Reviews Luxnwatts Ender 3s

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

ANYCUBIC Vyper 3D Printer Auto Bed Leveling 3th Gen Upgrade FDM Metal FDM 3D Printers with TMC2209 32-bit Silent Driver Fast 3D Printing Large Build Size 9.6 x 9.6 x 10.2 Easy Assembly

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free....
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable....
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit....
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

  • 【Upgrade Independent development】CR Touch is upgraded to a metal probe, Exquisite exterior design，Positioning accuracy ≤0.04mm , Automatic....
  • 【Easy to install and easy to use】Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it....
  • 【Widely Application】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit motherboard.(Don't work....
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

Creality CR Touch Auto Bed Leveling Sensor Kit. Creality Official Specially Designed for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times..
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience).
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock

Creality Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro Constant Temperature Protective Cover Room

  • Constant Temperature: Creality 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when....
  • Inner Size: 17.5*22.2*26.9 inch. Compatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A good mate for your 3D printing..
  • Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself....
  • Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room. There are....
  • Extensive functionality: Dustproof and good noise reduction. Our 3D printer tent can reduce noise to a certain extent when printing, It can be used as....
Check Stock

LANMU Glass Bed Clips Clamps Compatible with Ender 3/3 Pro/3 V2/3S,Ender 5/Plus CR-10/10S Pro,CR-20 PRO Adjustable Stainless Steel 3D Printer Heated Bed Clips（Pack of 4）

  • Adjustable Glass Bed Clips: Ideal tight and stay clip for 3D printer bed, allow you to adjust the clip freely according to the thickness of the....
  • Upgrade 3D Pinter Platform Clips: Made of high quality stainless steel material, it is not easy to bend or break. It works better than original binder....
  • Easy to Use: Easy to install and remove, able to hold the glass and tightly in place but will not damage the bed, convenient to use.You can clamp them....
  • Wide Compatibility: These 3d printer bed clips can match with Creality Ender 3 pro, Ender 3,Eder 3S, Ender 3 V2,Ender 5, Ender 5 Pro,Ender 5....
  • Warranty: LANMU provides a lifetime warranty and friendly after-sale service including 30-day unconditional money back and 180-day free replacement if....
Check Stock

HICTOP Ender 3 pro Upgrades Glass Bed Double Sided Upgraded Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature.
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers.
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a superplate surface.
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

HICTOP Upgraded New Version Ender 3 pro Glass Bed One Side Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on one side and the coat material is better than the both sides one, it is much more stable and not easy to remove. We can send you new one for free if it peels off in 3 monthes.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers..
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a super plate surface..
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock