Reviews Low friction Wheels

6 Inch Caster Wheels Heavy Duty - 6" X 2" Industrial Casters - 2 Fixed and 2 Swivel Caster Wheels with Brakes - Cast Iron Plate Casters Set of 4 Heavy Duty - 3500 lb Capacity - Foghorn Construction

  • Moves Smoothly - Our premium 6” x 2” polyurethane wheels are low-friction, rolling smoothly along most surfaces. With 2 fixed and 2 swivel wheels, you’ll enjoy full maneuverability and control..
  • Heavy Capacity - A 3500 pound capacity ensures that your heavy duty wheels can handle just about anything you attach them to. Our plate casters can be welded or bolted to any piece of equipment..
  • Commercial Grade - Our casters are built to withstand constant use in industrial and commercial settings. Poly tread, fully-sealed bearings, and zinc-treated cast iron is long-lasting, even outdoors..
  • Non-Damaging - Our extra wide 2" polyurethane caster wheels are non-marking, low-friction, and scratch resistant. This industrial set can be used on cement, concrete, hardwood, wood or ceramic tiles..
  • Effortless Braking - The foot-activated brakes on the swivel wheels lock or unlock with the press of your foot, making it easy to keep your equipment in place. Two brakes give you even more control..
Check Stock

2 Scooter Wheels With Abec 7 Bearings for RAZOR SCOOTER 100mm (blue)

  • High-performance, high-rebound scooter wheels which fit on most scooters and measure 100mm in diameter (standard 24mm width). These replacement wheels will have your scooter riding like its brand new!.
  • These wheels utilize a specialized outdoor urethane formula (88A Durometer) for longevity and durability while providing a smooth and comfortable ride.
  • The Rounded Profile and Super High Rebound Urethane creates less friction allowing for faster speeds and better control.
  • Making a great bearing starts with having a lot of expertise, and using the best materials. Bullseye uses super hard Chrome Steel balls that measure 65 on the Rockwell Scale.
  • each ball is tested to ensure that is perfectly round. The balls run in deep-grove race ways, and are retained by a self-lubricating Delrin crown. A low viscosity synthetic oil has been added to make these bearings spin great, while keeping friction levels at a minimum.
  • Includes 2 wheels with Abec 7 bearings installed. These are easy to replace on any scooter!.
Check Stock

2 Scooter Wheels With Abec 7 Bearings for RAZOR SCOOTER 100mm (red)

  • High-performance, high-rebound scooter wheels which fit on most scooters and measure 100mm in diameter (standard 24mm width). These replacement wheels will have your scooter riding like its brand new!.
  • These wheels utilize a specialized outdoor urethane formula (88A Durometer) for longevity and durability while providing a smooth and comfortable ride.
  • The Rounded Profile and Super High Rebound Urethane creates less friction allowing for faster speeds and better control.
  • Making a great bearing starts with having a lot of expertise, and using the best materials. Bullseye uses super hard Chrome Steel balls that measure 65 on the Rockwell Scale.
  • each ball is tested to ensure that is perfectly round. The balls run in deep-grove race ways, and are retained by a self-lubricating Delrin crown. A low viscosity synthetic oil has been added to make these bearings spin great, while keeping friction levels at a minimum.
  • Includes 2 wheels with Abec 7 bearings installed. These are easy to replace on any scooter!.
Check Stock

Can Am K101 Outside Corner Roller Head Only – for Rolling Square Bead On Outside Corners

  • Delivers smooth rolling, even pressure on square corner bead.
  • a simple, easy solution to properly embed 90 degree bead on outside corners.
  • Easy to maintain tool designed to make rolling square bead simple to control.
  • low friction PVC wheels glide freely on corner bead providing long tool life.
  • Affordable Outside Corner Roller makes a great part of a complete Tool Kit, works with industry-standard Handles fitted with a 3/8” NPT insert (Handle not included with K101).
  • Made in Canada with powder-coated steel frame, low friction PVC wheels, and standard handle mount for compatibility with both fixed length or extendable Handles.
  • Unlimited Lifetime Performance Policy – every CanAm Tool is promised to be free of manufacturing defects and errors in workmanship – product support is just a phone call away!.
Check Stock

2 Wheel Diameter | Black Nylon Swivel Hooded Samson Twin Wheel Caster | 7/16 x 1-3/8 Friction Ring Stem | Installed mounting height 2-5/16 | 4 Pack

  • HOODED TWIN WHEEL CASTER (4 PACK) | Your order includes 4 hooded twin-wheel casters made of black Nylon 6 and Zinc-Plated Steel. Wheel Diameter: 2'' | Installed/Mounting Height: 2-5/16''. | 360° swivel (1-3/4'' radius)..
  • 7/16'' x 1-3/8'' FRICTION RING STEM | Ensure this is the correct stem for your project. This specialty friction ring stem measures 7/16'' in diameter and is 1-3/8'' long. Friction ring stems are inserted into posts or legs with matching-sized holes and are held in place by an expanding spring at the end of the stem. Visit the Outwater Store for more size/stem options..
  • GUSSET-REINFORCED | Lab tested to have a static rating of 75lb/wheel. Equiped with steel axle technology that is superior to any other wheel on the market and ensures longevity and strength. The 16 gussets (8 on each side) inside the wheel lend to the caster's further rigidity..
  • NON-MARRING WHEELS | Wheels are comprised of Nylon 6, which, unlike rubber, will not leave unsightly black track marks and are suitable for a variety of floor types. Twin Wheel series casters are commonly used with small displays, chairs, furniture, rolling racks and more..
  • EASY INSTALLATION AND QUIET ROLLING ACTION | Effortlessly install into place without the need for professional installation o....
Check Stock

2 Wheel Diameter | Black Nylon Swivel Hooded Samson Twin Wheel Caster with Brake | 7/16 x 1-3/8 Friction Ring Stem | Installed mounting height 2-5/16 | 4 Pack

  • HOODED TWIN WHEEL CASTER (4 PACK) | Your order includes 4 hooded twin-wheel casters made of black Nylon 6 and Zinc-Plated Steel. Wheel Diameter: 2'' | Installed/Mounting Height: 2-5/16''. | Locking/With Brake | 360° swivel (2-1/8'' radius)..
  • 7/16'' x 1-3/8'' FRICTION RING STEM | Ensure this is the correct stem for your project. This specialty friction ring stem measures 7/16'' in diameter and is 1-3/8'' long. Friction ring stems are inserted into posts or legs with matching-sized holes and are held in place by an expanding spring at the end of the stem. Visit the Outwater Store for more size/stem options..
  • GUSSET-REINFORCED | Lab tested to have a static rating of 75lb/wheel. Equiped with steel axle technology that is superior to any other wheel on the market and ensures longevity and strength. The 16 gussets (8 on each side) inside the wheel lend to the caster's further rigidity..
  • NON-MARRING WHEELS | Wheels are comprised of Nylon 6, which, unlike rubber, will not leave unsightly black track marks and are suitable for a variety of floor types. Twin Wheel series casters are commonly used with small displays, chairs, furniture, rolling racks and more..
  • EASY INSTALLATION AND QUIET ROLLING ACTION | Effortlessly install into place without the need for profes....
Check Stock

2-3/8 Wheel Diameter | Black Nylon Swivel Hooded Hercules Twin Wheel Caster | 7/16 x 1-3/8 Friction Ring Stem | Swivel Radius of 2-3/16 | by Outwater

