Reviews M8 X 1 25 Thread Repair

10Pcs M12 to M8 Thread Reducer Nuts, Stainless Steel Repair Sleeve M8 Female Thread M12 Male Thread Conversion Kit Suitable for for Plumbing Connections Compressed Air Hydraulic Automobile

  • Made of 303 Stainless Steel: The reducer nut is made of durable 303 stainless steel, which is resistant to high temperature, strong and wear-resistant.
  • Wide Range of Uses: Repair nut is an industrial fastening part, mostly used in conjunction with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, a repair nut can be used to effectively repair the threaded hole.
  • Recommendations for Use: If the M8 thread is very slippery, if you want to continue to use the M8 thread after the repair, use this method to expand the M8 thread to M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because this reduces the diameter The material is stainless steel, which will make the M8 thread stronge.
  • Wide Range of Applications: These repair nuts are widely used in aviation, automobiles, electronic communications, computers, molds, mechanical equipment and other manufacturing fields.
  • Thread Size Standard: Internal thread M8 x 1.25.
  • length: about 18 mm/0.7 inches. The thread is clear, and the thread sliding tooth restoration is more accurate.
Check Stock

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

  • Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
  • Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
  • Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
  • Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
  • Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

Swpeet 135Pcs M4 M6 M8 Hex Shaped Male Thread Metal Clamping Hand Star Knobs with 304 Stainless Steel Hex Nuts and Flat Washer Assortment Kit Clamping Screw Plastic Screw-On Handle Clamping Knob

  • 【 What You Get】 ----- In this kit, You will Not only get 45Pcs M4 M6 M8 Hex Shaped Star Knob Female Thread Nut Clamping Knob Grip Assortment Kit, But also get 45Pcs M4 M6 M8 304 Stainless Steel Hex Nuts and 45Pcs M4 M6 M8 Flat Washer. You can get all of these with only one purchase..
  • 【Various M4 M6 M8 Thread】------- We have prepared three different sizes Stars Knob for you, Universally fit and can be used for most types of machine tools, This Kit Can definitely meet all your daily needs. Thread Type is metric thread M8/M6/M4, Thread Pitch:M8 x 1.25mm, M6 x 1.0mm, M4 x 0.7mm. please check the thread size you need before buying..
  • 【 Thread Size】------- M8 x 30mm/ 0.30 x 1.5inch(D*L), M6 x 20mm/ 0.23 x 0.8inch(D*L), M4 x 12mm/ 0.15 x 0.47inch(D*L).
  • M8 Head Dia (Approx): 38mm / 1.47inch, M6 Screw Knob Head Dia (Approx): 32mm / 1.26inch, M4 Screw Knob Head Dia (Approx): 25mm / 0.98inch..
  • 【Special Star Shape Design】------- This Knob are Special Star Shape Design, Great for comfortable hand grip, accord with ergonomic design and plays a non-slip effect without scratching your hands.Knob handles are made of high quality plastic for durability and long service life..
  • 【Wide Application】------- The head is made of plastic, good toughness, strong ....
Check Stock

TIME-SERT M8x1.25 Thread Repair kit P/n 1812

  • Time-Sert M8x1.25 thread repair kit P/n 1812.
  • Includes, Drill, conterbore, tap, install driver 5 inserts 11.7mm length.
  • The best thread repair on the market today!.
  • Solid bushing, self locking, positive placement repair.
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Swpeet 60Pcs M6 x 40 Hex Shaped Male Thread Metal Clamping Hand Star Knobs with 304 Stainless Steel Hex Nuts and Flat Washer, Clamping Screw Plastic Screw-On Handle Clamping Knob (M6*40)

