Reviews Low Pressure Check Valve

EVIL ENERGY 1/2 12mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2

  • Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel....
  • Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high....
  • One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way.....
  • Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure....
  • The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar)....
Check Stock

EVIL ENERGY 1/2 Fuel Check Valve One Way Inline Non Return Diesel Gasoline Black 12mm OD,2PCS

  • Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring..
  • Size: 1/2inch (12mm) OD check valve can be work with 1/2 inch ID fuel hose..
  • Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉..
  • Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended).
  • Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems..
Check Stock

EVIL ENERGY 3/8" Fuel Check Valve One Way Inline Non Return Diesel Gasoline Silver(10mm OD,2PCS)

  • Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring..
  • Size: 3/8inch (10mm) OD check valve can be work with 3/8 inch ID fuel hose..
  • Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉..
  • Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended).
  • Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems..
Check Stock

Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Taprite T-742 Double Gauge Co2 Kegerator Regulator

  • Commercial Dual Gauge Primary Keg Beer Regulator.
  • CO2, 60# & 2000# Gauge, 5/16b Shutoff (W/Ck Valve) Plastic Bonnet for Easy Pressure Adjustment Ball Check Valve.
  • High Pressure Gauge (Side) Indicates Co2 Tank Pressure Remaining (0-2000 psi).
  • Low Pressure Gauge (Top) Indicates Output Pressure to Keg (0-60 psi).
Check Stock

Portable Scuba Tanks,2.3L Scuba Diving Gear,DOT Certified Tanks，Underwater 30-45 Minutes Diving Tank,Bacup Air Tanks

  • ★【2.3LDiving Tank Package】The D23-A incorporates improvements to the diving package, including bottle head first stage valves and pressure gauges, as well as pressure tubes,and added some configurations to enhance the diving experience.The total weight of D23-A diving package is 4.6kg. It can be carried directly for short distances, and can be transported in the car if traveling..
  • ★【Bottle top valve】: The main material of D23-A bottle top valve is brass chrome plating, using vacuum color plating process, to improve the anti-seawater corrosion performance, and more beautiful appearance. The bottle valve has a low pressure interface, which can be connected to BCD or life jacket for better applicability. The air inlet adopts high precision filter core, which can filter particles over 5 microns. The scuba tank is stamped with the DOT certification mark, you can always check..
  • ★【Pressure gauge and pressure tube】: D23-A scuba tank uses A more stable pressure tube, which is made of PVC and butadiol mixture material. It can bear A maximum pressure of 10MPa, and the internal pressure is only 0.8-1.2mpa in normal use. In order to make it easier to check the remaining air in the tank during the dive, we use an extended tube connection pressure g....
Check Stock

TAPRITE E-T742 CO2 Primary Beer Dual High Pressure Gauge New - CGA 320 Inlet 5/16' Barb Shutoff (Brass Body)

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Taprite T742HP Primary Double Gauge CO2 Regulator, Brass

  • Low pressure gauge (the top gauge) indicates output pressure to the keg.
  • The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi.
  • High pressure gauge (the side gauge) indicates CO2 tank pressure remaining.
  • Duck bill check valve helps prevent product back up into the regulator.
Check Stock

Galaxy's Edge Star Wars Legacy Lightsaber (26' Lightsaber Blade)

  • Pack of 2 premium inflatable swords. Luke / Yoda green single blade design..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape. *For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Cobbe Shower System 12 Inch Shower Faucets Sets Complete Bathroom Luxury Rain Shower Combo Set Wall Mounted Rainfall Shower Fixtures with Shower Valve and Trim Kit - Black

  • [Anti-Scald Pressure Balance Valve]: The advanced pressure balance ceramic valve of this shower system with cUPC certification can protect you from being scalded by sudden changes in hot or cold water pressure. Shower valve can be guaranteed free of charge. Please DO NOT disassemble the Valve Body..
  • [Preventing Water Hammer]：The shower valve also adopts Swiss premium NEOPERL Check Valve preventing water-hammer, runs quieter without knocking noise, also brings you and your family a luxury shower experience..
  • [High Pressure Rain Shower and Handheld]: Our Shower fixtures can reach a minimum water pressure of 2.2gpm. Air injection technology offers consistent powerful rain shower even under low water pressure. You can select 12" large square overhead shower and hand shower separately with ONE SWITCH..
  • [Premium Shower Faucets Sets Complete]: The elegant brushed nickel finished offers a sleek look , ensuring corrosion resistance and durable. Our shower system complements any décor. Designed to easily install with standard U.S. plumbing connections. NPT1/2''connector, compatible with most existing shower faucets..
  • [Easy Installation & 15 YEARS WARRANTY]: Any product quality problem can be guaranteed free of charge, especially the shower valve. Detailed instr....
Check Stock

Spears S1520-20 PVC Utility Swing Check Valve, 2-Inch, White

  • PVC white utility swing check valve is engineered for maximum flow, quick response and positive shutoff.
  • Offers a compact, high performance check valve for landscape and irrigation, pool and spa, aquaculture, OEM 1 and many general purpose applications.
  • Angled seat and weighted flapper for low-pressure seal.
  • Suitable for horizontal or vertical up-flow installations.
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock