Reviews Low Pressure Coupling
1/8 NPT Female Brass Bulkhead Fitting Bulkhead Coupling,1.5 Length Tank Fitting
- 1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
- For use with LP and natural gas, refrigeration, and hydraulic applications.
- 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check StockPump Water Hose - Red PVC Drain Backwash Discharge Hose - Camlock Fittings 2\ x 100'
- Male Camlock Coupling - Aluminum 2 inch (O.D. - 2.480) - Type "E" Shank.
- Female Camlock Coupling - Aluminum 2 inch (I.D. - 2.519) - Type "C" Shank.
Check StockABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions
- TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
- NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
- Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
- Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
- FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
- Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
- Recommended for older low-pressure systems with mechanical fuel pumps.
- Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
- EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
Check StockNDS WU-1000-S PVC Pipe Fitting, 1-Inch Slip Union, Schedule 40, EPDM O-ring, White
- Great for high pressure applications: Use for any residential or commercial high-pressure water flow management needs.
- It is perfect for indoor plumbing, outdoor irrigation and sprinkler systems, and piping for an above ground pool, hot tub, or spa.
- Easy maintenance option: Unions are great to use when ease of service and maintenance for a pipe or ball valve is a priority.
- Easier to use than a coupling to connect pipes, elbows, and other fittings.
- Schedule 40 compliant: The WU-1000-S Slip Union can be used to create joints with schedule 40 pipe.
- NSF certified: Drinking water safe and low lead approved.
- Quality Construction: Made in the USA with quality polyone schedule 40 PVC ii material.
Check StockMTM Hydro Pressure Washer Extension Wand - 15 Degree Bent, 20\ Long Stainless Steel Lance - 4100 PSI High Pressure Accessories for Pressure Washing Guns and Foam Cannons
- CLEAN LIKE A PRO: These pressure washer extension wands use a light 15° degree bent angle and long 20" construction to allow you to reach low wheel wells, tops of walls, and gutters without strain. The universal quick connect fittings makes these perfect for any pressure washer guns, surface cleaners & water brooms..
- MADE TO LAST: MTM Hydro pressure washer spray accessories are a perfect replacement or addition to any pressure washer system. The ultra-durable lightweight construction and quick connect hookups give you commercial-grade performance in a more comfortable, more durable, easier-to-use package..
- SPECIFICATIONS: Our 20 inch long, 15° degree bend pressure washer gun extension wands are rated for 4100 PSI and a maximum of 10.5 gpm. It can handle high temperatures up to 300℉. The lances use stainless steel construction, a 1/4" plug inlet and a 1/4" coupling outlet..
- CUT THROUGH THE CRUD: Blast away dirt, grime, and caked on mess the easy way with professional grade-commercial power washing pressure. These lances are perfect for driveways, sidewalks, houses, auto detailing, cars, trucks, boats, RVs, and more.
- HEAVY-DUTY QUALITY, PROFESSIONAL ASSURANCE: MTM Hydro has been an industry leader in car detailing tools, pressure washing parts and acce....
Check StockKey Fire Hose 005-0247-0100 Key Fire Rack & Reel , White, 1-1/2\ ID, 100 feet, 500 PSI Burst Pressure, M x F NST Brass Connectors
- Polyester for resistance to abrasion and flex fatigue.
- EPDM reinforcement for resistance to weathering, ozone, UV, electricity, oils, water, steam and some solvents.
- Female NST for connecting to pipe and male NST coupling for connecting to nozzle.
- Brass connectors for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check StockCordless Pressure Washer, Max 870 PSI Portable Pressure Washer with 6-in-1 Adjustable Nozzle, Portable Power Cleaner with Battery & Charger , Washing Cars/Fences/Siding (15000Mah Battery ,5 Nozzles)
- 【Efficient pressure washer】 Arcwares cordless pressure washer generates up to 870 PSI and 2.2 GPM of water flow, with a 6-in-1 nozzle, 4 Quick-Connect nozzles(0°, 15°, 25°, 40°), and 300ml onboard detergent tank that are easily interchanged to simultaneously tackle different cleaning projects.
- 【Large capacity battery】 The 15000 Mah long-lasting battery will set you free from inconvenient electrical outlets. You can use battery pressure washer anywhere at any time and draw fresh water from a tap or any other source such as a bucket, pond, or even a lake and dip the end of the 20 ft hose(with filter basket can effectively and deeply filter impurities)in there to suck up the water.Please note that the garden hose quick release coupling is only equipped with a male quick release coupling..
- 【Carrying Case &Flashlights】 Arcwares portable pressure washer comes with a carrying case, which is good to store accessories in the box. Portable power washer also has a flashlight for night use or viewing corners that are difficult to clean. also include a collapsible bucket, charger, etc.
- 【Easy to operate】 Just charge up the battery and connect the electric pressure washer to a water source. It starts with the press of a button. This portable p....
Check StockHigh Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver
- 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
- 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
- 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
- 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
- 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock(2" Dia. x 50 ft) - HydroMaxx® White Flexible PVC Pipe, Hose, Tubing for Pools, Spas and Water Gardens
- Extra long design to accommodate extreme pipe connections. | Dimensions H 7.75" x W 2.38".
- The Fernco XL Coupling is 7.75" long, creating a stronger, and more durable coupling than any other on the market..
- For sewer and drain, waste and vent piping. Maximum test pressure: 4.3 PSI.
- Provides a positive seal for cast iron, plastic (PVC), lead, and steel drain connections. Made in the USA.
- Proudly Manufactured in Michigan for Over 50 Years!.
Check StockWalfront 12V 0.9A Water Pump Mini Self Priming Single Cylinder Piston Pump with 10 Meters Lift Portable Low Noise, Various Pumps And Accessories
- Great practicability: Piston pump can self-prime and can output relatively large pressure.
- Made of high quality electronic components, stable and reliable performance..
- Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
- Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
- Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
- Pump working mode: Single cylinder piston.
- Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).
Check StockGenova Products 30190 PVC Slip Coupling, 2-1/2"
- Ideal for cold water pressure applications.
- Used in irrigation, underground residential sprinkler system, water service pipe, deionized water lines, swimming pool installations and some chemical drainage systems.
- INSIDE MEASUREMENT – 2-1/2″ slip x 2-1/2″ slip.
Check StockAbbott Rubber PVC Discharge Hose Assembly, Blue, 2 in. Male X Female Cam and Groove, 65 psi Max Pressure, 50 ft. Length, 2 in. ID
- PVC for corrosion resistance, high strength, and light weight.
- High-tensile polyester yarn reinforcement for strength and durability.
- 2" aluminum male cam and groove coupling and 2" female cam coupling for resistance to corrosion and tarnishing.
- Lightweight hose coils flat for compact storage.
- Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi.
Check StockLegines Brass Compression Tube Fitting Comp Union Coupling Assortment Kit 1/8 3/16 1/4 5/16 3/8 & 1/2 6 Sizes 22 Pcs
- Kit contains 6sizes: 1/8"(2 pcs), 3/16"(10 pcs), 1/4"(4 pcs), 5/16"(2 pcs), 3/8"(2 pcs) and 1/2" (2 pcs)compression coupling, total 22pcs..
- Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems..
- This compression union assortments are designed for specialty and general repair shops..
- Meets specifications and standards of ASA, ASME asn SAE..
- Compression unions for joining copper, brass, or aluminum tubing in low-pressure applications.
Check Stock