Reviews Low Profile Screws

NDS Square Catch Basin Drain Grate, 9 in., Black Plastic

  • Protect your drainage system by blocking leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Use with the 9 in. square catch basin, riser, or low-profile adapter to drain excess stormwater from lawns, landscaped areas, under downspouts, patios, and walkways.
  • Fits 9 in. Catch Basin Drain, 9 in. Riser, and 9 in. Low-Profile Adapter . 121 GPM flow rate. 39.5 sq. in. open surface area. Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph.
  • drain grate fits on catch basins, risers, and low-profile adapters and can be secured with screws. 9 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit on 9 in. catch basins, risers, and low-profile adapters.
Check Stock

Jake Sales Brancd - #10 x 1-1/2 Low Profile Pancake Head ~250 Screws- Wood to Metal Roofing Screws for Standing Seam Roofs - Zinc Plated

  • Dimensions: Diameter .203" - Width .438" - Head Height .094" - Length 1.5" - Use T25 Torx/Star.
  • Ultra-thin flush finish pancake head fastener for Metal to Wood standing seam roofing applications.
  • Low profile pancake head fastener with sharp point tip, easily push through pre-drilled metal panels.
  • Screws have a zinc coating to prevent rusting and corrosion.
  • Low Profile, thin pancake head screws lay flush prevents screw head from dimpling panels.
Check Stock

NDS 1212 Square Catch Basin Drain Grate, 12 in, Green

  • Protect your drainage system by blocking leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from lawns, landscaped areas, under downspouts, patios, and walkways.
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in Low-Profile Adapter. 162 GPM flow rate. 53.1 sq. in. of open surface area. Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph.
  • cover fits on catch basins, risers, and low-profile adapters and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters.
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock

NDS 1215 Square Catch Basin Drain Grate, 12 in, Galvanized Steel

  • Rust- and corrosion-resistant galvanized steel grate protects your drainage system by blocking leaves and debris before they can enter and clog your pipeline. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from driveways, parking lots, and landscaped areas.
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in. Low-Profile Adapter. 348 GPM flow rate. 113.8 sq. in. of open surface area. Rated for NDS Class C (H-20) loads (up to 325 psi) when properly installed—recommended for heavy-duty pneumatic tire forklifts and tractor-trailers at speeds less than 20 mph.
  • fits on 12 in. catch basins, risers, and low-profile adapters, and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters.
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock

Warne M902/879M Two Piece Bases Weatherby Mark V Matte

  • Low profile design allows use of iron sights when optics are removed.
  • Full width and depth recoil slots provide maximum bearing surface for recoil key engagement.
  • Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque is recommended.
Check Stock

Prime Ave Stainless Steel License Plate Screws Compatible/Replacement for Buick Cadillac Chevrolet GMC (Pack of 8)

  • Includes (8) brand new stainless steel license plate screws- Lifetime Warranty to Never Rust!.
  • Premium quality 18-8 stainless steel for maximum performance & durability.
  • Low profile screws to enhance the look of your vehicle.
  • Truss head screws to secure your license plate without washers (screws are long enough & can be used with license plate frame).
  • Screws are self-tapping for perfect fitment for installing front & rear license plate.
Check Stock

3M SJ4575/BLK110 Scotch SJ4575 Dual Lock Low Profile Reclosable Fastener: 1" x 10 ft, Black

  • 3M Scotch SJ4575 Dual Lock Low Profile Reclosable Fasteners can replace conventional fasteners such as screws, clips, rivets, snaps, hook and loop and bolts in many applications where access or repositioning is needed..
  • Amazingly thin and reclosable, yet strong, 3M Dual Lock Low Profile fasteners are thinner and more flexible than other reclosable fasteners. SJ4575 is backed with 3M 300 LSE Laminating adhesive, giving it an excellent bond to many substrates including polypropylene, polyethylene, metal, finished wood and many others..
  • Used in POP (point of purchase), trade show exhibition and electronics, Dual Lock low profile reclosable fasteners attach ceiling tiles, carpet, seat cushions, trade show graphics, access panels, wall panels, and small electronic devices. They are also great for attaching E-ZPass tags to car windshields. 3M typically recommends 4 square inches of fastener per pound of static load for their low profile dual lock products..
  • unlike products where there are a separate hook and a loop side.
  • so rolls are typically cut in half and then mated or connected so a 10-foot roll would be used as two 5-foot strips. Low profile dual lock has about 700 stems per square inch, but the stems ar....
Check Stock

