Reviews M42 Bimetal

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

M MOKENEYE 155mm/6.1 inch Hole Saw Bi-Metal Wood Hole Saw Drilling Tool for Cutting Board Metal, Plastic, Fiberboard, Wood

  • 【HIGH-QUALITY MATERIAL】- The 155mm/6.1 inch hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength..
  • 【PRODUCT SIZE】- Cutting Diameter: 6.1".
  • 【WIDE APPLICATION】- This hole saw blade is perfect for installing locks, knobs in doors and cabinets or drilling larger, diameter holes through desks or bench, air ducts, ceiling lights, speakers and more..
  • 【FAST & SMOOTH CUTTING】- The sharp tooth edge design makes the cutting smooth and fast. The spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole..
  • 【LIFETIME GUARANTEE】- M MOKENEYE aims to ensure the highest customer satisfaction and the greatest efficiency of our products. If you have any question, please contact us, we will try our best to meet your demand..
Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....
Check Stock

ASNOMY 12Pcs M42 HSS Bi-Metal Hole Saw Set, 11/16 inches - 3 inches Large Size Hole Opener Hole Saw Cutter Tool for Drilling Cornhole Board, Plastic, Pipe, Wood, Fiberboard, Soft Metal

  • 12PCS Bi-Metal Hole Saw Kit: Include 11/16″(18mm) , 13/16″(20mm), 15/16"(24mm), 1-1/8"(28mm), 1-3/16"(30mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(45mm), 2"(50mm),2-3/16"(55mm),2-9/16"(65mm), 3"(75)mm,a variety of sizes can meet your different needs,the cutting depth is 1-3/16"(30mm). Each hole saw has a arbor with drill bit..
  • Top Quality: This Hole saw set made from M42 HSS and Bi-Metal,make it have higher hardness (≥64HRC) and higher toughness than standard hole saw, better cutting performance, so that it can cut ceiling tiles and gypsum board smoothly.
  • Cutting is more efficient and clean: The hole cutter made of heavy-duty bimetal and unique sharp HSS has sharper teeth, and has four chip evacuation holes, which has more powerful chip evacuation capability. Make it possible to quickly remove the cutting material, and the cutting edge is smoother.
  • Wide Application: This 4 hole Saw blade perfect for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP..
Check Stock

Fotasy M42 Lens to F Mount DSLR Adapter 42mm Screw Mount Lens to Nikkor Adapter Compatible with Nikon D5 D4S D4 Df D3 D850 D810 D800 D750 D610 D7500 D7200 D7100 D7000 D5200 D5300 D5500 D5600 D3400

  • M42 lens to F Mount Adapter, It allows M42 42mm Screw Mount Lens to fit on Nikkor F Mount DSLR.
  • INFINITY Focus NOT ALLOWED. Focus Disantance is limited to 1-2 Meters..
  • Fits M42 lens, eg Pentax Takumar lens, Zeiss m42 lens, Helios M42 Lens etc.
  • There is no electrical contacts in the adapter ring. Exposure and focus has to be adjusted manually. Automatic diaphragm, auto-focusing, or any other....
  • Compatible with Nikon DSLR D5 D4S D4 Df D3 D850 D810 D800 D750 D610 D7500 D7200 D7100 D7000 D5200 D5300 D5500 D5600 D3400 D3300 etc.
Check Stock

BOSCH CO14B 14 Pc. Cobalt M42 Drill Bit Set

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

BOSCH CO21B 21 Pc. Cobalt M42 Drill Bit Set

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

Topline Cutting Tools No. 7 Drill Bits Cobalt M42 4-Pk

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

Fotasy M42 Lens to Sony E-Mount Focusing Helicoid Adapter, 42mm Screw Mount lens to E-Mount Macro Extension Tube, fits Sony a3000 a3500 a5000 a5100 a6000 a6100 a6300 a6400 a6400 a6500 a6600

  • M42 Lens E Mount Macro Focusing Helicoid Tube, M42 Lens to Sony E-Mount Helicoid Adapter, allows M42 Screw Mount Lens (eg Pentax Super Takumar, Helios etc) to fit on E-mount camera body..
  • This Helicoid tube offers a total of 32mm movement distance for Lens focusing. It can works as a standard M42 lens to E-Mount Adapter and allows M42 Lens Focus to Infinity..
  • There is no electrical contacts in the adapter ring Automatic diaphragm auto-focusing or any other functions will not operated with using this adapter.
  • Compatible with Sony a7 a7r a7S II III IV a9 a9II a7c Alpha 1 NEX5T NEX-6 NEX-7 NEX-F3 a3000 a3500 a5000 a5100 a6000 a6300 a6400 a6500 a6600 ZV-E10 and new models..
Check Stock

BOSCH CO2159B 1/2 In. x 6 In. Cobalt M42 Drill Bit

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

REOTEMP K79-2 Pocket Thermometer, Waterproof, 5\ Stem, 1\ Dial (-40 to 160 Fahrenheit)

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±3 degrees Fahrenheit, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Taylor 6235J 2\ Dial Bi-Metal Test Thermometer, 8\ Stem, 10C/110C, 1% Accy

  • Reliable and Rugged - For a variety of uses: A/C testing, dark room, food inspection, science class, laboratory and thousands of other uses..
  • Quick Response - A combination of responsive bimetal element and thin stem make our pocket thermometer quick to respond..
  • Waterproof and Dustproof - Hermetically sealed dial makes it easy to clean and will not fog up if rinsed off. Comes with a pocket protector for storage..
  • Sensitive Bimetal Element - Accurate to ±3 degrees Fahrenheit, this thermometer has a quality bimetal coil that comes calibrated and ready to go..
  • 304 Stainless Steel & Glass Construction - Quality construction ensures our pocket thermometer will last long term..
Check Stock

Fotasy M42 Lens to Nikon Z Helicoid Adapter Nikon Z Macro Focusing Helicoid Extention Tube M42 Nikon Z Adapter fits 42mm Screw Mount Lens & Nikon Z Z5 Z50 Z6 Z7 Z6 II Z7 II Mirrorless Cameras

  • M42 Nikon Z6 Adpater, M42 Nikon Z7 Adpater, Macro focusing Helicoid tube allows M42 Lens to fit on Nikon Z Mount Mirrorless Camera Body..
  • It can works as a standard M42 - Nikon Z mount adapter and allows lens focus to infinity.
  • This helicoid tube offers a total of 32mm movement distance for Lens focusing.
  • M42 Z Focusing Helicoid Adapter is compatible with Nikon Z Mount Mirrorless Camera Z5 Z50 Z6 Z7 Z6 II Z7 II.
Check Stock