  • HOODED TWIN WHEEL CASTER (SINGLE) | Your order includes 1 hooded twin-wheel caster made of black Nylon 6 and Zinc-Plated Steel. Wheel Diameter: 2-3/8'' | Installed/Mounting Height: 2-11/16'' | 360° swivel (2-3/16'' radius)..
  • 7/16'' x 1-3/8'' FRICTION RING STEM | Ensure this is the correct stem for your project. This specialty friction ring stem measures 7/16'' in diameter and is 1-3/8'' long. Friction ring stems are inserted into posts or legs with matching-sized holes and are held in place by an expanding spring at the end of the stem. Visit the Outwater Store for more size/stem options..
  • GUSSET-REINFORCED | Lab tested to have a static rating of 100lb/wheel and a dynamic rating of 88lb/wheel. Equiped with steel axle technology that is superior to any other wheel on the market and ensures longevity and strength. The 16 gussets (8 on each side) inside the wheel lend to the caster's further rigidity..
  • NON-MARRING WHEELS | Wheels are comprised of Nylon 6, which, unlike rubber, will not leave unsightly black track marks and are suitable for a variety of floor types. Twin Wheel series casters are commonly used with small displays, chairs, furniture, rolling racks and more..
  • EASY INSTALLATION AND QUIET ROLLING ACTION | Effortlessly install into place without ....
Check Stock

2-3/8 Wheel Diameter | Black Nylon Swivel Hooded Hercules Twin Wheel Caster | 3/8 x 1 Friction Ring Stem | Swivel Radius of 2-3/16 | 4 Pack by Outwater

  • HOODED TWIN WHEEL CASTER (4 PACK) | Your order includes 4 hooded twin-wheel casters made of black Nylon 6 and Zinc-Plated Steel. Wheel Diameter: 2-3/8'' | Installed/Mounting Height: 2-11/16'' | 360° swivel (2-3/16'' radius)..
  • 3/8'' x 1'' FRICTION RING STEM | Ensure this is the correct stem for your project. This specialty friction ring stem measures 3/8'' in diameter and is 1'' long. Friction ring stems are inserted into posts or legs with matching-sized holes and are held in place by an expanding spring at the end of the stem. Visit the Outwater Store for more size/stem options..
  • GUSSET-REINFORCED | Lab tested to have a static rating of 100lb/wheel and a dynamic rating of 88lb/wheel. Equiped with steel axle technology that is superior to any other wheel on the market and ensures longevity and strength. The 16 gussets (8 on each side) inside the wheel lend to the caster's further rigidity..
  • NON-MARRING WHEELS | Wheels are comprised of Nylon 6, which, unlike rubber, will not leave unsightly black track marks and are suitable for a variety of floor types. Twin Wheel series casters are commonly used with small displays, chairs, furniture, rolling racks and more..
  • EASY INSTALLATION AND QUIET ROLLING ACTION | Effortlessly install into place without the need ....
Check Stock

2-3/8 Wheel Diameter | Black Nylon Swivel Hooded Hercules Twin Wheel Caster with Brake | 3/8 x 7/8 Friction Ring Stem | Swivel Radius of 2-7/8 | 4 Pack by Outwater

  • HOODED TWIN WHEEL CASTER (4 PACK) | Your order includes 4 hooded twin-wheel casters made of black Nylon 6 and Zinc-Plated Steel. Wheel Diameter: 2-3/8'' | Installed/Mounting Height: 2-11/16'' | Locking/With Brake | 360° swivel (2-7/8'' radius)..
  • 7/16'' x 7/8'' FRICTION RING STEM | Ensure this is the correct stem for your project. This specialty friction ring stem measures 7/16'' in diameter and is 7/8'' long. Friction ring stems are inserted into posts or legs with matching-sized holes and are held in place by an expanding spring at the end of the stem. Visit the Outwater Store for more size/stem options..
  • GUSSET-REINFORCED | Lab tested to have a static rating of 100lb/wheel and a dynamic rating of 88lb/wheel. Equiped with steel axle technology that is superior to any other wheel on the market and ensures longevity and strength. The 16 gussets (8 on each side) inside the wheel lend to the caster's further rigidity..
  • NON-MARRING WHEELS | Wheels are comprised of Nylon 6, which, unlike rubber, will not leave unsightly black track marks and are suitable for a variety of floor types. Twin Wheel series casters are commonly used with small displays, chairs, furniture, rolling racks and more..
  • EASY INSTALLATION AND QUIET ROLLING ACTION | Effortlessly install in....
Check Stock