Monstrum Lockdown Series Picatinny/Weaver Scope Rings | 30 mm Diameter | Black | Medium Profile

  • Sturdy 30 mm diameter scope rings for use with standard 30 mm scope tubes.
  • Base is compatible with all Picatinny and Weaver mounting platforms.
  • Torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.
  • The rings are available in three heights - low profile (15mm of clearance), medium profile (18mm of clearance), and high profile (22mm of clearance).
  • All Monstrum Tactical Lockdown Series rings and mounts include a lifetime guarantee.
Check Stock

Jnrtifow Low Profile Picatinny Weaver Top Rail Scope Mount Base for Optics Scope Sight Adapter

  • Customizable fine level adjustment for perfect zero (up/down, left/right)..
  • Rear Sight Rail Mount 100mm Picatinny Weaver 20mm Scope Mount Base For Hunting Red Dot Optics..
  • Ultra light weight and low profile scope mount..
  • Feature: Fast and easy installation. Mount on standard 20mm weaver base -Constructed of Aluminum..
  • Specification：Hardcoat anodized 6061 aircraft aluminum. Recommended for use with low profile red dot.Integrated back-up rear sight. 3X M3 countersunk hex screws. 1X M3 round head screw..
Check Stock

UTG Super Slim RMR Mount 2 in 1 Combo Picatinny

  • Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize.
  • 0.87" Height Mount Positions RMR at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights.
  • Low Profile 0.40" Height Mount Positions RMR at a Low Enough Height for Most Shotguns and Rifles with Traditional Stocks Not in Line with the Bore.
  • Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero Hold on Any Picatinny Rail.
  • Includes RMR Mounting Screws and Installation Tools for a Simple and Friendly Installation.
Check Stock

20pcs M8 x 25mm 304 Stainless Steel Flat Head Torx Bolt Flat Head Cap Bolt Torx Socket Countersunk Screws.

  • Material：The flat head socket cap screws are make stainless steel 304 which offers a high level of chemical and corrosion resistance..
  • Package Included: 20 x Flat Head Socket Cap Screws..
  • Use：With a low-profile, countersunk head, flat socket head cap screws are ideal for applications requiring a strong fastener with a flush mount..
Check Stock

Amazing Drapery Hardware Wand Assembly Kits Repair for Broken Horizontal Blind Tilt Wand 5

  • Package: A set of Low Profile Brackets For Window Blinds(two brackets as a set,a Left bracket and a right one not include any screws).
  • The size of Windows Box Brackets is 1-1/2" Tall x2-1/4" Wide for 2" Low Profile blinds only..
  • White Color Bracket set Can mount to top, side, and back of window casing..
  • The Brackets made of Strong Steel Hinged Safety,Good for Inside or Outside mounted blinds.
  • Please kindly check the size on the picture and make sure it can match your device before order..
Check Stock

3M SJ4570/CLR1333 Scotch SJ4570 Dual Lock Low Profile Reclosable Fastener: 1" x 10 ft, Clear

  • 3M Scotch SJ4570 Dual Lock Low Profile Reclosable Fasteners can replace conventional fasteners such as screws, clips, rivets, snaps, hook and loop and bolts in many applications where access or repositioning is needed. Amazingly thin and reclosable, yet strong, 3M Dual Lock Low Profile fasteners are thinner and more flexible than other reclosable fasteners..
  • SJ4570 is backed with 3M 300 LSE Laminating adhesive, giving it an excellent bond to many substrates including polypropylene, polyethylene, metal, finished wood and many others. Used in POP (point of purchase), trade show exhibition and electronics, Dual Lock low profile reclosable fasteners attach ceiling tiles, carpet, seat cushions, trade show graphics, access panels, wall panels, and small electronic devices..
  • They are also great for attaching E-ZPass tags to car windshields. 3M typically recommends 4 square inches of fastener per pound of static load for their low profile dual lock products. The 10-foot sizes are cut from longer source rolls (only the 5/8 inch x 10-foot size of SJ4570 which is specifically labeled as *retail-packaged comes in a package suitable for resale)..
  • unlike products where there are a separate hook and a loop side.
Check Stock