Reviews Low Wattage Tubes

Equal Rights, Equal Lefts [Explicit]

  • Powerful DuroMax Engine: the XP12000EH is powered by a DuroMax, 457cc OHV engine..With Gasoline : Peak Wattage - 12,000., Running Wattage - 9,500., Running Amperage at 120V - 79.17., Running Amperage at 240V - 39.58., Runtime at 25% Load - 19., Runtime at 50% Load - 8With Propane : Peak Wattage - 11,400., Running Wattage - 9,025., Running Amperage at 120V - 75.21., Running Amperage at 240V - 37.6., Runtime at 25% Load - 14., Runtime at 50% Load - 7Please read the detailed safety instructions in the manual before operating..
  • Dual fuel technology: the ability to run on propane or gasoline allows the freedom and flexibility of fuel choice. Protects your investment by automatically shutting the generator off when it senses that the oil is low.
  • Plenty of power: with 12,000 starting watts and 9, 500 running watts, This unit can handle heavy loads from lights and a refrigerator to a home air conditioner and high amperage power tools..
  • Maximum power: with DuroMax MX2 technology, get the maximum power from each of the 120 volt receptacle. Choose between operating the generator at both 120 V and 240 V Simultaneously, or at 120 only with full power..
  • Powering everyone anywhere: like all DuroMax generators, the XP12000EH is EPA and CARB approved For use in all ....
Check Stock

STX International Turboforce 3000 Heavy Duty 5-In-1 Powerful Size #12 Electric Meat Grinder • 3 Lb High Capacity Meat Tray • Sausage Stuffer (3 Sizes) • Kubbe Maker • Burger/Slider Maker • Meat Claws

  • Features a Locked Motor Wattage of 3000 Watts of Peak Output Power, 3 speeds (High, Low, Reverse) and a Circuit Breaker for Safety.
  • Size No.12 Grinder, Not a Size No.5 or No.8 Like Smaller Grinders, 2-1/2 -Inch Diameter Output for Ground Meat and 2-Inch Diameter Feed Tube.
  • Includes 3 Tempered Steel Grinding Plates (Fine, Medium, Coarse), 3 Stainless Steel Cutting Blades, 3 Piece Set of Sausage Tubes and Kubbe Attachment.
  • Over 80,000 STX Grinders Have Been Sold Nationwide in the Last Seven Years While Maintaining an Incredible 99.8% Customer Approval Rate. All STX Products Include a 1 year - 100% - Fix or Replace Guarantee, Parts and Labor Included.
  • Dimensions of Unit - Set Up - 19.0 Inches Front to Back by 8.0 Inches Wide by 14.0 Inches High. This Meat Grinder is intended to Grind Meat - This Grinder Will NOT Grind Bones.
Check Stock

AIORNIY Space Heater Fan Heater,Personal Mini Space Heater Portable 350W Low Wattage Fireproof Heater for Office Home Tabletop Under Desk Floor Indoor Use

  • ➤【Easy to Use】Single On/Off switch on the back of office heater. For indoor personal use such as office desk table tent camping desktop..
  • ➤【Low Wattage】350W, 220V. Low wattage heater is more economical than running a higher wattage space heater and will not overload the circuit.....
  • ➤【Quiet & Fast Heating】Puts out a pretty decent amount of heat, suggest using it for space about 100sq.Ft. Use it by the desk, take the chill....
  • ➤【Bright & Compact】19x12x22cm Bright color makes it easy to see and it's nicely compact so you won't knock into it. This personal space heater....
  • ➤【Safe & Warranty】heater made of ABS fireproof material, will shut off automatically if you happen to tip it over, which is a nice safety....
Check Stock

12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock

ECG J-100 Electric Corded Medium Duty Soldering Gun, 140/100W

  • UL & C UL approved, dual heating element for soldering a variety of materials.
  • High wattage (140W) heats up to +950°F (+510°C).
  • Low wattage (100W) heats tip to +750°F (+399°C).
  • Country of Origin: TAIWAN, PROVINCE OF CHINA.
Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 50-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 30-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

  • Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
  • Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
  • UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
  • Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
  • Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
  • 100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..
Check Stock

10-Pack L Shape Connectors and 10-Pack Waterproof LED Strip Clip Connectors, JACKYLED 10mm Wide 4 Pin Unwired Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights

