Reviews Low emittance Adhesive

Xbox One Ir Extender Blaster Cable (2 Head, 10 Foot)

  • Connects to the IR port on the back of the Xbox One.
  • Each emitter includes adhesive - find the best position, and lock it in!.
  • 10 foot cord allows flexibility in installation.
Check Stock

BXzhiri 5050 Led Strip - RGB LED Strip 300 LED Waterproof RGB Flexible Light Strip Kit Wifl LED Music 44 Key IR Remote Bluetooth Controller Strengthen Tape 12V 5APower for Room Bedroom,Party

  • [High Brightness & Low Energy Consumption] - Consist of 300 individual 5050 SMD LED emitters on this 5-meter dimmable strip lights, operating on....
  • [Multi-Color option & IR remote] - Consists of multiple color channels on this LED strips, not only can change the mode and speed, also there are 16....
  • [Easy installation & Strong adhesive] - double-sided sticky adhesive on the backside allows for quick and easy installation in a wide variety of....
  • [Waterproof & Safe] – Protect your strip lights from water with this waterproof feature. Extremely low heat by low-voltage power enables the lights....
  • [Widely used] – Perfectly used for decorating your bedroom, cabinet, kitchen, bar, TV, etc..
Check Stock

SZBJ IR Emitter Extender Cable Extension 3.2 Feet - Dual Head 3.5mm Infrared Red Transmitter Pure Copper Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 2 IR Emitter

  • Passes IR communication: Used with an IR Repeater kit or other electronics has emitter output to control a device.Adhesive backing allows the emitter....
  • 3.2 ft overall length of Infrared Emitter cable between the emitter heads and the mini-plug, extend remote control ability to any room any where in....
  • Control A/V component by the existing IR controller: such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD....
  • Easy to use : Sticks directly onto the AV equipment, and quad Heads allow you to control multiple pieces of equipment with only one IR output..
  • Plug into IR OUT port for use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers..
Check Stock

TNP IR Emitter Extender Extension Cable 10 Feet - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 1 IR Eye Emitter

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD....
Check Stock

Chanzon 10pcs TIP120 TO-220 NPN Darlington Transistor 5A

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
  • Collector-emitter saturation voltage - VCE (sat) = 2 V (maximum) at IC = 3 A.
  • Low collector-emitter saturation voltage.
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock

IR Emitter Extender Remote Control Transmitter 3.5mm to IR Extension Cable Triple Head Infrared Red Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (3 Head, 10FT)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
Check Stock

IR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
  • Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
  • Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
  • Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..
Check Stock

TiVo 2 Head IR Emitter / Blaster

  • Polarity: Anode (Longer Part) | Cathode (Shorter Part).
  • Package Content: 50pcs x Infrared Emitter Diode.
  • Low heat, energy saving, low power consumption, long service life..
  • NOTE: IR Emitter ONLY, IR Reciever is NOT included..
Check Stock

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

  • IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
  • Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Comes with adhesive backing sticks directly onto different devices.
  • Overall length of Infrared Emitter Extender: 10 feet (3 meter).
  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.
Check Stock

Bridgold 20pcs TIP127 PNP BJT Transistors Darlington Bipolar Power Transistor 5A -100v 3Pins

  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic construction with built-in base-emitter shunt resistors.
Check Stock

Bridgold 10pcs TIP102 102 Bipolar BJT Single NPN Darlington Transistor 100 V/8 A,3-Pin TO-220

  • High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
  • Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
  • Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
  • Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
  • We have undergone rigorous testing and stable performance.
Check Stock