Reviews M14 X 1 5 Thread Repair Kit

ZKTOOL 14mm Cylinder Head Rethreaded Kit, Spark Plug Thread Repair Kit,14mm Reamer Cylinder Thread Repair Tool,Spark Plug Rethreader Kit,4 Thread Insert. M14 x 1.25

  • Choice: The thread repair tool kit is a tool for spark plug repair. This tool does not require any difficult operation and is suitable for everyone. For the convenience of use, you can add some thread locking agent, (Rethread Aluminum Heads Only)..
  • Advantages: Chrome vanadium steel (CR-V) 14mm 12-point threaded reamer with a total length of 2.5 inches and four 3/8-inch, 7/16-inch, 1/2-inch and 3/4-inch carbon steel blades. Compared with similar products, we have optimized the quality. Will not be easily damaged..
  • Operation: Repair and repair the chrome vanadium steel (CR-V) M14 x 1.25 internal thread size on the sleeve by cutting the thread, and repair the plug in the aluminum head. The socket includes a metal retainer for fixing the plug inside during installation and removal..
  • Packaging: The re-threading kit includes a tapping reamer and 4 blades of different sizes and depths for your convenience..
  • Service: We provide product package return and exchange service for a better customer experience. If you have any questions, please contact us, we are online 24 hours.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
Check Stock

Compression Tester Automotive - 8PCS Engine Cylinder Pressure Gauge for Petrol Gas Engine Automotive Tool Gauge for Car & Truck

  • ...1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm. Pressure gauge diameter: 75mm, four thread size: M10 x 1.0mm, M12 x 1.25mm, M14 x 1.25mm, M18 x 1.5mm. M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
  • 【100% SATISFACTION】: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

  • Extremely stable performance: This thread helical coil repair tool kit is made of high speed steel and red color plastic handle, sturdy and durable in use and can be used in daily repair, car repair, drilling machine, etc.
  • Made of stainless steel of good rust and corrosion resistant..
  • Excellent practicability: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc..
  • Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
  • All accessories are integrated in a box for convenient transportation and carriage..
  • Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and da....
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Aramox Tap Tool,2Pcs Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5

  • 100% brand new and high quality spark plug thread insert tap repair tools.
  • With the size of M10 * 1.0 / M12 * 1.25, M14 * 1.5 / M18 * 1.5.
  • A nice tool kit for repair damaged spark plug installing threads.
  • Made of hardened carbon steel, these accessories are of strong strength and long durability.
  • Easy to use and operate. Come and have a try.
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

  • [Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
  • 131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
  • [Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
  • Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
  • [Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
  • Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
  • [Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
  • Inserts are heat-treated for long-lasting strength.
  • [Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.
Check Stock

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

  • Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
  • Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
  • Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
  • Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
  • Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check Stock

Thread Checker Lug Nut & Wheel Stud SWTC-LN8 Bundle with a Lumintrail Keychain Light

  • Lug Nut Thread Checker - Each size has a lug nut and wheel stud checker on the same gauge. Thread sizes are permanently stamped onto each gauge..
  • Wire Cable Thread Checker - The individual gauges rotate freely on the wire cable for fast thread verification..
  • Durable Tools - Built to last & manufactured from high grade aluminum..
  • The Lug Nut Thread Checker is an accurate and easy-to-use thread identifier for both lug nuts and wheel studs. Each individual gauge features a male threaded stud on one end to measure lug nut threads and a female threaded hole on the other to measure wheel stud threads..
  • Thread Gauge Size Specifications by Color: M14 x 2.00 - Gold.
  • 1/2-20 - Black. Bundle with a Lumintrail Keychain Light.
Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

Qjaiune 2pcs M14x1.5 Tap M14 Metric Thread Tap Right Hand Thread Tapping Tool HSS Thread Milling Taps M14 x 1.5 Taper & Plug Tap

  • ✿M14x1.5 Machine Tap: This mini thread tap has a standard size, which can machine threads on most metals, and can also be used to repair damaged or blocked threads..
  • ✿High Quality Material: Metric tap is made of high-quality high speed steel, with high hardness and strong wear resistance. It can be used on tapping machines, drilling machines and CNC lathes..
  • ✿Wide Range of Application: M14 x 1.5 tap has high hardness and can be used for thread processing on metal, iron, copper, aluminum alloy, stainless steel, zinc and other metal materials..
  • ✿Package Contains: 2 x M14x1.5 Metric Tap (Taper & Plug Tap), Thread Diameter: 14mm, Pitch: 1.5mm, Total Length: 2.91 Inch / 74mm, Working Length: 1.26 Inch / 32mm, Shank Diameter: 0.42 Inch / 10.6mm..
  • ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock