Reviews Long Anchor Bolt

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing....
Check Stock

PINGEUI 20 Pack M6 Open Cup Hook Expansion Screws Stainless Steel Ceiling Hook Bolts for Wall, Ceiling, Concrete, Brick

  • Made of 304 Stainless Steel, durable and sturdy, anti-corrosion, long service life.
  • Ideal concrete and masonry sleeve anchor , strong and heavy duty. Standard size M6 hex expansion bolt, easy to install.
  • Weatherproof , suitable for indoor or outdoor environment.
  • Package includes: 5 x Hex Expansion Bolt.
Check Stock

NAXEN 26kN Bolt Hanger Stainless Steel Climbing Hanger Climbing Anchor for 10 mm / 3/8 Bolt Pack of 6

  • Durable Hanger. With stainless steel and vibrated polished, the climbing anchor features corrosion resistant..
  • Sturdy Anchor. The bolt hanger is rated at 26kN, which offers a safe connection point for you..
  • Rounded Edges Design. The clever design offers anti-wear effect when clip carabiner or other gear on the bolt..
  • Large Open. The wide connection hole design facilitates carabiner or any other gears clipping..
  • Available Bolt Diameter: 10 mm / 3/8 in..
Check Stock

DANCO Brass Closet Bolts with Nuts and Washers Toilet Bolt Set, 1/4 inch x 2-1/4 inch, Brass, 12-Set (80156)

  • Universal Toilet Bolt Caps: Including 8 back toilet bolt caps, 8 covers and 8 washers. Perfect for worn-out toilet bolt covers, or conceal any unsightly, protruding or rusted toilet floor bolts..
  • Easy to Use: Our toilet bolt screw covers are easy to install with snap-on inserts, only need some simple household tools to complete the Installation, These decorative toilet bolt covers have a white palette to blend in with your toilet seat for a refined look..
  • Universal size: These toilet bolt caps are 1.4" high, 0.84" width, the hole is 0.52" * 0.32".
  • that fit a wide variety of toilet seat brands, can fit and cover different size toilets bolts..
  • Sturdy & Durable: Made of strong plastic, durable and reliable, easy cleaning and maintaining, can be used a long time..
  • Useful Design: The toilet anchor bolt cover is round with a decorative design. Don't worry about the toilet bolt cover falling off. This is an economical and effective solution to cover the sometimes rusty or dangerous toilet floor bolts..
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

5/16\ Expansion Shield Anchor Double Zinc Alloy Pk 25

  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
  • BOLT EXPANDS ANCHOR-No setting tool required.
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.
Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

#44 Blind Rivet Button Head 1/8 Diameter 3/16 - 1/4 Grip Range Plain Finish 304 18-8 Stainless Steel 100 pk

  • 【High Quality Stainless】Bolt Dropper Rivets are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater)..
  • 【Strong Holding, Top Quality】Thick shaft to ensure a secure hold and pop when tight. These rivets will anchor down and give you a long lasting connection that won’t corrode or pop out..
  • 【Great To Keep Around】Bolt Dropper rivets are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper rivets are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and long lasting!.
  • 【Dimensions】Diameter: 1/8" | Grip Range: 3/16" x 1/4" | Quantity: 100 pcs | Material: 18-8 Stainless Steel Corrosion resistant commercial grade by Bolt Dropper.
  • 【LIFETIME GUARANTEE】Our products are 100% stainless steel. We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

(100) Drop-in 1/4 x 1 Concrete Expansion Anchor 3/8 Drill Zinc Plated 1/4-20

  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
  • BOLT EXPANDS ANCHOR-No setting tool required.
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.
Check Stock