Reviews M bus To Modbus

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

Perytech Logic Analyzer PLA-32128-200MS/s, 32 Channel, 128K Memory per Channel

  • Hardware Function: Data Filter, Noise Filter, Width Trig, Trig Delay.
  • Software Function: Bus Decode, Packet List, Bus Data Export, Bus Packet Trig, Move Synchronously, Bus Analog Display.
  • Bus Decode: I2C, SPI, UART, I2S, PS2, 1-Wire, USB 1.1, S/PDIF, SD, CAN Bus, Lin Bus, 3-Wire, Microwire, SSI, Miller, Manchester, SM Bus, Modbus.
Check Stock

EPEVER 100a mppt Solar Charge Controller, 12v/24v/36v/48v Auto Max 150V 7500W Input Power fit for Sealed/Gel/Flooded(Tracer10415AN)

  • Tracer AN series adopts Negative Ground Design controller.
  • 12V/24V/36V/48V Auto identifying system voltage, 100 amps mppt controller..
  • Support 4 battery charging: Sealed, Gel, Flooded and User. Battery temperature compensation function..
  • RS-485 communication bus interface and Modbus communication protocol let this mppt Solar Charge Controller available meet various communication requirements in different situations..
Check Stock

Red Lion Controls/N-Tron CR30000400000310 4.3\ Widescreen HMI with 3 Serial, 1 Ethernet, 1 USB Host, USB Device, Web Server and Data Logging

  • Compact, rugged, industrial-grade RS-485 device server.
  • Modbus RTU to Modbus TCP protocol converter, Modbus gateway for master and slaves.
  • Supports TCP and UDP for both Server and Client modes, support Httpd Client mode.
  • Designed for harsh industrial environments, 15kV ESD and 600W surge protection, Operating temperature: -40ºF to 185ºF / -40ºC to 85ºC.
Check Stock

Benchtop Digital Resistance Tester High Accuracy DC Resistance Meter Micro Ohm Meter Tester 1u-20M Ohm RS232 Handler Built-in Comparator 3.5'' TFT LCD AT516 for Testing Various Electronic Components

  • AT516 DC Resistance Tester is a benchtop instrument with fully automated real-time detection controlled by a high-performance ARM microprocessor..
  • The instrument has an accuracy of 0.05% and a measurement range of 1μΩ~20MΩ. The resistance value is displayed in 5 bits with 30000 readings and a maximum sampling speed of 7ms. The instrument has built-in temperature compensation interface to compensate for errors due to temperature..
  • The instrument has built-in 14-step comparator output, which can set 10 qualified files, and all the comparator results can be output through the Handler interface..
  • The instrument comes standard with RS-232 interface, using SCPI (Standard Command for Programmable Instrument standard command set) and Modbus protocol (Modbus has become the national standard GB/T19582-2008) applied to automatic sorting system to complete automatic pipeline test. Communicate with computer, PLC or WINCE device to efficiently perform remote control and data acquisition functions..
Check Stock

EPEVER 100A MPPT Charge Controller 48V 36V 24V 12V Auto 100 amp Solar Controller MPPT Negative Ground Max 150V Input fit for Litium Sealed AGM Gel Flooded User Battery

  • Tracer AN series MPPT Charge Controller: 12V/24V/36V/48V Auto identifying system volt. Auto control system to limit the charging power & current go....
  • 100 amp Charge Controller Max Input Solar Panel Power: 1250W/12V, 2500W/24V, 3750W/36V, 5000W/48V. Max input Voltage: 150V. Real-time energy recording....
  • 100A Solar Controller MPPT support for 4 type Battery charging: Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (Not for Lithium). Battery....
  • RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations..
  • Solar Regulator Mppt can be widely used for various applications, e.g. solar RV, household system and industrial field monitoring, etc. The stocks....
Check Stock

EPEVER 60A MPPT Charge Controller 48V 36V 24V 12V Auto, 60 amp Negative Ground Solar Controller MPPT Max 150V Input fit for Litium Sealed (AGM) Gel Flooded User Battery

  • Negative Ground Tracer AN series MPPT Controller: 12V/24V/36V/48V Auto identifying system voltage. Auto control system to limit the charging power & current go over the rated value..
  • Max Input Current: 60 amp: Max Input Solar Power: 750W/12V 1500W/24V 2250W/36V 3000W/48V.
  • Real-time energy recording and statistical..
  • 60A Mppt Charge Controller support for 4 type Battery charging : Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (couldn’t set Lithium). Battery temperature compensation function to ensure the controller’s life..
  • RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations..
  • The stocks starting from August 2020 are all upgraded versions that support lithium batteries.Please always connect the battery before connect the solar panel..
Check Stock

