Reviews Lutron Interface Module

GETINLIGHT Dimmable Hardwired Only Under Cabinet LED Lights 12-inch Daylight White 5000k Matte White Finished ETL Listed IN-0201-11-WH-50

  • This under cabinet light is HARDWIRED ONLY, NO PLUG-IN OPTION AVAILABLE..
  • 12" length x 3.5" width x 1" height. ETL listed ensures that it is safe to use..
  • 5 watt built-in LED module, comparable to a 40 watt incandescent. 300 lumens. 5000K color temperature is similar to incandescent fixtures, 90 CRI..
  • Multiple knock outs for optimized hardwire installation, 1" thickness that hides perfectly under the cabinet..
  • Dimmable with most wall dimmer switches. Dimmers tested compatible: GE 18023, Lutron Diva DVCL-153P, Lutron Diva DV-600P, Lutron Skylark SLV-600P..
Check Stock

Legrand, Home Office & Theater, Network Switch, Platinum Grey, 12 Port, AC1014

  • NETWORK INTERFACE MODULE: 12 port Cat 5e network interface module has high density mini patch panel..
  • SWITCH BETWEEN DATA AND VOICE APPLICATIONS: Easily switch an outlet from Voice to Data or from Data to Voice with this Cat 5e Network Interface Module..
  • CAT5e SPECIFICATION: It meets Cat5e specifications and RJ45 ports are labeled 1 thru 12..
  • AVAILABLE SIZE: The network module has two different size – 6 port, 12 port..
  • AVAILABLE STYLE: It has two different specification – Cat 5e, Cat 6.
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Honeywell YTH5320R1000 Wireless Focuspro Thermostat Kit, Non-Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • Module receives communication from the wireless devices.
  • Maintains 62 F for heating and 82 F for cooling.
  • THERMOSTAT: Same great features of the FocusPRO thermostat - now wireless..
Check Stock

Honeywell YTH6320R1001 Redlink Wireless Focuspro Thermostat Kit, 2 Packs

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

  • This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
  • Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
  • For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
  • A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
  • Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..
Check Stock

Honeywell YTH6320R1001 Wireless Focuspro Thermostat Kit, Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

Honeywell YTL9160AR1000 E-Connect Wireless Programmable/Non-Programmable Line Volt Thermostat Kit

  • Equipment Interface Module (Eim): All Hvac Equipment Is Wired To The Module. Module Receives Communication From The Wireless Devices.
  • Return Air Sensor: Works With The Equipment Interface Module To Maintain Safe Indoor Temperatures If Power Is Lost At The Wireless Thermostat. Maintains 62 F For Heating And 82 F For Cooling.
  • Red Link Wireless Technology: Powered By Red Link Reliability. No Interference With Other Wireless Devices In The Home.
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

DollaTek SIM900A V4.0 Wireless Extension Module GSM GPRS Board with Antenna Kit

  • Onboard two sets of power interface VCC5 5V power supply, VCC4 interface, 4.8-5.2V power supply, optional power supply self-start (default) and control start..
  • Onboard SMA (default) and IPXmini antenna interface, SIM900A interface retains reset..
  • The size of the module is 49 * 50mm, all new and original equipment..
  • The computer can power the early computer debugging USB module, and there is a very large amount of data under the recommended current of more than 1A..
  • You can set up dozens of MA data in standby to provide 10MA low power sleep and sleep..
Check Stock