Reviews Locking Assemblies

iFixit Heavy-Duty Suction Cups - Electronics Computer & Tablet Display Opening Tools

  • HEAVY DUTY: Pair of 2.25 inch diameter (57 mm) locking suction cups for firmly securing the screen display on tech devices like tablets, desktop PC's,....
  • PRACTICAL: Specially formulated rubber foot holds stronger and longer. Heavy duty locking handles with latch..
  • ESSENTIAL: These suction cups are absolutely needed for reducing repair time..
  • SAFE DESIGN: Use these suction cups to safely lift and remove glass and display assemblies from devices. Intended for electronic device repairs only..
Check Stock

Whittet-Higgins CNM-08 Threaded Clampnut/Shaft & Bearing Locknut Collar, Metric M40 x 1.5 Right-Hand Thread, Self-Locking,

  • Slit locknut design with socket head cap screw provides single-point tangential locking.
  • Self-Locking. Prevents assemblies from loosening from large forces of vibration, shock and torque.
  • Easier and faster to install than traditional locknut & lockwasher.
  • Black oxide coating with wax finish to inhibit corrosion.
Check Stock

Carefree 961501WHT Fiesta White with Matching White Casting Universal Manual RV Awning Arms Set (68\-81\ floorline to awning rail)

  • Includes: 1-Front Arm assembly with upper and lower mounting brackets, 1-Rear Arm assembly with upper and lower mounting brackets, pull cane and fasteners.
  • Fit's Carefree Fiesta, Spirit FX and Simplicity Roller Assemblies 1997 to current.
  • Arm sets are not compatible with other awning brands.
  • No-Wand Remote Lock for easy no reach operation.
  • Self-Storing canopy Clamps keep your awning canopy tight.
  • Single Track Slider for smooth sliding action without binding.
  • Self Locking Handle, Integrated arm lock.
  • Carefree Fiesta arms are the time tested value leader for spring operated awnings.
  • Sturdy arms and more convenience features than any other arms on the market.
  • Carefree Fiesta Arm Set (Fits Fiesta Roller Assemblies).
  • Universal straight sides, arm height 68 inch to 81 inch awning rail to floor.
Check Stock

Permatex 27100 High Strength Threadlocker Red, 6 ml

  • Adds 3,000 PSI holding power on slip and press fit assemblies.
  • Well-suited for permanently locking studs and press fits.
  • Replaces set screws and snap rings and also locks against vibration loosening.
  • May require heat or special tools for removal.
  • Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts.
Check Stock

3 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2497 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding indus....
Check Stock

3 Foot – Directional High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2549 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2549 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, im....
Check Stock

2.5 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2497 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding indus....
Check Stock

1.5 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2497 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding indus....
Check Stock

1 Foot – Directional High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2549 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2549 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, im....
Check Stock

InSinkErator Wave Instant Hot and Cold Water Dispenser System - Faucet & Tank, Chrome, HC-Wave-C

  • 2 spring piston handle assemblies with auto-off hot and locking cold levers.
  • 9-1/4 in. overall height with 4-1/2 in. gooseneck spout projection.
  • 1/4 in. compression stainless steel flex lines and Santoprene hose outlet to tank.
  • Quick heating water tank (QHT) - REQUIRED! SOLD SEPARATELY.
Check Stock

MaxxHaul 80746 Tire Dolly, 300 lb. Capacity

  • This PATENT PENDING tire dolly is constructed from high impact, rugged injection molded polyethylene with ribbed reinforcement for strength and durability.
  • Can handle up to five tires and wheel assemblies or up to 8 tires. Moves 360 degrees for maximum manuevarability.
  • Two units can be connected together and work as a creeper or a dolly for moving other lightweight appliances, furniture, etc.
  • Features four 3 inch non-marring swivel castors. Storage located in middle of dolly with locking cover perfect for your small tire accessory parts.
  • Maximum load of 300 lbs. Overall dimensions: 25" diameter x 4-1/2" high.
Check Stock

0.5 Foot – High-Definition Audio Interconnect Cable Pair CUSTOM MADE By WORLDS BEST CABLES – using Mogami 2964 wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2964 wire and Eminence Gold Locking RCA Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you..
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D..
  • The brand of connector we used for this custom cable assembly: Eminence DWA-337 Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our custom made cables are professionally soldered with a Proprietary 4% Silver solder blend.
  • especially developed by WORLDS BEST CABLES, we also use a specially developed, Proprietary Ni....
Check Stock

Whittet-Higgins BM-06 Bearhug Threaded Shaft & Bearing Locknut, Metric M30 x 1.5 Right-Hand Thread, Self-Locking, Replaces Fuji FU06SC, FU06SS, Generic GUK30, GUK6, SKF KM 6, Standard KM 6,

  • Self-Locking. Prevents assemblies from loosening from large forces of vibration, shock and torque.
  • Easier and faster to install than traditional locknut & lockwasher.
  • Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment.
  • Balanced design for high speed applications..
Check Stock