Reviews Low Profile Servo Board

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

  • Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
  • Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
  • Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

  • MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
  • Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
  • Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
  • Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
  • Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check Stock

Thunder Tiger RC Rudder Servo Gear Set Innovator

  • ☆【QUALITY METAL GEAR】：Using high-quality hard alloy materials, equipped with metal gears, the RC gear servo kit has high precision and is not easy to jam.
  • ☆【HIGH-STRENGTH ALUMINUM FRAME】：Using high-quality all-aluminum frame, and after precision processing, the RC gear servo kit is strong and not easily deformed.
  • ☆【HIGH OPERATING EFFECIENCY】：The RC gear servo kit has high operating efficiency, low noise, low power consumption, and is easy to install and disassemble.
  • ☆【WITHSTAND HIGHER LOADS】：RC gear servo can withstand higher loads and ensure the normal operation of the server, effectively improving the performance of RC cars.
  • ☆【5 SIZE SERVO ARMS】：There are 5 different servo arms in the RC gear servo kit package, which can meet your different needs, suitable for 1/10 1/12 remote control car RC off-road vehicle.
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

AGFRC 36KG IP67 Waterproof Steering Servo High Torque Programmable Full Metal Gear Digital Brushless Servo with 25T Metal Servo Horn for 1/10 RC Models, Control Angle 180° (A80BHSW V2)

  • Programmable & High Torque - AGFRC A80BHSW high torque servo is programmable by the AGF-SPV2/3 servo programmer to change the torque, speed, angle, inversion, etc. The maximum torque of this steering servo for RC car is up to 36 kg/cm (500 oz/in) @8.4V and speed up to 0.071sec/60°@8.4V..
  • IP67 Waterproof Design - AGFRC RC steering servo motor uses high-precision production technology to improve product tightness. With IP67 waterproof design, when you cross the mountains and pass the charming stream, fully magnetic waterproof IP67 grade can let your model play with the river..
  • High Quality & Performance - Standard waterproof high torque servo equipped with full patent reinforced steel gear, full metal case, three ball bearings, and magnetic angular position Sensor which is low power consumption and can instantaneous angle sensing..
  • High Precision & Application - Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. This brushless full metal gear servo is with a standard size, dimension: 40*20*37.5mm, ideal for 1/10 buggy, monster truck, RC car, crawler, climbing car, boat, airplane, helicopter, robot, etc..
  • Satisfied Customer Service - Please read the detail description of this brushless high speed HV servo motor first, if any ideas ....
Check Stock

VGEBY RC Servo Full Metal Gear 9G All Metal Servo for WPL B1/B16/B24/B36/C1/C24/C34/JJRC Q60/Q61/Q65/MN 90/99 RC Car

  • 【Excellent performance】: RC servo not only has high efficiency, low noise, low power consumption, but also high sensitivity and responsiveness..
  • 【High precision:】 The high-quality servo torque is large and the response is fast and accurate. It can achieve the best control state when used with the RC model. Can provide you with different experiences and fun..
  • 【Design】: RC Mini Digital Servo is designed for 3D F3P aircraft. Perfect accessory for RC enthusiast..
  • 【Easy to install】: small size, easy to install and disassemble, is an excellent choice that can better upgrade the performance of your model toys.
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

Zoty 15x21x4mm Bearing 6702-2RS Rubber Sealed Hobby RC Vehicle Servo Bearings Pack of 10pcs

  • ABEC-3 Grade Hobby RC Vehicle Servo Bearings.
Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

  • ✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
  • 0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
  • ✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
  • ✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
  • ✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
  • Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
  • ✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.
Check Stock