  • MAX WATTAGE: 72W max wattage, these 4 pin connectors can use low wattage and high wattage led light strip. Handy tool for a firmly stable connection,no need to solder..
  • FIREPROOF MATERIAL: The led connectors are not like some cheap thin plastic kind. They are made from PBT material, heat resistant, Anti-burning, No Fire Hazard..
  • APPLICATION: The L shape connectors fit all 10mm wide 4 pin 3528/5050 wide RGB LED strips. While the 4 pin led connectors only suitable for 10 mm wide waterproof 5050 led strips. Perfect for LED light DIY project..
  • EASY TO USE: No soldering required. Simply connect the 4 copper contacts on the back of the prepared LED strip with the 4 pins of the led connectors, and then close the connector clips firmly to connect..
  • PACKAGE: 10pcs l shape led connectors, 10pcs waterproof led strip connectors.
Check Stock

Logisys 480W ATX Power Supply

  • Guaranteed to fit  your model Acer Veriton listed below in the Product Description.
  • 1 x Main connector (20+4Pin) This works with both 20 pin and 24 pin main connectors!.
  • 1 x 12V P4 connector, 3 x 4-pin Molex Connector, 2 x SATA(Serial ATA) connector, 1 x Floppy connector.
  • 480 Watts - This is an upgrade with additional wattage for additional devices, this replaces lower wattage power supplies.
  • Special features: On/Power Switch, High Efficiency, Low Noise and Ripple Fan, Over Power protection, Short Circuit Protection, Over Voltage....
Check Stock

DC 12V 2A Power Supply Adapter, Mavel Star AC 100-240V to DC 12V Transformers Switching Power Outlet Converter 2.1mm X 5.5mm US Plug

  • Max Wattage Load: 24W, this means the total wattage of your device should not exceed the Max Wattage ( 24W) of this adapter.
  • Plug and Play: Very easy to use For the 12v Water pumps, Low voltage Led Strip, Led string lights, Wireless Router, ADSL Cats, HUB, Switches, Security Cameras, Audio/Video Power Supply.
  • Life time warranty: Worry-Free customer service,unconditionally refund or free replace if defective or any quality problems.
Check Stock

ADBQCSX 350W Space Heater Top Heat Plug in Heater Wall Outlet Electric Space Heater as Seen on TV Fast Heating Low Noise Safe Use Small Plug in Heaters for Indoor Use

  • Digital Thermostat: Unlike most space heaters, they just have options for low medium and high, but this gives you actual degrees. Ability to be....
  • Quiet & Fast Heating: Extremely quiet to heat up 100 square feet room well. It is for smaller places like offices or dorm rooms desk tables indoors.....
  • Low Wattage Heater: Push the button under the plug to adjust to a rotating degree. A low wattage heater is more economical than running a higher....
  • Multi Protectio: Wall plug room heater is made of flame retardant material avoiding fire hazards. The automatic safety shut-off system will shut the....
Check Stock

K&H PET PRODUCTS Thermo Lookout Pod Heated Cat Bed Classy Gray 22 Inches

  • HEATED CAT BED: Heated pet bed provides low wattage gentle warmth and ultimate comfort in a modern cat cave with a window to peek through, great for cats and small dogs.
  • CAT CAVE: Unique zip together bowl design surrounds your pet with comfort and privacy as they snooze.
  • ALL SEASON: Heated cat bed is low wattage and extremely energy efficient.
  • the thermostatically controlled 4 watt heater is removable for use in all seasons.
  • MACHINE WASH: Cushion is removable for easy wash and care.
  • SAFETY: K&H doesn't just use safety listed parts, we safety certify the entire product. This heated cat bed has been tested & certified by MET Labs and exceeds USA/CA electrical safety standards.
  • BRAND YOU TRUST: Designed by K&H with OVER 20 years of experience in creating safe, innovative, quality products for pets.
Check Stock

K&H PET PRODUCTS Thermo Lookout Pod Heated Cat Bed Classy Red 22 Inches

  • HEATED CAT BED: Heated pet bed provides low wattage gentle warmth and ultimate comfort in a modern cat cave with a window to peek through, great for cats and small dogs.
  • CAT CAVE: Unique zip together bowl design surrounds your pet with comfort and privacy as they snooze.
  • ALL SEASON: Heated cat bed is low wattage and extremely energy efficient.
  • the thermostatically controlled 4 watt heater is removable for use in all seasons.
  • MACHINE WASH: Cushion is removable for easy wash and care.
  • SAFETY: K&H doesn't just use safety listed parts, we safety certify the entire product. This heated cat bed has been tested & certified by MET Labs and exceeds USA/CA electrical safety standards.
  • BRAND YOU TRUST: Designed by K&H with OVER 20 years of experience in creating safe, innovative, quality products for pets.
Check Stock