Reviews Low power Enclosure

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt

  • Features of RG212CA v2: Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket.
  • High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs.
  • Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level.
  • 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuat....
Check Stock

JBL GT-12BP - 12” car audio Bandpass Subwoofer Box, Black

  • Deep, powerful bass with enhanced efficiency and higher output of a bandpass with vented enclosure and power handling of 150W RMS or 450W Peak.
  • 12" (300mm) bandpass subwoofer enclosure.
  • Slot vent designed which enables the subwoofer to deliver ultra-low bass at higher sound pressure levels than a sealed enclosure.
  • Injection-molded Polypropylene Woofer Cone.
Check Stock

Pyramid BNPS122 12 inch 1200 Watt Car Bandpass Subwoofer and Sub Enclosure Box and Planet Audio AC1500.1M 1500 Watt Audio Amplifier with Wiring Kit

  • PACKAGE INCLUDES: 1 Pyramid 1200 watt loaded subwoofer enclosure and 2 12 inch subwoofers and 1 1500 watt Planet Audio monoblock amplifier and 1 8 gauge wiring installation kit.
  • SUBWOOFERS/ ENCLOSURE: The 12 inch dual car audio subwoofers with a bandpass enclosure features a MAX power handling of 1200 watts at 4 ohm. The subwoofers also include a built-in neon ascent lighting that is specially treated with a black rubber edge suspension and bandpass alignment for extra deep bass.
  • DESIGN: The enclosure has a front window made out of plexi glass and the subwoofers have a silver polypropylene cone with 4 tuned ports.
  • AMPLIFIER: The Planet Audio amplifier can handle 1500 watts of MAX power. It features a continuously variable low pass crossover, low level inputs and outputs, power and protection LEDs, heavy duty set screw style terminals, chrome plated connections, and an illuminated logo.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
Check Stock

Rockville RVS12A 12' Slim Vented Powered Car Subwoofer Enclosure, 1400 Watts

  • Rockville RVS12A Slim 12″ 1400 Watt Amplified Car Subwoofer in Vented Enclosure with Shallow Enclosure..
  • 1400 Watts Peak power output. 350 Watts RMS. 12″ Subwoofer with 50 Oz magnet. Subsonic filter preset to 30Hz. Vented enclosure plays tight and deep bass compared with the sealed version of this. The enclosure is a little bit bigger than the sealed version we make but this is still shallow and the sound of this is significantly better and this is still really small. MDF Enclosure (high quality NOT particle board!). 2 High Temperature Voice Coils..
  • Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement.. 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround. High Power Strontium Magnet with Ultra Saturated High BL Motor Structure. Vented Core Magnet Motor Structure. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max. Aviation Grade Black Tweet Carpet with Embroidered Logo. Black Texture Synthetic Leather Front Panel. Impedance: 4-ohms. Frequency response: 30Hz-500Hz. SPL @ 1w/1m: 89dB..
  • Dimensions: 26.49″ Length x 15.2″ Height 6.8″ Top Depth x 8.9″ Bottom depth. Unit Weight: 32.55 Lbs..
  • Amp Features: Built-in 300 Watts RMS / 1200 Watt Mono Block Amplifier. 150mV – 5V Variable Input Level. 12dB....
Check Stock

Waterproof WiFi Indoor Outdoor Weatherproof Enclosure Cabinet Box

  • Waterproof WiFi Indoor Outdoor Weatherproof Nema Enclosure Cabinet.
  • A low cost solution for the protection of equipment from theft and damage.
  • This rugged enclosure is ideal size for securing wireless access points, WiFi routers and bridges.
  • Large removable WiFi label to help hide or identify WiFi capability in public areasDescriptionGray NEMA Type 3R / IP42 rated weather proof ABS enclosure. - Inside Dimension 10.5 x 9.5 x 4 inches. - Raised lid with continuous gasket. - Lockable Latch (Padlockable) - Heavy duty hook-and-loop Velcro tape for mounting equipment in enclosure - 4 Mounting stand-offs - 3 Gasketed mounting holes - Easy to install enclosure mounting hardware included - Removable 120 VAC power module - 3 Rubber cable ports.
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

Rockford Fosgate P3-1X12 Punch Single 12 Ported Loaded Enclosure Subwoofer

  • The P3-1X12 is a single P3 12” DVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound....
  • The P3-1X12 vented loaded enclosure is Internally wired to create a 1-Ohm amplifier load with power handling of 600 Watts RMS / 1200 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding....
  • The P3-1X12 loaded enclosure measures at 15.125" x 19.125" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockville Wheel of BASS 8' Slim Under-Seat Powered Truck/Car Audio Subwoofer Sub

  • Rockville WHEEL OF BASS 8" 500w Slim Under-Seat or Trunk Mounted Powered Car Subwoofer..
  • Enclosure is very shallow at only 3.15” tall so it can fit anywhere. You can fit it under seat but it also sounds great and takes up little space in your trunk..
  • Enclosure is made out of solid cast aluminum. Peak Power Handling: 500 Watts. RMS Power Handling: 125 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply..
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit.
  • Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 180Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz.
Check Stock

Rockford Fosgate Punch P1-2X12 Dual P1 12 Loaded Subwoofer Enclosure Ported

  • The P1-2X12 is a dual P1 12” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound....
  • The P1-2X12 vented loaded enclosure is Internally wired to create a 2-Ohm amplifier load with power handling of 500 Watts RMS / 1000 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding....
  • The P1-2X12 loaded enclosure measures at 15.125" x 33.875" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockford Fosgate Punch P1-1X12 Single P1 12 Loaded Subwoofer Enclosure Ported

  • The P1-1X12 is a single P1 12” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound....
  • The P1-1X12 vented loaded enclosure is Internally wired to create a 4-Ohm amplifier load with power handling of 250 Watts RMS / 500 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding....
  • The P1-1X12 loaded enclosure measures at 15.125" x 19.125" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockford Fosgate P3-2X12 Punch Dual P3 12 Loaded Enclosure Ported Subwoofer

  • The P3-2X12 is a dual P3 12” DVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound....
  • The P3-2X12 vented loaded enclosure is Internally wired to create a 1-Ohm amplifier load with power handling of 1200 Watts RMS / 2400 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding....
  • The P3-2X12 loaded enclosure measures at 15.125" x 33.875" x 15.75" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock