Reviews Lock on Grips

FIFTY-FIFTY Double Lock-On Mountain Bike Grips, Bicycle Handlebar Locking Grips, Non-Slip MTB Handle Grips (Turquoise)

  • Comfortable and Durable: This mountain bike grips is made of soft and durable rubber. It can absorb shocks and make your hands feel comfortable even with or without gloves on a long ride..
  • Super Grip: The more textured non-slip surface pattern provides extra grip. The bike grips are also very slip resistant when riding in wet weather..
  • Dual Lock-on Design: the dual lock-on clamp ensures that the mtb grips are more secure and do not slip during the most intense rides..
  • Easy to Install – Installation is easy as long as you get your old bicycle grips off and securely locked into place..
  • Very Light: Only 98g per pair, the MTB handlebar grips fit for diameter 22.2 mm bike handlebars..
Check Stock

Rock BROS Mountain Bike Grips Handlebar Grip Bicycle Handlebar Grips Bike Handle Grips Double Aluminum Clamp Lock On Grips for MTB BMX Mountain Bike Handle Bar Ends Black Red

  • 【ERGONOMIC DESIGN】:Compared to the traditional bike handlebar grips, this grips expands the contact area of the hand, It can support from the index finger to the thumb, offering the best grip for natural state of riding. Reduce the pain in your wrist with the correct grip posture.
  • 【ANTI-SLIP&SHORK ABSORPTION】: The surface has anti-slip particles and lines that prevent vibration. The TPR rubber is very grippy. Not so soft that they feel squishy, not so hard that you’ll wonder if you even have grips. your hands no longer fall asleep on those long epic adventures through the trails.
  • 【Double Aluminum Clamp Bar Ends】: The grips hold onto the handlebars tightly by tightening down the collars on both ends. Aluminum lock ring can lock the handlebar firmly, don’t worry about moving.
  • 【EASY TO INSTALL】: This bike grips installation step takes only 3 steps. To begin installation of the handlebar grips, loosen the screws at the end with an allen key wrench included). The locks-ons make installing and removing the grips easy.
  • 【APPLICABILITY】Suitable for Bike Handlebars with Outer Diameter between 2.22cm bike handlebar grips for MTB, BMX, Mountain, Downhill, Folding Bikes..
Check Stock

Rock BROS Bike Grips Foam Single Lock on Bicycle Handle Bar Soft Comfortable Non-Slip Bike Handle Grips for BMX Mountain MTB Beach Cruiser Scooter

  • MATERIAL:Bike Grips are Made of high quality non-slip sponge for durability, with single aluminum alloy lock-on system.
  • STANDARD SIZE: The length of bicycle grips is 5.11inch , fits for the handle bar of more than 90% of bike with diameter of 0.87in(22.2mm), such as BMX, mountain, MTB, beach cruiser, scooter, folding, downhill, commuter bicycle etc..
  • HIGH-DENSITY SPONGE: thick sponge, non-slip, sweat-absorbent and shock-resistant, mountain bike grips giving you a comfortable riding experience.
  • COLOFUL DESIGN: bike handlebar grips has a variety of colors, you can choose according to your own preferences.
  • ROBUST STRUCTURE:Durable aluminum alloy strengthening clamp lock, keeping the grips tight without any worries of loosing or falling down..
Check Stock

Hapleby Premium Bike Handlebar Grips, Single Lock-on Bike Grips, Professional Mountain Bicycle Handlebar Locking Grips with Anti-Slip, 2PCS Screw and 2PCS Allen Wrench for Free

  • 1.WIDE COMPATIBILITY: The handlebar grips are 5.2inch length and 0.87inch diameter, suitable for all mountain bike and more than 90% of bike, such as BMX, scooter, folding, commuter bicycle etc. But this will not fit on a bike with GRIP shifters..
  • 2.PREMIUM MATERIAL: Handlebar grips body are made of high quality TPR green rubber, extra gel layer for soft touch and comfort with anti-slip design, relieves your fatigue and hand pressure for long rides..
  • 3.HIGH QUALITY LOCK RING: Single aluminum alloy lock-on system keep reduce weight, When you tighten the lengthened stainless steel screw, the thickened and widened lock ring design can improve the grip without any worries of loosing or falling down..
  • 4.EASY TO INSTALL: After inserting the handlebar grips directly, tighten the screw clockwise and put the end caps in, the installation is complete, the 2PCS allen wrench that came with it helps big time..
  • 5.PACKING INCLUDING: 1pair handlebar grips came with 2PCS screws and 2PCS end caps, provide extra free gift including 2PCS screw and 2PCS allen wrench..
Check Stock

Speeding Downhill on My Little Tikes Tricycle (feat. Obii-Trike) [Explicit]

