Reviews Machined Hardware

Zigco LLC SpinRX - Tangle Proof Swivel Pulley - Boat Anchor Pulley - Anchor Pulley for Drift Boat - Pulley Block - Made in USA

  • CNC MACHINED. CNC machined boat anchor pulley from solid, aerospace-grade aluminum. The SpinRx is machined (not cast) which increases the overall durability and strength of the product. This product is designed to last and is able to withstand the abusive environment that an anchor is subjected to..
  • HARD ANODIZED. The SpinRx is hard anodized for better corrosion and wear resistance. Anodizing hardens the surface of the aluminum which makes our product bomb proof. This product is both lightweight and extremely durable..
  • ALL STAINLESS STEEL HARDWARE. The SpinRx incorporates all stainless steel hardware which allows the product to be used in both fresh and salt water environments. The stainless steel hardware combined with the anodized aluminum components prevents corrosion and increases the life of the SpinRx. This product will not rust!.
  • SEALED BALL BEARINGS. The SpinRx contains two sealed roller bearings which allow the anchor to spin independent of the anchor rope. These roller bearings are sealed, keeping out dirt and sand, and require no lubrication over the lifetime of the pulley. These bearings are high quality, stainl....
Check Stock

Baja Designs Pair LP4 Pro LED Amber Driving/Combo Light Kit

  • Housing: Hard Anodized Machined Aluminum.
  • Hardware & Bracket Material: Stainless Steel.
  • IP69K (Waterproof up to 9ft & Pressure Washable).
Check Stock

Arlen Ness 10-Gauge Mirror Right Black 13-162

  • Forged from aluminum then CNC-machined to perfection.
  • Matches many popular lines of Ness accessories.
Check Stock

Arlen Ness 10-Gauge Mirror Left Black 13-160

  • Forged from aluminum then CNC-machined to perfection.
  • Matches many popular lines of Ness accessories.
Check Stock

Mota Performance A70410 Billet Aluminum Alternator Pulley Single Groove 2.8\ Diameter

  • CNC Machine balanced Billet Aluminum construction.
  • Quality Corrosion Resistant Clear Anodized Machined finish.
  • Light weight design improves throttle response.
  • For best belt alignment use all the same brand pulleys.
Check Stock

BILLET SPECIALTIES SCRIPT LS CAST VALVE COVERS,BLACK,# BLK95423

  • Pair of Brand New Chevrolet Script LS Cast Valve Covers (Black). Produced by Billet Specialties Inc. (Part #BLK95423)..
  • Features: Precision machined Chevrolet script logo | Precision cast valve covers | Includes valve cover gasket | Includes mount hardware | Screw in aluminum oil cap.
  • Give your LS motor that classic and traditional look with Billet Specialties Chevrolet script cast valve covers. Each precision cast valve cover is powder coated Black then machined with the iconic Chevrolet script. Sold in pairs..
Check Stock

K-Edge Road Braze-on Chain Catcher

  • Fitment: All braze-on mounted front derailleurs* * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps.
  • Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs.
Check Stock

Compatible with Yamaha Road Star Warrior 5' Forward Control Extension Kit - Black Powder Coat, Stainless Steel Extension Depot

  • The extension plates are machined from 3/8" thick plate.
  • The replacement brake rod extension is machined from 1/2" solid 303 Stainless Steel.
  • The full length replacement shift rod is made from 1/2" solid 303 Stainless Steel.
  • All hardware required for the installation is included in the kit, easy install.
Check Stock

Tube Connector Adapter Weld Fabrication Bungs 1-3/4 .095 &.120 4

  • Fits 1-3/4" O.D Tube With 095 & .120 Wall I.D. Inline Tube.
  • Great weldable universal inline tube connector. Choice of many fab shops nationwide..
  • Versaslot allows you to run hardware either direction..
  • Machined slot holds nuts in place for easy tightening of hardware..
  • Sold as 2 connector halves / 2 Bolts / 2 Nyloc Nuts.
Check Stock

Supreme Suspensions - 2' Wheel Spacers Kit for 2001-2010 Ford Explorer Sport Trac 2WD 4WD - BP: 5x4.5 / CB: 87.1mm / Studs: 1/2' x20 [4pc Black Pack] - 4 Tire Valve Caps Included

  • COMPATIBLE WITH 2001 - 2010 Ford Explorer Sport Trac (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Lug Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inches Thick, 5 x 114.3mm (5 x 4.5") Bolt Pattern, 1/2" x 20 Studs, 87.1mm Center Bore | NOTE: Spacers are lug-centric, and centered using the precision machined taper seat on the lug-nuts. Centering rings are recommended for certain types of OE or Aftermarket wheels..
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Bil....
Check Stock

Grom Fender Eliminator (2016-2020) - New Rage Cycles

  • New Rage Cycles hits the market with a custom designed fender eliminator kit..
  • This kit completely cleans up the back of your bike with the brightest signals and brake light on the market! The license plate bracket is constructed from billet aluminum and black powder coated, and tucks up underneath your tail, providing a very clean.
  • This plug-and-play kit saves you time and money on installation, and lets you plug right in and ride on! LED license plate light provides you with everything you need for a very clean fender eliminator kit..
  • The turn signal lenses are CNC-machined from polycarbonate and the turn signal bracket is machined from billet aluminum..
  • New Rage Cycles uses extremely bright 1 mm LEDs, giving you outstanding turn signals...day or night! Hardware is provided with your kit should you want to mount the passenger pegs (where required)..
Check Stock

Suzuki GSXR600/750 Tail Tidy (2011-Present) - New Rage Cycles (Tucked)

  • New Rage Cycles hits the market with a custom designed fender eliminator kit..
  • This kit completely cleans up the back of your bike with the brightest signals and brake light on the market! The license plate bracket is constructed from billet aluminum and black powder coated, and tucks up underneath your tail, providing a very clean.
  • This plug-and-play kit saves you time and money on installation, and lets you plug right in and ride on! LED license plate light provides you with everything you need for a very clean fender eliminator kit..
  • The turn signal lenses are CNC-machined from polycarbonate and the turn signal bracket is machined from billet aluminum..
  • New Rage Cycles uses extremely bright 1 mm LEDs, giving you outstanding turn signals...day or night! Hardware is provided with your kit should you want to mount the passenger pegs (where required)..
Check Stock

Method Race Wheels 106 Beadlock Method Bronze 17x9" 5x5", 44mm offset 3.5" Backspace, MR10679050944B

  • Developed for the serious off-road enthusiast. Solid A356 aluminum with T6 heat treatment construction.
  • Tough 6 windowed point design with debossed METHOD logos. Reinforced inner lip provides extreme strength and durability.
  • Extra wide bead seat is 17% bigger to accommodate largest tires. Forged 6061 aluminum V.3 beadlock ring is 53% thicker and reduces deflection.
  • Recessed hardware has 360 degree protection to prevent bolt head shearing. American made Grade 8 zinc-plated beadlock hardware kit included. Redundant sets of threaded beadlock hardware holes machined into wheel.
  • Bolt-on center cap with embossed METHOD logo. Hub centric fitments for common applications. Super strong 3600 lbs. load rating. Custom bolt drilled bolt patterns and hub openings available.
Check Stock