M.2 SATA SSD to USB 3.0 External SSD Reader Converter Adapter Enclosure with UASP Support NGFF M.2 2280 2260 2242 2230 SSD with Key B/Key B+M

  • External SSD Hard Drive Disk USB Reader Enclosure with UASP (M.2 SSD in picture is not included).
  • Plug and Play, no need drivers, support Hot-swap, easy to use.
  • Connector Type: NGFF M.2 SSD to Micro USB3.0, High Read and Write Speed Up to 6Gbps/s.
  • Aluminum Alloy Material-- Light, Portable & Beautiful, Maximize Heat Dissipation increase your drive's optimal performance and a longer life span.
  • Compatible with SATA-bus NGFF M.2 2280 / 2260 / 2242 / 2230 SSD with Key B / Key B+M Only (Note: Only fit for SATA-bus NGFF M.2 SSD with Key....
Check Stock

LA1010 USB Logic Analyzer, 16 Channels 100MHz Digital Logic Analyzer, Adjustable Threshold PWM Output, for Windows XP/7/8/10 (32bit/64bit), for Mac OS, Linux

  • BRIEF INTRODUCTION: 100M high sampling rate, 16 channels, 10G depth, multi-logic level threshold voltage adjustable. Supports multiple protocol parsers and integrates 2-channel PWM generators. Ideal tools for system development and debugging such as MCU, ARM, FPGA, etc..
  • POWERFUL SOFTWARE: The supporting software and resources can support Chinese and English, and the Chinese and English software languages can be adjusted. It supports for Windows XP/7/8/10, for Linux, for MAC OS and other operating systems. It is more powerful and better than oscilloscope in digital signal analysis..
  • BASIC PARAMETERS：Input channels number: 16.
  • Sampling rate: 100M@3CH, 50M@6CH, 32M@9CH, 16M@16CH.
  • USB 2.0 interface, Max sampling depth: 10G.
  • SUPPORTED STANDARD PROTOCOLS: UART/RS232/485, I2C, SPI, CAN, SDID, DMX512, I21/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, SMBus, UNI/O. USB1.1, NEC Infrared, parallel, PS/2, etc.
  • FEATURES: Data display in decimal/hexadecimal/2/ASCII format is convenient for observation and analysis. Both sampling data and analytical data can be exported, which is convenient for archiving or other analysis software..
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

HLT M.2 (NGFF) Key M NVMe SSD Extension Cable Extender PCIe3.0 x4 Full Speed

  • 1.Wire advantage, using German patented imported wire, using china Taiwan High quality connector, high frequency support PCIe 3.0 stable transfer..
  • 2.Supports only M.2 key M interface SSD, No additional power required.
  • 3. Supports Windows XP, Vista 32/64, Windows 7, Windows 8 Windows 10, or Linux.
  • 5.Supports only NVME PCI-E bus SSD, not suitable for SATA bus SSD.
Check Stock

Cuddle Barn | Wheelie 8

  • MEET WHEELIE - Wheelie is everyone's favorite school bus friend! Wheelie is an 8" long school bus that bops to the classic children's song "Wheels on the Bus.".
  • MOUTH MOVEMENT & LIGHTS - Wheelie features mouth movement that syncs up with the lyrics of the song and flashes his headlights along with the tune!.
  • BATTERIES INCLUDED - Wheelie operates on 3AA batteries that are already included! Remove pull tab when you first receive the plush toy to activate the batteries. Ensure that the battery compartment located on his underside is switched to the "ON" position. Unscrew battery compartment to replace batteries..
  • FUN & MEMORABLE TO ALL - Cuddle Barn toys stand out from all the rest! Cuddle Barns animated plush toys and soft plush friends make the perfect gift that will bring endless smiles and lasting memories to all. Ages 12M+.
  • MATERIALS & CARE - Made with a soft polyester material with printed details on fabric. Comes in polybag to protect it during transit. If wheelie gets dirty, we recommend using a damp towel to spot clean as to not damage the module inside..
Check Stock

AlveyTech 1.0 Meter Dynamic Joystick Bus Cable for Invacare Power Chairs with SPJ Joystick Controllers

  • The joystick bus cable for Invacare power chairs is compatible with SPJ , SPJ with PSS, and the SPJ with ACC joysticks..
  • Some models that are known to have this joystick controller and that would need this cable are Invacare Pronto models M41, M50, M51, M61, M71 and M91..
  • Invacare compatible part number: 1127293.
Check Stock