Reviews Low Profile Air Floor Jack

SPECSTAR Under Hoist Support Stand 3/4 Ton 1500Lbs Capacity Jack Stand Lifting from 1.3 to 2 Meters with 12 Inch Diameter Steel Base

  • Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches..
  • A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety..
  • This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another..
  • The patented built-in by-pass device protects the hydraulic system from over-pumping damage. Before using the jack, insert provided handle into the handle sleeve, then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir.
  • This 2 Ton low-profile jack is ideal for auto repair services in your home garage. In addition, it is covered with a 1-Year warranty from the date of the purchase..
Check Stock

Jack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston

  • [Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle.
  • [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle.
  • [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle.
  • [Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

BILT Hard 3 ton Aluminum Racing Steel Floor Jack with 2 Jack Stands Low Profile Hydraulic Dual Piston Rapid Pump 6000 lb Capacity Blue

  • Includes Two Double Locking Jack Stands: It comes with 2 Packages. The heavy-duty jack stands safely support up to 6000 lb., They are constructed with....
  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a....
  • Low Profile: The aluminum racing floor jack has a 3-ton/6,000 lb. lifting capacity with a 3-7/8 in. to 19-1/2 in. lifting range, it provides you with....
  • Easy Operation: The 3 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into....
  • Rapid Pump: The high-performance low profile car jack has an exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It....
Check Stock

JEGS 80077-2 Replacement Saddle Pad For JEGS Professional Low-Profile 3-Ton Alum

  • For JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
  • Sold Individually The JEGS 80077-2 saddle pad is a replacement for the JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack 555-80077. To prevent slippage this pad is made from flexible rubber with a dimpled surface. Situated in the center of the saddle, this piece also provides a padded surface to protective bodywork and....
Check Stock

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • ...ndustrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position..
Check Stock

JEGS 80077K4 3-Ton Aluminum Floor Jack Kit Includes: Floor Jack Jack Stands Whee

  • (1) JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
Check Stock

Arcan 2 Ton Low Profile Quick Rise Steel Floor Jack A20015

  • LOW PROFILE FRAME: For easy access under low ground clearance vehicles..
  • DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load..
  • UNIVERSAL JOINT RELEASE MECHANISM: Provides precise control of jack..
Check Stock

Tomioka Racing Super Slopes - Low Profile Car Ramps Perfect for Lowered Cars, Raise Your Car Up for Floor Jacks

  • Compact design perfect for storing in your garage, both sit into each other.
  • Raises vehicle 3 inches off the ground to give access to floor jack points.
  • Perfect for lowered vehicles that are not tall enough to get a floor jack under.
  • Low Profile with a low slope incline that works well to save the front lip of your car.
  • Light Weight & Easy to Store giving you an easy tool to tuck away under your tool box.
Check Stock

Arcan 2 Ton Extra Long Reach Low Profile Steel Floor Jack A20016 / XL2T Black

  • LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack.
  • LOW PROFILE FRAME For easy access under low ground clearance vehicles.
  • DUAL PUMP PISTONS Quickly raises the floor jack saddle to load.
Check Stock

Jack Reacher

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity.
  • Constructed of durable, high-strength steel.
  • Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock

Jack Boss Car Jack Stands Low Profile 2 Ton 4,000 Lbs Capacity Steel Car Lifting Stand Adjustable Jack Stand for SUV MPV Sedans 1 Pair

  • [Measurement]Single Low Profile jack stand can be 2 ton(4000lb) capacity.Lifting range from min 10"to max 15".Weight:10lb.Please carefully check whether the lifting height of the car is suitable for our low profile style before placing an order, so as not to cause trouble to your vehicle.
  • [Durable Welded Frame]Car jack stand is constructed of durable mild steel and complete welded frame design for enough strong and smooth.Red jack stands are powder coated to prevent rust and the paint is evenly applied and glossy.
  • [Safety Top Surface]Top saddle has large concave shape contact surface area,providing the load perfect support.Heavy duty jack stands can relieve the pressure on the tires and get enough room and safety underneath the vehicle to do any repair for you.
  • [Adjustable Sawtooth Design]Multi-position ratchet bar with ductile iron is designed as sawtooth style for adjusting to the proper locking position fine and engage with the bar deep in its place and removal quickly.Floor jack stand equiped with hand self-locking to support the load solidly.Keep you safe well.
  • [Stable Base and After-sales ]Wide pyramid foot base of jack stand provides more strength and stability.Thick and sturdy but not overly heavy.Meets ANSI/ASME PASE safety standards and include....
Check Stock

ROAD DAWG ATZ830027HD Torin Hydraulic Low and High Profile Professional Grade Foldable Garage Service/Floor Jack with Quick Lift Pump, 3 Ton (6,600 lb) Capacity, Black

  • High and Low Profile Professional Floor Jack: Lifting range from 3.86" to 30.12" that is suitable for jacking up a light-duty car with low chassis as well as heavy-duty cars with a high chassis.
  • Fits most automotive sedans, SUVs, and offroad trucks due to its 3 Ton (6,600 lbs) lift capacity.
  • High Opeartion Performance with Dual Piston: Unique reinforced structural foldable arm gives more lifting choices.
  • Features thick u-channel frame side plates for stablilty and durablity as well as a sealed cast iron pump base that operates double pistons for faster rising action.
  • Brand New Racing Floor Jack Functions and Appearance Design: Rear casters pivot 360 degree for easy positioning and usage.
  • Overall streamlined design conforms to mechanics for best loading capacity.
  • Top Safety Level for Multiple Scene: 2 adjustible safety pins on lifting arm and extend bar on saddle.
  • Features a heavy duty two-piece grip that provides easy handling and is equipped with foam bumper to prevent damage to vehicle finish along with a safety overload system to prevent use beyond the rated capacity of 3 tons.
Check Stock