Reviews Low temperature Hydraulic Oil

uxcell Silicone O-Ring, 33mm O.D, 27mm I.D, 3mm Width, Seal Rings Gasket, White, Pack of 20

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
Check Stock

Finish Line High Performance Mineral Oil Brake Fluid 4 oz

  • Specifically engineered for use in bicycle hydraulic disc brakes.
  • Provides maximum fluid life and braking performance, even at low temperatures.
  • Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of....
  • Specifically engineered for use in bicycle hydraulic disc brake systems.
Check Stock

Duragard Arctic Blue Hydraulic Fluid - 2.5 Gallon Jug

  • Designed for operation in extreme cold temperatures.
  • Smoother operation — Excellent frictional control assures quiet and efficient action of hydraulic systems while reducing cavitaion and wear even under severe operating conditions of low or high temperature and high load..
  • Reduced downtime — Year-round protection against ear, rust, corrosion, sludge, and foaming..
  • Long oil life — High dielectric strength* for use in electric service bucket trucks..
  • Extreme Low Temperature — Excellent low temperature properties for use in arctic conditions..
Check Stock

Boss Snowplow Hydraulic Fluid Oil 1 Gallon HYD01836

  • Designed for operation in extreme cold temperatures..
  • Smoother operation — Excellent frictional control assures quiet and efficient action of hydraulic systems while reducing cavitaion and wear even under severe operating conditions of low or high temperature and high load..
  • Reduced downtime — Year-round protection against ear, rust, corrosion, sludge, and foaming..
  • Long oil life — High dielectric strength* for use in electric service bucket trucks..
  • Extreme low temperature — Excellent low temperature properties for use in arctic conditions..
Check Stock

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock

Kubota Genuine OEM 1 Gallon Super UDT2 Trans-Hydraulic Fluid One Gallon 70000-40201

  • Shell Rotella Heavy Duty Tractor Fluid is a premium quality fluid for use in transmissions, hydraulic systems, oil immersed brakes and other ancillary systems fitted to agricultural tractors and off-road equipment.
  • It is an exceptional universal tractor fluid specially formulated for use where a common fluid reservoir serves transmissions, final drives and hydraulic systems.
  • Incorporates a friction modifier for proper noise-free operation of wet-brakes.
  • Excellent low temperature fluidity provides good response at low temperatures.
  • Shell Rotella Heavy Duty Tractor Fluid provides excellent service in virtually all makes of construction and farm tractors.
Check Stock

Hydraulic Welded Bottle Jack 50T(110,231lbs) Capacity for Auto Repair and House Lift, Red

  • ... 【SUFFICIENT LIFTIING HEIGHT】In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses..
  • 【HIGH/LOW-TEMPERATURE RESISTANCE】The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F..
  • 【COMPACT AND PORTABLE】Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, the bottle jack has a handle that makes it easy to move and carry to any location. .
  • 【HIGH SAFETY】The bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-limiting device prevents over-pumping and gives you safety assurance. The bottle jack uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage..
Check Stock

Jiggler Shaker Siphon Hose Pump 6' x 5/8\ Anti-Static Tubing Brass Tip

  • It's the ideal jack for use on hydraulic cranes, engine hoists, and a wide variety of applications for mechanics, truckers, farmers, and off-road enthusiasts.
  • Mounts directly onto shop cranes and features a slow-release function while providing a long 24in.-44in. lift range.
  • High-quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend the service life.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  • Hydraulics are powered with high-quality oil, which offers better corrosion resistance and high/low-temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F.
Check Stock

XtremepowerUS 8 Ton Capacity Long Hydraulic Ram Jack Engine Lift Hoist Manual Cherry Picker w/Handle

  • It's the ideal jack for use on hydraulic cranes, engine hoists, and a wide variety of applications for mechanics, truckers, farmers and off-road enthusiasts.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
  • Mounts directly onto shop cranes and features a slow release function while providing a long 24in.-44in. lift range.
  • Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
Check Stock

Stark 8-Ton Double Cherry Picker Pump Long Hydraulic Ram Jack Engine Lift Hoist Manual w/Handle

  • It's the ideal jack for use on hydraulic cranes, engine hoists, and a wide variety of applications for mechanics, truckers, farmers and off-road enthusiasts.
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life.
  • Mounts directly onto shop cranes and features a slow release function while providing a long 24in.-44in. lift range.
  • Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F.
  • Constructed of high-grade steel and built to exacting standards for quality and durability.
Check Stock

LUCAS OIL 10827 Brake Fluid12 ounce

  • Specifically engineered for use in bicycle hydraulic disc brakes..
  • Provides maximum fluid life and braking performance, even at low temperatures..
  • Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures..
Check Stock

Maxim A3107 Hydraulic Reservoir Tank - 7-Gallon Hydraulic Fluid Tank - Heavy Duty Hydraulic Tank - 12 Gauge Steel Hydraulic Reservoir with Temp Gauge - ¾” Mag Plugs, 40 lb, 12l x 12w x 12h, 202270

  • SPECS: Maxim’s reservoir tank with 7-gallon capacity and 12 gauge steel body has .75-inch mag plugs and is fitted with oil level gauges cum temperature indicators, filler breathers/basket strainers with suction and return ports on both sides..
  • IDEAL SIZE: Our hydraulic oil reservoir is a 7-gallon steel tank that is neither too large nor too small. It effectively dissipates heat while allowing trapped air bubbles to escape and slowing the velocity of returning hydraulic fluid..
  • PROTECTIVE: This hydraulic steel tank reservoir is fitted with a chrome filler breather and basket strainer. The tank allows enough breathing space for hydraulic fluid while filtering contaminants from downstream components..
  • MULTIPURPOSE: Fitted with oil level gauges cum temperature indicators, our hydraulic oil reservoir tank is a multitasking expert that can be used as a mounting surface for other hydraulic components. It's versatile and useful..
  • DURABLE: With a 12 gauge steel body powder coated black, this 7-gallon hydraulic tank reservoir can withstand surface corrosion from severe environmental factors. It can be used to store hydraulic fluids in accumulators, pumps, motors, etc..
Check Stock

Power Up HydraMaxx Hydraulic Fluid Additive 1 Quart Bottle

  • Viscosity Index Improvers: Enhanced VII maintain lubricant flow and improve shear stability of the oil, especially at extreme temperatures..
  • Water Demulsifiers: Improves fluid ability to separate from water, virtually eliminating hydraulic issues related to water..
  • Pour Point Depressants: Reduce the pour point and improve flow at low temperatures..
  • Detergents and Dispersants: Enhances the fluid's ability to clean and disperse contaminants..
  • Extreme Pressure/Anti-Wear additives: Polarized AW, Friction Modifier and EP components provide unequaled protection for pumps, pistons, and sleeves. Fluid strength in increased allowing for significant friction reduction and protection of vital hydraulic components. Polarized film protects pumps during start up conditions..
Check Stock