Wooden Wheels Natural Beech Wood Police Cruiser by Imagination Generation , Blue

  • Wooden Wheels begin as blocks of beech wood and are cut and crafted into one of 8 chunky vehicles.
  • Each vehicle features tons of tiny painted details as well as articluated doors and hatches.
  • Each piece of wood is securely fastened and stands up to tough play!.
  • Low-friction metal axles keep these wooden wheels rolling and rolling.
  • These chunky vehicles are perfect for little hands 12 months and up.
Check Stock

Dual Handle Hand Truck (1)

  • RUGGED CONSTRUCTION: Avoid physical strains and injuries with our sturdy hand truck dolly. It has a load capacity of 500 pounds, so you'll be able to move furniture, gardening supplies, large boxes, and heavy objects..
  • LIGHTWEIGHT: Fabricated from durable industrial-grade aluminum, this dolly for moving is rust and corrosion-resistant. It's easy to lift, weighing only 20 pounds, and its high-tech wheels help reduce friction and support the load..
  • GET AROUND OBSTACLES: Comes equipped with rubberized comfort handles and low-friction skid bars allowing you to easily and safely pull the hand truck over stairs and curbs. It has 8" wheels and measures 54" H x 18.5" W with a 17.5 x 9" nose plate..
  • MULTIFUNCTIONAL: Ideal for commercial product distribution and delivery. Use our moving dolly for beverage delivery, corporate offices, food service, hospitals, malls, manufacturing, package delivery, or any heavy maneuvering..
  • HAULPRO: We are a family-owned and operated company that offers high-quality hand trucks, dollies, and commercial material handling equipment. We provide impeccable customer service and always strive to meet the highest standards..
Check Stock

Pro Skateboard Bearings 608rs Black ABEC 11 with Spacers and Washers for Skateboards, Longboards, Cruisers, Inline Skates, Roller Skates

  • High Speed Precision Bearings - Made of high quality smooth cruises for ultra smooth and long lasting performance. These bearings meet interational ABEC 11 standard, high speed and low friction..
  • Titanium Coated ABEC 11 Bearings - Made of high grade chrome steel with titanium coated for heat and friction reducing. These longboard bearings also have double-sided rubber shields for easy cleaning..
  • Set of 8 - Come with 8 skateboard bearings, 4 aluminum bearing spacers, and 8 stainless steel bearing washers. Fit perfectly with most of the wheels on the market. And all 8 set of bearings are pre-lubricated for smooth and fast riding..
  • Widely Applications - Perfect for roller skate bearings and longboard bearings, also fits skateboard wheels, mini cruisers, scooters, inline skates, trikes, fidget spinners, etc. Also can be used on tools or instruments such as 3D printer wheel bearings, CNC, EMAX, etc..
  • QSHFTO Customer Service - We provide friendly customer service and 100% satisfaction guarantee for you, if you have any question about our skateboard bearing, please let us know. View our store for more color combinations, pick your color for skateboard wheels and become an eye-catcher both ourdoors and indoors..
Check Stock

BSA Speed Wheels Lightly Lathed by Pinewood Pro for use on pine derby cars (set of 4)

  • Lathed in 5 different areas - precision tuned, fast wheels makes your car fast.
  • Lighter wheels means your car starts and rolls faster than the competition.
  • Lathed treads inside and out - wheels are trued so they turn smooth with less friction so they are faster than stock wheels.
  • Lightly Lathed BSA wheels from Official car kit to comply with BSA rules.
  • Coned and squared hubs - reduces friction on car body.
Check Stock