prong and 5-Prong for A1/A2 Front Sight Post.
  • Double-ended Design & Optimal Length for easy to use.
Check Stock

Proforged 105-10044 Billet Aluminum Tie Rod Sleeves - Manual Steering

  • CRAZY STRONG BILLET ALUMINUM TIE ROD SLEEVES. Proforged tie rod adjusting sleeves are machined from a solid bar of billet aluminum for ultimate strength. Every fit surface of these 6061-T6 aluminum sleeves are CNC machined for precision fit and finish - the threads are matched to our tie rod ends, and we recommend using them together for optimal results. These work with most other brands of tie rods, but there are occasional issues when other brands use a different thread tolerance or specification..
  • 1,000,000 MILE WARRANTY. You can install our tie rod sleeves with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
Check Stock

Vals e Lönn

  • APPLICATIONS - Compatible with Cummins ISX12, X15 and ISX15 engines with single overhead cam.
  • BENEFITS - Use to remove and install front crankshaft seal and wear sleeve without damaging the seal and leakage.
  • REPLACEMENT - This is a high-quality aftermarket product. Directly replace part numbers 4918991. Each part is manufactured to OEM specifications and....
  • QUALITY - Advanced CNC machined heavy duty steel with black anodized finish.
  • INCLUDES - The 4918991 crankshaft seal kit includes:(1)Sleeve Remover.
Check Stock

NICECNC Green Battery Cover Guard Protector Compatible with Kawasaki KLR 650 2008-2018 2017 2016 2015 2014 2013 2012 2011 2010 2009, 6061 Aluminum CNC

  • △ Super Sturdy：Made from 6061 aircraft grade aluminum of great hardness, providing strong protection for your energy battery..
  • △ CNC Machined：Machined by cutting-edge CNC technology, accuracy of each cutting part can be ensured for easy installation. Allowing you to appreciate the every little detail of the product..
  • △ Resistant to Rust：A protective film has been deposited on the product, capable of defending itself from bright sunlight, heavy rain and snow..
  • △ Perfect Fitment：Replacement For Kawasaki KLR 650 2008-2018..
  • △ Package Included: 1X Battery Cover，1X Installation Kit.
Check Stock

Innovative Performance Chip/Power Programmer compatible with Volkswagen Golf & GTI 1.4L 1.6L 1.8L 1.9L 2.0L 2.5L 2.8L and 3.2L - Improve Your Fuel Mileage Save Gas & Gain MPG Increase HP & TQ!

  • Scope of Application : Acting on 1.8 2.0 TSFI Engines EA888, Fit for IS12, IS20, IS38 IHI turbocharger..
  • Lightweight Material & CNC Machined: The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket,....
  • Max gains Design: Max gains 8-10 HP, Its made from aluminum, allowing for an organically shaped inlet that transitions gradually over a large....
  • O-Ring Kit: Supplied with the kit is a replacement O-ring in case the standard part is worn or perished. This part allows for increased potential....
  • Customer Service: If you have any question about our product, please contact us right away, we can handle any problems.We value your shopping....
Check Stock

Driven Racing 08-12 Kawasaki EX250 Halo Riser Clip-Ons (37mm) (Black)

  • Halo symbolizes a new approach built on over 10 years of experience and growth making high-end motorcycle parts..
  • Halo is part philosophy, part technology, a synergy of the two infused together to create the most advanced and beautifully designed jewels for your bike.Two-piece design makes for an easier install.Clean lines to match modern sport bikes.Machined out of.
Check Stock

Evike EMG/STI International™ DVC 3-Gun 2011 Airsoft Pistol (Model: Standard/Green Gas)

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT included unless stated. Please check the bulletpoints AND description below carefully. Federally mandated blaze orange muzzle tip is preinstalled. Some assembly may be required, especially on custom builds and some larger sized Airsoft guns ◙.
  • Highly detailed CNC machined aluminum long slide w/ officially licensed STI rollmarks.
  • CNC machined aluminum frame w/ molded reinforced polymer grips.
  • Molded DVC Stippling pattern provide a comfortable, slip-resistant grip.
  • Extended length barrel w/ gold (imitation TiN) coating.
  • Slide lightening cuts help the slide cycle faster with less felt muzzle flip.
Check Stock

New 19 inch Replacement Alloy Wheels Rims compatible with Honda Accord Sport Style EX LX LX-S V6 ALY64083U45N

  • 19" x 8” HONDA ACCORD ALLOY WHEEL RIM ONE PIECE.
  • Part Number: 42700T2AL92 / ALY64083U45N Quantity: One (1) Finish: Machined Face with Black Metal Inserts Rim Material: Alloy Rim Width: 8" Rim Diameter: 19" Offset: 55 mm Number Bolt: 5 Bolt Pattern: 5 x 114.3 Back Spacing: 6.75 Hub Bore Size: 64.1.
  • Finish: Machined Black Made to Factory Specs. Not Included: Center caps and Emblem, Lug Nuts, TPMS Tire.
  • Questions on fitment? Ask our one of our wheel techs!.
Check Stock

JDMON Compatible with Ignition Distributor Chevy GMC C1500 K1500 Pickup Isuzu Oldsmobile 4.3L V6 Vortec 1996-2007 Replace 12598210 1103976 1104078 93441559

  • Compatible with 4.3L V6 engines. Chevy ＆GMC：1996-2005 Astro，Blazer，express 2500，Jimmy，Safari，Savana 2500.1996-1998 C1500，K1500....
  • Replace Part Number：1103976, 1104078, 12598210, 93441559, 8011040570，DST1639，12570426，1104050，8011040500，1104057，GM01，GM02，841639....
  • Includes：The complete assembly of the ignition distributor including the ignition module, cap and rotor eliminates the need to use old parts or....
  • Precision Process：Precision machined bodies assure correct fit and accurate mount locations.Precision machined ground shafts assure high speed....
  • 100% Tested：All electronic module components of this ignition distributor are 100% computer tested to ensure full functionality..
Check Stock