Reviews M2 Hss

COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • ... bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project..
  • HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a index case, convenient to use and carry..
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor includes #1, #2, #3, #4, #5. Left hand drill bit model includes 5/64", 7/64", 5/32", 1/4", 19/64"..
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • ... drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. Countersink replacement bits set with tapered drill bits. Top Quality 11/64 inch tapered and double flute drill bit.
  • HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2345P countersink replacement drill bit set for drill bits with countersink.
  • STORAGE CONTAINERS for this set available below, at section " Make it a bundle". Replacement counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

New 5 Pcs 1/2' x 1/2' x 4' HSS Square Tool Bit Lathe Fly Cutter Mill Blank M2

  • 5 Pc 1/2" x 1/2" x 4" HSS Square Tool Bit Lathe Fly Cutter Mill Blank.
  • Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
  • Tool Bits Made Of HSS Show Exceptional Results On Mild Steel, Alloys And Tools Steels.
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

12 PCS,1/4\

  • Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability..
  • Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63..
  • Package & Size: 12 Pieces in a plastic bag, Diameter 5/16 inch, Total length 4 inch, Working length 2-3/4 inch..
  • Professional & DIY Use: For use on metal, wood & plastics. Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles..
  • 135 Tip & Twist Design: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster..
Check Stock

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • ...ountersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill bit set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit for wood countersink set, drill bits Secured with Pin. FTG 4TO12P Maximum Torque countersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report confirms that drill bits set Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits with Improved Connection Drill Bit with 1/4 Hex Shank and Allen Wrench,

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set....
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable....
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with....
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider....
  • Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report....
Check Stock

COMOWARE Center Drill Bit Set - Countersink Lathe Mill Tooling Set, HSS, M2

  • HIGH QUALITY CARBIDE MATERIAL: The center drill bit is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • PLAIN STYLE 60°ANGLE: Center drill bit can be used to process the centering hole and countersink of general material. Plain style 60°angle can guide twist drill bits to process holes..
  • SPIRAL FLUTE: Spiral groove helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. The precision ground surface is corrosion resistance to achieve better using effects and prolong the working life..
  • WIDE APPLICATIONS: It is suitable for mold steel, carbon steel, cast iron, stainless steel, thread mold, a material with high hardness, wear-resistance and toughness for precise positioning before drilling, so as to facilitate the efficiency of subsequent drilling..
  • SET INCLUDING & LIFETIME GUARANTEE: Total 5 pieces center bits(#1,#2,#3,#4,#5) with Box Package can be used to drill holes in different sizes. We stand behind all of our high quality products so we offer a lifetime No Question on our drill bits. Please contact us (through Amazon if past the standard r....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • ... with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits.. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits, professional countersink drill bits set with countersinks for wood. FTG2348 counter sinker drill bit for wood.
  • STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meets desired specs of HSS M2 Grade 6542 harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits.
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock