Reviews Lubrication Pumps

Power Service Clear Diesel - 6/80oz. Bottles

  • De-ices frozen fuel-filters and reliquaries gelled fuel.
  • Removes water from fuel system - extends life of fuel-filters, fuel-injection pumps and fuel injectors.
  • Contains Slick diesel Lubricator for maximum fuel lubrication that protects pumps and injectors from accelerated wear.
  • Effective in all diesel fuels, including Ultra Low Sulfur Diesel (ULSD) and biodiesel blends containing up to 20 percent biodiesel (B20).
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

Power Service 8025-6PK Diesel 9-1-1 Fuel Anti-Freezer - 32 oz., (Pack of 6)

  • Reliquifies gelled fuel and prevents fuel-filter icing.
  • Removes water from fuel system, extends life of fuel-filters, fuel-injection pumps and fuel injectors.
  • Contains Slickdiesel lubricator for maximum fuel lubrication.
  • protects pumps and injectors from accelerated wear.
  • Effective in all diesel fuels, including Ultra Low Sulfur Diesel (ULSD) and biodiesel blends containing up to 20 percent biodiesel.
Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Garlock 29602-4110 Guardian Goulds 3196LTX Bearing Isolator, Bi-Directional, 1.875\ x 2.750\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4107 ISO-Gard Goulds 3196MTX Bearing Isolator, Bi-Directional, 1.750\ x 2.875\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29507-4106 ISO-Gard Goulds 3196STX Bearing Isolator, Bi-Directional, 0.875\ x 1.250\ x 0.625\ Outboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29602-4124 Guardian Bearing Isolator, Durco Mark 3/Group 2, Bi-Directional, 1.875\ x 2.625\ x 0.700\ Inboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29699-0319 Guardian Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4125 ISO-Gard Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

2 Wheel Drive

  • EXTEND THE LIFE OF YOUR VEHICLE: zMAX Heavy Duty Application is simple and easy to use. Micro-lubrication soaks into metal surfaces which improves lubricity and reduces carbon deposit build-up while boosting performance and protecting vital vehicle parts..
  • ENGINE EFFICIENCY: Helps to restore the combustion valve and piston ring sealing resulting in a smoother running motor and more power. Helps to reduce engine wear and lower emissions on large engines, trucks, marine vessels and construction equipment.
  • FUEL CONDITIONER: Provides continuous lubrication on moving parts. It conditions the pumps and nozzles reducing carbon residue from the valves and pistons. Improving fuel efficiency and performance for large gas or diesel vehicles and engines..
  • TRUSTED BY PROFESSIONALS & DEALERSHIPS: Stock zMAX Micro-lubricant to treat your machinery like a professional. From local repair shop mechanics to major dealership groups, our multi-use eco-friendly formula is industry tested and mechanic trusted..
  • TRUSTED QUALITY AND PERFORMANCE - zMAX is proud to be the Official Micro-lubricant of Spee....
Check Stock

VP Racing Fuels 2837 Diesel Fuel Conditioner Case (144 fl. Oz)

  • 24oz. Treats up to 240 gallons (908 liters).
  • Increases cetane and replaces lost lubrication.
  • Reduces smoking while increasing fuel mileage.
Check Stock