  • 1,【 What You Get】 ----- In this kit, You will Not only get 20Pcs M6 x 40 Hex Shaped Star Knob Female Thread Nut Clamping Knob Grip Assortment Kit, But also get 20Pcs M6 304 Stainless Steel Hex Nuts and 20Pcs M6 Flat Washer. You can get all of these with only one purchase..
  • 2,【Various M4 M6 M8 Thread】------- We have prepared three different sizes Stars Knob for you, Universally fit and can be used for most types of machine tools, This Kit Can definitely meet all your daily needs. Thread Type is metric thread M8/M6/M4, Thread Pitch:M8 x 1.25mm, M6 x 1.0mm, M4 x 0.7mm. please check the thread size you need before buying..
  • 3,【 Thread Size】------- M8 x 30mm/ 0.30 x 1.5inch(D*L), M6 x 20mm/ 0.23 x 0.8inch(D*L), M4 x 12mm/ 0.15 x 0.47inch(D*L).
  • M8 Head Dia (Approx): 38mm / 1.47inch, M6 Screw Knob Head Dia (Approx): 32mm / 1.26inch, M4 Screw Knob Head Dia (Approx): 25mm / 0.98inch..
  • 4,【Special Star Shape Design】------- This Knob are Special Star Shape Design, Great for comfortable hand grip, accord with ergonomic design and plays a non-slip effect without scratching your hands.Knob handles are made of high quality plastic for durability and long service life..
  • 5,【Wide Application】------- The head is made of plastic, good toughness, strong ant....
Check Stock

M8 x 1.25mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT

  • Metric M8 x 1.25mm x 1.5D thread repair kit.
  • Include: 10pcs stainless insert, tap and 8.3mm drill bit..
Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

  • Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
  • Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check Stock

LT Sport Manual Transmission Gear Shift Knob Stick Shifter Boot Cover Black PVC Leather

  • 【Material】Shift knobs made with high quality plastic with carbon fiber pattern and adapters made with aluminum..
  • 【Unique style】Round ball, carbon fiber style, easy to hold the shift..
  • 【Size】Diameter: 2"（50 mm), Height: 1.9"(49.6 mm) Thread of shift: M12*1.25 Thread of 3 adapters (M8*1.25, M10*1.25, M10*1.5).
  • 【Universal Fitment】Gear Shift knob Fits for most manual cars' shifter, such as for Acura, for Honda, for Mazda, for Mitsubishi, for Toyota, for Scion, for Nissan, for Infiniti, for Subaru and more..
  • 【Package Include】 1*shift knob(M12*1.25), 3 adapters (M8*1.25, M10*1.25, M10*1.5)Note: 1.Please make sure if your shifter thread is one of M12*1.25, M10*1.25, M10*1.5, M8*1.25.
Check Stock

iexcell 20 Pcs M8 x 30/35/40/45/50 mm Stainless Steel 304 Hex Socket Head Cap Screws Bolts Assortment, Fully Threaded

  • Screw Drive Style: Internal Hex, Hex Size 6 mm.
  • ✔ Thread Dia.: 8mm, Thread Pitch : 1.25mm.
  • ✔ 5 Sizes: M8 x 30mm, M8 x 35mm, M8 x 40mm, M8 x 45mm, M8 x 50mm, Fully Threaded.
  • ✔ Stainless Steel 304, Anti-corrosion in Various Environments.
  • ✔ Package : Total 20 Pcs Hex Socket Head Cap Screws, 4 of Each Size, Come in an Easy-use Separated Girds Storage Box.
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

  • Easy to Identify: 28 size nut and bolt identification tool ruler is easy to distinguish between metric and inch thread sizes, and can verify the sizes and thread pitches of standard hardware, so you don't need to worry about the size of fasteners you have any more.
  • Metric Thread Sizes: -M4 x 0.7 -M5 x 0.8 -M6 x 1.0 -M7 x 1.0 -M8 x 1.0 -M8 x 1.25 -M10 x 1.0 -M10 x 1.25 -M10 x 1.5 -M12 x 1.25 -M12 x 1.5 -M12 x 1.75 -M14 x 1.5 -M14 x 2.0.
  • Bolt Size and Thread Gauge: bolt and nut identifier gauge measures the bolt length and nut diameter quickly, and identifies hardware from #6 to ½" and 4mm to 14mm.
  • Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
  • The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
  • Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
  • Sturdy and Durable: the bolt identifier is made of ....
Check Stock