  • Non-slip grip and double aluminum lock design: non-slip design on the surface keep your hand size the handle bar more stable and firmly, double aluminum alloy locking prevent handlebar grips from loose-off.
  • Good material: the handlebar and end caps are constructed with rubber, the double lock rings are made of aluminum durable and high quality, strong wear resistance, shock-resistance, give you good feeling of riding.
  • Good package: you will get 2 pair bicycle handlebar grips with 4 end caps and 8 aluminum lock rings in black and red , so you can install it on 2 bicycles or share it with your friends.
  • Size: 5.2 inch/ 13.2 cm in length, 0.88 inch/ 2.2 cm in inner diameter, 1.3 inch/ 3.3 cm in outer diameter.
  • Widely application: suitable for MTB BMX road mountain urban downhill fold bicycles, scooter cruiser tricycle, etc..
Check Stock

Crankbrothers Unisex Mallet Lace MTB Shoes, Black & Red, 13 US Men

  • Single Lock-On Clamp Design- Single clamp designed reduces weight and keep you feel comfortable even when your hand holds up the end of bike grips..
  • Very Comfortable and Durable – The mountain bike grips are made of soft and durable compound, different compound to increase palm cushion and finger grip, keep your hand feel comfortable and no pressure on a long ride even with or without gloves..
  • Super Grippy - Textured area offers more extra grip for your finger and palm, wider grooves provide tackier when rides in the wet weather..
  • Easy to Install - Installation is easy as long as you get your old bicycle grips off and securely locked into place..
  • Fits Most Mountain Bikes – The bicycle handlebar grips fit perfectly for Bike Handlebars with Outer Diameter between 20-23 mm outer diameter, the handlebar grips will fit standard mountain bike bar..
Check Stock

Oasser Motorcycle Disc Brake Lock 120dB Alarm Disc Lock, Stainless Steel Lock Large Capacity Battery Intelligent ON/Off Alarm Function for Motorcycle Bike Scooters(Gray)

  • A VERSATILE MOTORCYCLE LOCK - Our motorcycle handlebar lock works on all bikes with grips up to 1.5 inches(38mm) in diameter.Universally fits almost all Motorcycles,Scooters,Sports Bikes,Moped & ATV(a four wheeler).This Anti-Theft Motorcycle Grip Lock is designed to compatible with almost all brands of vehicle,like Yamaha, Kawasaki, Honda, Husqvarna, BMW, Suzuki, Triumph etc subject to Handlebar Grips 003c 1.5 Inches IN Diameter..
  • HIGH QUALITY DESIGNED WITH EXCELLENT LOCKING SYSTEM - This locking device for motorcycle is made of high quality light-weight CNC Aluminum.Time tested,this Grip Lock proven to be durable,anti-rain erosion,tamper-resistant and anti-theft..
  • A SMARTER ALTERNATIVE TO A WHEEL/DISC LOCK - Unlike disc locks,you won’t forget your motorcycle lock is still in place and avoid damaging the wheel and bike.No embarrassing falls,No bending,no disc dirt..
  • EASY TO USE AND SAVE TIME - Simply put the lock around the handlebar and then pulling to the front brake lever or clutch.Safely secure your ride from getting stolen in 5 seconds or less,takes less time than other motorcycle security device on the market..
  • SAVE-YOUR-MONEY MATTERS- Nothing is worse than getting your bike or quad stolen.Compared to an expensive new motorcycle, this is very wo....
Check Stock

Pnndee Universal ATV Alloy CNC Handle Throttle Grip Security Lock with 2 Keys,Motorcycle Lock – A Grip/Throttle/Brake/Handlebar Lock Moped (Black)

  • Superior performance Express Install:Take a few seconds to get the lock out and lock it in your motorcycles..
  • Safety and reliable: Time tested, proven anti-theft Grip Lock is tough, durable, and tamper-resistant making it extremely difficult for a thief to steal your vehicle..
  • Works on all two wheeler’s with grips up to 1.5inches(38mm) in diameter. Universal operation means that it fits all Motorcycles, Sports Bikes, Scooters, Mopeds & ATV’s (yes that’s a four wheeler). subject to Handlebar Grips < 1.5 inches (38mm) in diameter..
  • Material: Made of high quality CNC Aluminum. Water resistant, Heat Proof,Rust resistant beautiful and Durable.Lightweight Being the size of a cigar case and weighing only 0.88 lb you can easily carry.
  • Package Included:1 x Grip Lock with 2 x Keys..
Check Stock

Ergonomic Bike Grips - Single Lock-on Bike Handle Grip | Non-Slip Comfort Mountain Ergonomic Bike Grips for Mountain Bike, E-Bike, Hybrid, City Commuter Bikes

  • The ergonomic Mountain bike grips adopt Soft TPR rubber - Thick grips pattern (not rock hard) and big palm support to adapt perfectly for your hand to provide a better gripping when riding - Handle grips is snugly on bike handlebar to ensure riders safety..
  • The ergonomic bike handlebar grips come a pair with bright color - underside has great texture to increase contact surface area for hand placement and support the wrist when holding the grip - comfortable hand feeling for all lever cyclist to riding in different roads..
  • Adopt quality water-resistant and soft non-slip rubber that provides all-weather protection on the grips and the firm aluminium single locking bolts keep the grips tight without loose and slip (You can put much pressure on it and ride hard/Long).
  • The Ergonomic mtb single lock on bike grips with 130mm long for any standard straight handlebar bicycle with outer diameter of 20-23mm such mountainbike, BMX,hybrid bike, touring/city bikes etc.choose it will keeps hands from turning numb..
  • 1 minutes to install the bike handlebar grip - slide the grip onto the handlebar ....
Check Stock

BigPantha #1 Motorcycle Lock - A Grip/Throttle/Brake/Handlebar Lock to Secure Your Bike, Scooter, Moped or ATV in Under 5 Seconds! (Red). Bonus Grip Lock Holster for Easy Storage & Transporting

  • PLEASE READ - WORKS ON ALL TWO WHEELER'S WITH GRIPS UP TO 1.5 INCHES (38 mm) IN DIAMETER (Please check before purchasing). Universal operation means that it fits all Motorcycles, Sports Bikes, Scooters, Mopeds & ATV's (yes that's a three or four wheeler). Will accommodate all Brands of vehicle - Yamaha, Kawasaki, BMW, Ducati, Suzuki, Triumph etc subject to Handlebar Grips < 1.5 INCHES (38 mm) IN DIAMETER..
  • PREVENT YOUR MOTORCYCLE FROM GETTING STOLEN. Time tested, proven anti-theft Grip Lock is tough, durable, and tamper-resistant making it extremely difficult for a thief to steal your vehicle..
  • BONUS GRIP LOCK HOLSTER. Yet again - a BigPanatha first! Yes you could carry the lock in your pocket or in a shoulder bag / waist bag, but why bother when you can use the BigPantha custom designed Holster which IS NOW INCLUDED FREE OF CHARGE with the Grip Lock? Absolutely the best way for you to store and transport your grip lock. It looks great, it's comfortable, and it's very practical!.
  • SAVE TIME & HASSLE. In a rush? The lock is simple to use & fast to implement - you can remove the lock from your pocket and fit it in less than 5 seconds - that's faster than any other motorcycle security device on the market!.
  • SAVES YOU MONEY - CHEAPER THAN BUYING A NEW MOTORCY....
Check Stock

WOD&DONE Custom Hand Protection Athletic Tape Grips for Pullups, Functional Fitness, Gymnastics (Black, 20pk)

  • DURABLE DESIGN: Made with synthetic material, the handgrip technology on the Black Diamond No Hole Grips is perfect for your everyday weightlifting or gymnastics session. These grips are built to last. You not only protect your hands, but you get the comfort and grip you need to lock into the bar and lift fast and heavy..
  • SAVE TIME AT THE GYM: With these super sticky grips, you save time (and mess) during your workouts because you don’t need much chalk on your bars. On top of that, with no finger holes, you can easily transition between movements without spending time removing or adjusting your grips. You get a more efficient workout in less time..
  • IMPROVE YOUR WORKOUTS: There's nothing worse than a slick bar that makes lifting weights dangerous. With the Black Diamond No Hole Grips, you can save yourself from painful blisters and focus on improving your performance. The synthetic material and wrist strap protect your palms, offer comfort, and give you the stability you need to work out longer..
  • VERSATILE PERFORMANCE: These lightweight cross-training grips allow you to perform a wide range of movements in a short period o....
Check Stock

Tattoo Self-lock Grips,SOTICA 4Pcs Tattoo Grips Aluminum Handle Professional Tattoo Machine Grip with Back Valve Stem for Apply to Any Artists and Beginners(22mm)

  • BASIC SPECIFICATION - 4Pcs 22mm Grip Aluminum Alloy Self Lock Handle,Diameter: Approx 0.9 inch/22mm.
  • Length: Approx 1.9inch/50mm. 0.9 inch 22mm ergonomic,This professional tattoo machine handles are specially designed for beginners..
  • SELF-LOCK DESIGN - The tattoo grip is well designed,portable and professional to use and have great grips and shockproof when operating. Knurled design makes them non-slip and for stable performance, they are comfortable for you to use..
  • EASY TO OPERATE - Tattoo Self-lock Grips can be mounted on coils, motor machines and other tattoo supplies Fits any standard size tattoo machine and includes a steel rear grip and a steel rear handle Fully autoclavable and easy to clean..
  • HIGH QUALITY - This handle is made of high quality aluminum material and 304 stainless steel. The weight is moderate and easy to carry. Knurling process and mirror polished finish, good anti-slip stability, a professional tool for all tattoo artists..
  • SATISFACTION GUARANTY- Commitment to excellent products, and to your satisfaction. If you are not satisfied with the aluminum alloy grips for any reason simply email us and we will help you solve the problems in time when you order our products..
Check Stock

Tusk ATV Lock-On Heated Grips

  • Contains 2 locking molded ATV grips, 5 mode heat controller and wire harness.
Check Stock