Reviews Low end Mount

Airuida Brushed Nickel Wall Mount Kitchen Faucet 4 Inch(10cm) Spout Reach Adjustable Center Brushed Nickel Mounted Installation Kit for Wall Mount Faucets Connector

  • [Material]: Refined brass material construction, advance Brushed Nickel finish resist corrosion and tarnishing, anti-rust..
  • [Function]: Double handle wall mount kitchen sink faucet can easy control cold and hot water.The spout can rotate 360 degrees..
  • [Design]:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Install]:Connect the longer end to the back of wall mount faucet,the shorter end to water line,against washes at the back of Stainless Steel sink by lock nuts to secure faucet. Fit better for various faucets.Designed for simple installation. Allows installation of wall mount.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

Kleine Wolke Angled Wall Mount Sloped Walls and Matching Spring Rod - .98in / 25mm Diameter (White, Stall Width/29.5-49.2 in/75-125 cm)

  • Low Cost Solution for Installing Shower Rod on Sloped Wall.
  • All Mounting Hardware Provided Easy Installation - Screw Wall Mount into Wall.
  • Install Tension Rod Can Be Painted to Match Your Decor.
  • Non corrosive aluminum tension spring rod with a chrome or white finish and is .98in / 25mm in diameter with white hard rubber end caps.
  • Simply pullout to desired length and clamp into position,NO twisting necessary.
  • No hardware needed for the rod,If over extended you can reload tension by pulling it completely apart and sliding the NON spring end of the smaller diameter piece into the larger diameter piece.
  • Shortening possible by sawing off to a length of 20 cm..
  • One angled wall mount and one matching rod are included.
Check Stock

Airuida Matte Black Wall Mount Kitchen Faucet 9 Inch Spout Reach 3 Inch to 9 Inch Hot and Cold Water Mixer Tap Adjustable Center Double Cross Handles 360 Rotatable Faucet

  • [Material]: Refined brass material construction, advance matte black finish resist corrosion and tarnishing, anti-rust..
  • [Function]: Double handle wall mount kitchen sink faucet can easy control cold and hot water.The spout can rotate 360 degrees..
  • [Design]:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Install]:Connect the longer end to the back of wall mount faucet,the shorter end to water line,against washes at the back of Stainless Steel sink by lock nuts to secure faucet. Fit better for various faucets.Designed for simple installation. Allows installation of wall mount.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

Airuida Chrome Polish Wall Mount Kitchen Sink Faucet 6 Inch(15cm) Spout Reach 8 Inch Center Chrome Polish Mounted Installation Kit for Wall Mount Faucets Connector Set

  • [Material]: Refined brass material construction, advance Chrome Polish finish resist corrosion and tarnishing, anti-rust..
  • [Function]: The commercial faucet can easy control cold and hot water.The spout can rotate 360 degrees.
  • [Design]:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Install]:Connect the longer end to the back of wall mount faucet,the shorter end to water line,against washes at the back of Stainless Steel sink by lock nuts to secure faucet. Fit better for various faucets.Designed for simple installation. Allows installation of wall mount.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

Neumann U 87 Ai Set Z | Multi Pattern Condenser Microphone Set

  • Large diaphragm cardioid microphone Pressure gradient transducer with with one-diaphragm capsule Transformerless circuitry Extremely low noise: 7 dB-A Includes swivel mount Straightforward handling for homerecording and professional studios High-quality professional equipment for limited budgets Shockmount sold separately.
  • Available in satin nickel and matte black.
  • Delivery includes an SG 103 swivel mount and a wooden jeweler's box.
  • A standard name in high-end recording studios around the world, Neumann mics deliver the professional touch that's needed to capture high-quality audio.
  • The TLM 103 is fast becoming a standard for home recording and the music industry.
Check Stock

(2) Mackie MR524 5 Powered Studio Monitors+10\ Active Sub+Mic+Mount+Stands+Pads

  • ... MRS10 10 120 Watt Powered Active Studio Subwoofer Sub + Footswitch. (1) RockvilIe RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height. (1) Pair of RockvilIe RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles. (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Features:.
  • Mackie MR524 5 50 Watt Powered Active Studio Monitor Class A/B Bi-Amped Speaker. Designed for superior mix translation and accuracy for professional results in any studio. Equipped with Mackies proven logarithmic waveguide design. Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot. Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum. 1 silk dome tweeter provides fast transient response for detailed high end and vocal clarity.
  • 5 polypropylene woofer delivers responsive, dynamic low frequency response. 50 watts of bi-amplified Class A/B amplification. Frequency response: 45 Hz 20 kHz. Optimize MR monitors for your mixing environment. Adjustable acoustic space filters maintain flat response in typical placement configurations. HF filter applies boost or cut to compensate for particularly dull or bright sounding rooms. Professional all-wood cabinet design buil....
Check Stock

