Reviews Longitudinal Weld Steel Pipe

DIY Car Universal X-Slot Jack Pad Rubber Frame Rail Adapter Protector Pinch Weld Side Car Lifting Anti Slip Design Floor Support 10x4.7cm Trolley

  • Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance..
  • Jack pad is strong enough to support your lifting point and soft enough to prevent bending or fracture of clamping weld and frame longitudinal beam when jacking up your car..
  • Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle..
  • There is a slotted crossline on the top of the car jack pad, which can align with the side clip weld and protect the side, so as to prevent the frame longitudinal beam from bending when lifting the vehicle with the jack..
  • Maximum load: 3 tons, Diameter:10cm/3.93in.Thickness:4.7cm/1.85in..
Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz. 3-Pack

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..
Check Stock

J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..
Check Stock

FiberWeld Pipe Repair Cast 2x48 Inch – High Strength Adhesive Fiberglass Wrap – White

  • J-B Weld FiberWeld 1” Pipe Repair Cast: A high-strength one-time use fiberglass wrap, impregnated with a specially formulated anti-corrosive resin providing a permanent & protective adhesion to a wide variety of pipes. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. All you have to do is wet, apply and let it dry and in 15 minutes it hardens like steel!.
  • Cure and Set Time: Once the product is dipped in water for 5-7 seconds, you will have between 5-10 minutes to work with the product and then it will fully cure in 15 minutes!.
  • Product Features and Strength: J-B Weld FiberWeld 1” Pipe Repair Cast can withstand household water pressure and has a bend strength of 1800 PSI. Once the product is fully cured, it can be sanded and painted! The kit includes a pair of gloves, an epoxy putty stick and a securing bandage!.
  • Great For Repairs On: Copper, Cast Iron, PVC, ABS, Galvanized Steel, Rubber and more!.
Check Stock

Permatex - 80333 - Muffler & Tailpipe Putty 4 oz net wt 2 foil pouches

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains....
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It....
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam....
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,....
Check Stock

Garosa PVC Cutter Ratcheting Plastic Pipe Tubing Cutter PVC Pipe Cutter 2-1/2in 64mm Hose Cutting Scissors Heavy Duty Cutting Tool SK5 Steel Blade Aluminum Handle for PVC PP PU PE Pipe

  • USEFUL TOOL: Professional mechanics design, scientific design of aperture ratio, balance force, strong shear force, easy cutting, smooth and neat cut, improve work efficent..
  • RATCHET DESIGN: Self-locking ratchet design, tooth meshed and longitudinal feed, automatic locking does not rebound. Safe and secure. Our pvc pipe cutter maximum cutting diameter 64mm.
  • MATERIAL: SK5 material blade, high carbon content, high hardness, strong toughness, strong cutting, safe and not easy to break, not easy to rust, long life, high-quality blade steel.
  • PORTABLE: Ergonomic design, comfortable to hold and not tiring hands after working for a long time. The tail handle lock design, the lock locks the handle for easy carrying with work..
  • SUIT FOR: The pipe cutter is suitable for cutting PVC pipe, PP pipe, PU pipe, PE pipe. Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair..
Check Stock

CWI Gifts 18" Rustic Cotton Snowman Pick, Multi

  • Made of stainless steel, is not easy to bend, accuracy of reading.
  • Measurements read in standard on one side, and metric on the opposite side.
  • The scale is calibrated in fractional dimensions from 1/32 to 3/16 inch in 1/16 inch increment markings.
  • Welding Gage is designed for internal alignment and determining root weld spacing.
  • The gauge measures internal mismatch of pipe wall, scribe lines, weld fillet and crown height.
Check Stock

Exhaust Tip 2.25' Inlet 5.50 X 3.00' High 7.00' Double Wall Rolled Oval Resonated Stainless Steel

  • 2.25" Inlet 5.50 X 3.00" High 7.00" Double Wall Rolled Oval Resonated Stainless Steel.
  • Fits a 2.25 Exhaust Pipe 5.50 X 2.25 Inch Outlet.
  • Polished Stainless Steel (Please measure to make sure it fits your Car or Truck) Fits a 2.25 Exhaust Pipe.
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

Top Roof Rail Side Rack for Honda CRV CR-V 2012-2016 Assembly Luggage Carrier

  • Support Bracket Apply to disconnect-type longitudinal Roof Rack Bar of SUV MPV, Off-road.
  • Made of 304 Stainless Steel, 2 pieces, with soft plastic pipe, do no harm to your Roof rack bar..
  • Easy installation with quick release screws, within 30 seconds..
  • Apply to shovel bar diameter not over 50mm, Roof rack bar not over 50mm*40mm.
  • A brandnew idea, a better way of eye-catching lifestyle.
Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

  • 【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
  • 【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
  • 【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
  • 【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
  • 【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....
Check Stock

uxcell Round Weld Nuts, M10 x 14mm x 13mm Weld On Bung Female Nut Threaded - 201 Stainless Steel Insert Weldable 4pcs

  • 【HIGH QUALITY】-All the weld nuts are made of high quality carbon steel, have high hardness, perfect wear and rust resistance, smooth surface without burr..
  • 【ADVANTAGE】-Flat solder joints, high-quality steel ,good weld ability, thread size accuracy..
  • 【SIMPLE TO USE】-First, clean the welding surface, using sandpaper or steel brush to remove the joint oxide.
  • Second, welding a little bit and adjust the verticality of the thread.
  • 【MULTI APPLICATION】-Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
  • High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
  • 2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..
Check Stock