Reviews Lok On Tea

Guide Panels Compatible with MLOCK, 12 Pack in Black

  • Cable clips provide for clean placement of weapon light pressure switch cables on your M-LOK mounting platforms.
  • Loose and messy cables lock into place at your preferred position in the grooves along the side of the clip.
  • Cable clips are compatible with the M-LOK mounting platform and with all major flashlight pressure switch manufacturers.
  • Includes three M-LOK cable clips and all necessary M-LOK mounting hardware.
  • Available in 6061 grade aluminum or lightweight polymer material.
Check Stock

Montrum M-LOK Weapon Light Pressure Switch Cable Clips | Aluminum | Black

  • Cable clips provide for clean placement of weapon light pressure switch cables on your M-LOK mounting platforms.
  • Loose and messy cables lock into place at your preferred position in the grooves along the side of the clip.
  • Cable clips are compatible with the M-LOK mounting platform and with all major flashlight pressure switch manufacturers.
  • Includes three M-LOK cable clips and all necessary M-LOK mounting hardware.
  • Available in 6061 grade aluminum or lightweight polymer material.
Check Stock

Gotical 3 Slot M-LOK Picatinny Rail Section Three Slots for M-LOK Handguard M-LOK Rail with Set of Screws & Allen Wrench M-LOK Picatinny Accessory Rail (Pack of 4)

  • Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc..
  • M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
  • All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
  • INCLUDE - 2 Piece 3 Slot Rail And Screws.
Check Stock

Magpul M-LOK Polymer Picatinny Accessory Rail, 3 Slots

  • Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc..
  • Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
  • All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included..
  • 3 usable slots and a max overall length of 1.6"..
Check Stock

Dixon Valve BPM2 Brass Fitting, Plug, 1/4\ Push-On Hose ID Mender

  • Push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • Size: 1/2" NPTF male x 1/2" hose ID barbed.
Check Stock

Aecktech M-Lok Enhanced Picatinny Rail and Directional and M-LOK Standard QD kit Fits M-LOK Systems-14 Pieces

  • ✪ MGP CQB Enhanced Rail feature an aggressive anti-slip texture that attach anywhere on a M-LOK/Keymod Systems,and shield the operator from sharp rail edged hurt..
  • ✪ Directional Made from Carbon Fiber Reinforced Thermo Plastic,Allows for improved stability,comfort,and barrel control..
  • ✪ QD Swivel made from high-strength steel, M-LOK Standard Machined from High strength non-slip plastic,compatible With Any Standard M-LOK System.Fits 1.25 inch Webbing or Paracord Rigging or Weaving, Sports and Outdoors Applications( Only for M-Lok systems)..
  • ✪ DIY Collocation:The Enhanced Rail can diy collocation according to your preference,11 Enhanced Rail can be freely installed,the QD Swivel can match with the or the Picitanny Rail or more..
  • ✪ Package include:QD x 1,M-LOK Standard x 1,Enhanced Rail x 11,Locking Nuts and Wrench,Give you the perfect DIY collocation at the best price..
Check Stock

Monstrum F50 100 Lumens M-LOK Flashlight with Detachable Remote Pressure Switch

  • Lightweight tactical flashlight with a built-in M-LOK adaptor base designed for modular attachment to M-LOK equipped firearms.
  • 100 lumens LED bulb powerful enough for indoor and close range outdoor use.
  • Can be used with or without the included remote pressure switch.
  • M-LOK adaptor is compatible with the standard M-LOK mounting platform and comes with all necessary mounting hardware.
  • Attaches directly to your M-LOK mounting system with no extra adaptors or added bulk, providing a seamless and low profile addition to your rifle....
Check Stock

GUNPOW M-Lok Picatinny Rail, 5-Slot 7-Slot 13-Slot Lightweight M Lok Aluminum Picatinny Rail Section Accessories for M-LOK System with 6 T-Nuts & 6 Screws & 3 Allen Wrench, 3 Pack