Adams Neumann Football Tackified Gloves, Football Equipment and Accessories, White, 2X-Large

  • Large diaphragm cardioid microphone Pressure gradient transducer with with one-diaphragm capsule Transformerless circuitry Extremely low noise: 7 dB-A Includes swivel mount Straightforward handling for homerecording and professional studios High-quality professional equipment for limited budgets Shockmount sold separately.
  • Available in satin nickel and matte black.
  • Delivery includes an SG 103 swivel mount and a wooden jeweler's box.
  • A standard name in high-end recording studios around the world, Neumann mics deliver the professional touch that's needed to capture high-quality audio.
  • The TLM 103 is fast becoming a standard for home recording and the music industry.
Check Stock

3M Scotch 9415PC Removable Repositionable Tape (Double-Sided): 1/2 in. x 72 yds. (Translucent)

  • ...ings. It’s a double-sided translucent polyester film that’s coated with a removable and repositionable low tack adhesive on its liner side and a high tack, permanent adhesive on the exposed side..
  • Double-coated 3M 9415PC tape is effective on various materials or substrates. It can be used to temporarily mount lightweight items such as paper, film, plastic or foam. With most paper stock, it won’t cause delamination. The flexible material surpasses rigid materials such as cardboard in adhering to low tack adhesive. It offers fair resistance to solvents, medium temperature resistance and good UV resistance..
  • Industries that can benefit from using 3M 9415PC removable tape include direct mail marketing, paper and print, electronics, medical labeling and commercial printing..
  • Product applications include mounting, attaching, adhering, affixing, holding and temporary positioning of paper, photographic paper, foams, cardboards, and plastics. Mount notes on classroom walls, adhere posters to foam-core boards, install plastic sheets onto windows, reclose envelopes or bags, create removable labels and stickers, book inserts, and foam gasketing, core starting and end tabbing of papers, point of purchase displays, mount promotional items, change....
Check Stock

Picatinny Offset Rail Mounts Aluminum 45 Degree Adapter Combination for Flashlight Laser Sight Optics for Hunting (5 Slot Hollowed Out 45 Degree - 2 Pack)

  • These were easy to install. light and red dot sight fit perfect. . if you place a red dot on your 2000, use a bore sight to align the red dot up with the end of your barrel. You can easily use hard sights, then roll your 2000 just a tad to use the red dot. These offset rails were just the perfect height.
  • This product worked great for a low profile offset mount. I put it under my red dot so it would not hinder the use of the red dot or iron sights. you can mounted a small flashlight. Works as intended..
  • Super Lightweight Offset Side Rails with Great Low Profile Design! Allows the Attachment of Lasers, Flashlights, Red Dot Sights or Other Tactical Offset.
  • 45 degree offset mount can fit for 45 degree offset iron sights.
Check Stock

Pearl PBTM1516/C 15 x 10 Inches and 16 x 10 Inches Banda Timbales

  • 15"X10" & 16"X10" Extra deep shells for added low end.
  • Includes double braced Timbale stand with cowbell mount.
Check Stock

MXL Instrument Condenser Microphone XLR Connector Champagne MXL-990

  • FET based design with transformer balanced output for a variety of applications..
  • Vintage body style with champagne finish..
  • Includes custom shock mount, mic stand adapter & carrying case..
  • Provides silky sweet high end and retains tight, solid low and midrange reproduction.
  • Power requirements: Phantom power 48V (+- 4V).
Check Stock

Suunto Sk8 Wrist Compass

  • wrist, add-on-back and add-on-end versions.
  • Wrist mount design: use only when needed.
  • Tilt is 2 to 3 times better than conventional compasses.
  • Phosphorescent compass card for easy-reading in low light conditions.
Check Stock

12V Magnetic Towing Trailer Light Kit Amber/Red

  • Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
  • Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse.
  • Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
  • Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
  • Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack.
Check Stock