Sadlak Industries M14/M1A Gas Cylinder Wrench - Aluminum 1/2 Thick
- M1Surplus Optics Kit For Springfield M1A M14 Rifles !.
- Hi-Power 8-32x50 Rifle Scope With Tactical illuminated RANGE ESTIMATING Reticle.
- Low Profile Scope Mount Rail For M1A Rifle - "REQUIRES FITTING".
- Includes Tactical Black Stock Riser Cheek Rest, Sunshade, Flip-up Lens Covers And Aluminum Scope Rings.
Check StockCleaning Promat by Cerus Gear with Springfield M1A Schematic Rifle Graphics, Versatile Gun Cleaning Mat, Great for Any Desk or Work Bench – 12 x 36 Inches
- PELLET AIR GUN: The M1A underlever spring-piston pellet rifle is a classic rendition of the M14. With a caliber of 0.177″ or 0.22″ and a barrel length of 18.9″, this wood-stock pellet rifle has what it takes for target shooting and hunting small game!.
- QUALITY MATERIALS: Each underlever pellet gun features a wood stock for historic accuracy and a smooth finish. The single-shot pellet rifle has a steel metal barrel, and the recoil pad has a rubber insert for added safety..
- UNDERLEVER ACTION: Our high-powered pellet rifle has an underlever design with the cocking lever located underneath the barrel. This pellet rifle has a cocking effort of about 35 lbs., which is made easier when you use the extendable cocking lever..
- SAFE & SECURE LOADING: This pellet gun is a good choice for beginners. It features an anti-bear-trap safety mechanism that prevents the loading chamber from closing while you load pellets into the chamber. The M1A also has a two-stage trigger..
- FIRING MECHANISM: Since the M1A is a pellet rifle gun, it fires pellets using a coiled spring. This powerful pellet gun has a high velocity of up to 1,000 fps for the 0.177-caliber version and up to 800 fps for the 0.22-caliber version..
Check StockSpringfield Armory M1A Underlever Pellet Rifle Wood-Stock Air Rifle 0.22 Cal
- PELLET AIR GUN: The M1A underlever spring-piston pellet rifle is a classic rendition of the M14. With a caliber of 0.177" or 0.22" and a barrel length....
- QUALITY MATERIALS: Each underlever pellet gun features a wood stock for historic accuracy and a smooth finish. The single-shot pellet rifle has a....
- UNDERLEVER ACTION: Our high-powered pellet rifle has an underlever design with the cocking lever located underneath the barrel. This pellet rifle has....
- SAFE & SECURE LOADING: This pellet gun is a good choice for beginners. It features an anti-bear-trap safety mechanism that prevents the loading....
- FIRING MECHANISM: Since the M1A is a pellet rifle gun, it fires pellets using a coiled spring. This powerful pellet gun has a high velocity of up to....
Check StockCase Club Springfield M1A Pre-Cut Waterproof Rifle Case with Accessory Box and Silica Gel to Help Prevent Gun Rust (Gen 2)
- Pre-cut foam holds a single factory Springfield M1A Scout Squad, SOCOM 16, Standard, Loaded, National Match, Super Match, or Garand Rifle (Not meant to fit Springfield M1A CQB stock).
- Holds up to six 10 round magazines, or three 20 round magazines & accommodates all major optics mounted either in the forward position or above the rear sight.
- Stainless steel added to padlock points for added security, Orange peel texture added to exterior finish to minimize scratches, Structural ribs added to outside of case for increased durability, Front handle length increased to help counter balance off center weighted loads, Wide bodied snap latches that can be used with gloves.
- Foam insert is (closed cell) high grade polyethylene which can be wiped clean.
- Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof.
Check StockBulldog Smart Airsoft Battery Charger for 8.4v to 9.6v Ni-MH / Ni-CD [Compact]
- Peak performance pack - Tenergy’s high performance batteries provide more playtime.
- our 8.4V 3800mAh NiMH rechargeable battery made of 7 cells Sub C NiMH batteries..
- Ideal AEG battery power – Tenergy 8.4V NiMH battery designed to fit M16, SR16, full stock AK series, and full stock MP5 series: G&P M16A1, KNIGHTS SR16, MP5 SD5, MK5A4, G3 SD1, M16VN, CA G3 SG1, G3 A3, FAMASF1, M1A1, ASSV, PSG1 and RC cars/planes with Standard Tamiya Connector. For upgraded and/or modified AEGs, we recommend finding connector and measuring the gun compartment for best fit..
- Fast charge and lasting capacity - Tenergy's AEG battery features rapid charge up, long runtime, and compatibility with the Tenergy 6V-12V RC battery charger..
- Battery pack configuration - Tenergy electric gun battery dimensions: 6.13" (length), 1.9" (width) and 1.0" (height). Weighs 15.2 oz..
- Large Tamiya connector - The airsoft replacement battery pack with Tamiya battery pack connector, standard Tamiya female connector assembled with 16 G wire..
Check StockTOURBON Right Handy Adjustable Buttstock Cheek Riser Pad Rifle Shell Holder
- Tourbon cheek rest made of tactical nylon and neoprene.
- Designed to hold up to 10 rifle shells, 2 pockets and 3 size EVA foam cheek pad will help keep you on target.
- Adjustable webbing cinch straps with buckle closure..
- The cheek pieces fit for Tikka T3X , Browning AB3 , Savage FCP-SR ,.308 Ruger American , Springfield Armory M1A , Rem. 700 , Ruger Predator Rifle , Howa 1500 , Savage 10FP , Savage 11 , M1A Scout Squad and so on.
Check StockM1Surplus Optics Kit with Tactical Red Green Dot Quick Detach Scope + Weaver Style Rail Scope Mount for M1A Rifle
- M1Surplus Optics Kit For Springfield M1A Rifles !.
- Quick Detach 38mm Red Green Dot Scope And Scope Mount Rail.
Check StockM1SURPLUS Tactical Black Cheek Rest + USA Flag Patch Fits Mauser 1891 K98 98 M24 24/47 M48 M93 G98 VZ 98/22 Mosin Nagant 1891 91/30 M38 M1 M1A Garand Lee Enfield Springfield 1903 Swiss K31
- Tactical Black Cheekrest With Integral Stock Riser + COME AND TAKE IT Morale Patch + Detachable Accessory Pouch !.
- Ambidextrous Design Can Be Used Left Or Right Handed.
- Fits Mauser 1891 K98 98 M24 24/47 M48 M93 G98 VZ 98/22 Mosin Nagant 1891 91/30 M38 M1 M1A Garand Lee Enfield Springfield 1903 Swiss K31.
- This item Cannot be Exported Outside the USA.
Check StockPETFAT Sadlak Industries M14/M1A Cleaning Drill Set
- Sadlak Industries M14/M1A Light Duty Aluminum Front Rail.
- Once the Front Rail is installed you have flexibility of attaching a clamp-on type Bi-Pod.
- All hardware and screws have mil-spec. Manganese Phosphate finish..
Check StockSADLAK M14/M1A Front Rail, Aluminum Low Profile Rail
- Sadlak Industries M14/M1A Light Duty Aluminum Front Rail.
- Once the Front Rail is installed you have flexibility of attaching a clamp-on type Bi-Pod.
- All hardware and screws have mil-spec. Manganese Phosphate finish..
Check Stock