  • ✪【Perfect Multi-slot M-LOK Rail Sections】GUNPOW 5-Slot 7-Slot 13-Slot M-LOK Rails Compatible With Any Standard M-LOK Handguard System, Available in Three Lengths For Your Choose, A Must Have M-lok Rail for Hunting Shooting! ☞ [Note: These Picatinny Rails &.
  • T-Nuts are Suitable for M-LOK Handguard Systems, Not for Keymod Systems]..
  • ✪【Fits On All Standard Picatinny Accessories】Picatinny Rails Allowing You Add On Any Standard 21mm Picatinny Accessories, Such As Sling Mount, Iron Sight, Red Green Dot Sights, Micro Dot, Scopes, Optics, Grips, Bipods, Flashlights, Lasers or Other Tactical Accessories..
  • Durable】Precision Machined Out of Premium 6061 Aircraft Aluminum Alloy &.
  • High Strength Steel In Black Matte Anodizing Finish, Offer Durable Safe Performance In The Field..
  • Solid-Style】Super Lightweight M-LOK Rails With Solid Aluminum Structure and Low Profile Design Reduces Bulk, 13-Slot Weight 1.83Oz, 7-Slot 0.78Oz, 5-Slot Only 0.66Oz, Without Adding Too Much Useless Weight and Bulk When Hunting..
  • ✪【Easy To Install】Install These Screws By Come With Allen Wrench Tool, Simple To Install or Remove. Pack Of 5-Slot, 7-Slot, 13-Slot Solid Rails, 6 Sets Matched Screw....
Check Stock

Gabasinover, Replacement parts NO. PA1100,Pole Saw Attachment fits for husqvarna 330LK,RedMax and Fits for LK Series gas and battery combi tools

  • Mmilwaukeee-49-16-2720 M18 FUEL QUIK-LOK 10 in. Pole Saw Attachment ....
  • Mmilwaukeee-49-16-2720 M18 FUEL QUIK-LOK 10 in. Pole Saw Attachment-49-16-2720-Mmilwaukeee-49-16-2720 M18 FUEL QUIK-LOK 10 in. Pole Saw Attachment-The Mmilwaukeee M18 FUEL QUIK-LOK 10 in. pole saw attachment is powered by the M18 FUEL power head with QUIK-LOK and is compatible with the QUIK-LOK attachment system. The unit has a 10 in. Ooregonn bar and chain which delivers Ssmoothh and fast cuts with minimal kickback. The pole saw attachment has an automatic oiler for proper chain lubrication,.
Check Stock

3 5 9 11 13 Slots M-L-ok Aluminum Picatinny Rail Sections, 5 Pack with 10 T-Nuts & 10 Screws & 1 Allen Wrench Accessories

  • Rails come with 3-slot, 5-slot, 9-slot, 11-slot, and 13-slot, 5pcs can meet your needs..
  • Picatinny rail-mounted accessory is designed for mounting on M-LOK hand-guards..
  • Multi-slot rail section for M-LOK is light in weight and firm as well as durable..
  • Using high-quality aluminum alloy after black precision processing..
  • All installation hardwares are included - 10 x M-Lok T-nuts, 10 x M-Lok screws, 1 Allen wrench.
Check Stock

Dixon Valve BPN23 Brass Push-On Hose Fitting, 3/8\ NPTF Male (Dryseal) x 1/4\ Hose ID Barbed

  • Push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 3/8-inches NPTF male and 1/4-inches hose ID barbed.
Check Stock

Dixon Valve BPN252 Brass Push-On Hose Fitting, 1/4\ NPTF Male (Dryseal) x 5/16\ Hose ID Barbed

  • Push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 1/4-inches NPTF male and 5/16-inches hose ID barbed.
Check Stock

Dixon Valve BPN42 Brass Push-On Hose Fitting, 1/4\ Male NPTF x 1/2\ Push-On Hose ID Barbed

  • Dixon push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 1/4-inches male NPTF and 1/2-inches hose ID barbed.
Check Stock