Reviews Loading Dock Ramp Bumpers

Vestil PE-2572 Electric Hydraulic Edge-O-Dock Leveler, Steel, 72\ Usable Width, 25,000-lb. Capacity

  • Electric hydraulic dock leveler for correcting height differences between truck and loading dock.
  • 18" high bumpers on each end for protecting dock and truck.
  • 1/3 HP, 115 Volt, 1 phase motor with control button for easy operation.
Check Stock

Guardian 6\ Deep Molded Rubber Dock Bumper - 12\ H x 24\ W

  • Type: Extruded Dock Bumper, Style: D-Shape.
  • Hole Spacing: 2 Hole, Dimensions12 inch x 4 inch x 4 inch (L x W x H).
  • For commercial loading docks, warehouses, parking garages, and marinas. For vehicles such as tow trucks, trailers, and heavy duty construction equipment. Helps protect the rear of a truck or trailer when backing into a loading dock or delivery bay.
  • Pre-drilled, countersunk mounting holes for easy installation, and are drilled to accept up to 3/4 inch anchor bolts..
  • Compatible with vehicle type: Universal Fit, Common use on Delivery Truck, Truck Bumpers, Refuse Truck, Trailers.
Check Stock

Car Driveway Curbside Bridge Ramp - Heavy Duty Rubber Threshold Curb Ramp Used for Loading Dock Garage Sidewalk Truck Scooter Bike Motorcycle Wheelchair Mobility Other Vehicle - Pyle

  • INTEGRATED MOUNTING HOLES: The Pyle Vehicle Curb Ramp can be permanently installed in high traffic areas using the integrated mounting holes at the....
  • HIGH QUALITY RUBBER: This mobility street curb ramp is made of industrial grade rubber material which protects your car from vibration and reduces the....
  • MULTIPURPOSE USAGE: The outdoor threshold car ramp gives access to a lowered car auto vehicle, SUV, van, mobile wheelchair, motorcycle, bike, scooter....
  • 10,000 LBS LOAD CAPACITY: This solid utility curb ramp can support up to 5 tons or 10,000 lbs allowing standard vehicles to be driven safely up or....
  • SUPERIOR FLEXIBILITY: The heavy duty 4 feet car ramp is surprisingly flexible making it suitable for curb, home garage, loading dock and house....
Check Stock

Pyle Car Driveway Curb Ramp - Heavy Duty Rubber Threshold Ramp - Also for Loading Dock, Garage, Sidewalk, Truck, Scooter, Bike, Motorcycle, Wheelchair Mobility & Other Vehicle - Pyle PCRBDR24

  • ...terials. Made of industrial grade rubber material which protects your car from vibration & reduces the noise when you drive in or out through the curb.
  • SUPERIOR FLEXIBILITY: The heavy duty 4 ft car ramp is surprisingly flexible making it suitable for curb, home garage, loading dock & house driveway use.
  • LARGE CAPACITY: With a ramp size of 4 ft wide x 16 inch deep & on a flat surface, this solid utility curb ramp can support up to 5 tons or 10,000 lbs allowing standard vehicles to be driven safely up or down uneven ground or curbside.
  • PREFORMED HOLES: The outdoor threshold car ramp can be permanently installed in high traffic areas using the integrated mounting holes at the edges of the ramp. It also has built-in water or cable channel in the bottom.
Check Stock

Ruedamann 85\ x 54\ Aluminum Folding Loading Ramp, Foldable Loading Ramp for Lawnmowers,ATVs,UTVs, Motorcycles,Trucks etc, Snowmobile Loading Ramp with Multi-use,Holds up to 1500 lbs

  • 【MULTIPLE USE】You can remove the polyethylene conveyor belt on the loading ramp surface during transport ATV & UTV, lawn mower, truck, motorcycle, trailers, dirt bike and garden tractor onto the bed of your truck for easier transportation.When you use the loading ramp as snowmobile ramp with polyethylene conveyor protectors gives you the freedom to load your snowmobile..
  • 【UNIQUE HINGE】The hinge of the loading ramp is fixed by rivets and welding, double protection, which enhances the bearing capacity of the ramp and makes the ramp more durable..
  • 【OUR DIFFERENCE】The head plate of the loading ramp is firmly fixed with rivets and is strong and durable and the design of the extended head plate can make the force of the ramp to the vehicle more balanced and stable.There're also plastic plugs at the head of the ramp, which can not only protect our hands from being scratched by the ramp, but also protect our car paint from being scratched by the ramp..
  • 【STRONG&DURABLE】The loading ramp is 85 inch (216cm) long by 54 inch (137cm) wide.This loading ramp is made of lightweight and durable aluminum, net weight is about 44 lb (20kg). Max load capacity up to 1500 lb (680kg). Maximum recommended height is 30 inches (75cm). Aluminum alloy has high hardnes....
Check Stock

BEJONI 67 x 8.7 Steel Loading Ramps for Truck & Trailer 950 lb Capacity Motorcycke Ramp Separated Ramp Kit for DIY Install 1 Pair

  • Unfolding size of loading ramp:67'' x 8.7'' x 1.9''(170cm*22cm*4.7cm). Folding size: 35.4'' x 8.7'' x 4.1''(90cm*22cm*10.5cm).Convenient for storage in our home and easy to carry out by our car, saving lots of space. Note: Please wear gloves when using.The recommended height range is 16.7"-19"(42cm-48cm)..
  • The side handle is fixed on one side. After retracting the ramp, The hole on the tension strap can be used as a handle through the raised lock on the other side, which is convenient to carry the ramp..
  • Packaging components: 2 loading ramps, 2 top support ramp kits, 8 mounting screws, 8 mounting nuts, 8 flat washers and 8 lock washers.After getting the heavy duty steel loading ramp, taking out all the accessories and install the top support ramp kit on the loading ramp. The sequence of washers is: install flat washer first and then lock washer.Confirm that the installation is firm before using the ramp..
  • The anti-skid design on the surface of the loading ramp can form strong traction and friction on the ramp surface. The back of the topboard is provided with EVA anti-skid pads, which can not only prevent the car from being scratched, but also form a certain friction force with the car to prevent slipping and falling..
Check Stock

6 ft. Aluminum Folding Ramp Mfg in The USA, 400DR - ATV/Snow Blower Ramp

  • In Stock with a delivery time of 1 to 5 days. Photos illustrate loading onto a F-250 with a 36" high tailgate. Made in the USA and manufactured with the finest 6005T5 aluminum alloy. Two safety straps and safety instructions included. One year limited warranty..
  • Lightweight, weighing only 30 lbs. The ramp is 5'-11" long (incl. red tips) by 40" wide. Folds to 20" wide for easy storage..
  • 1,000 lb. 4 wheel distributed load capacity. Serrated cross-rod design spaced 2-3/4" apart for excellent traction..
  • This 6 ft folding ramp will work when loading snow blowers or small/midsize ATV's onto a 36" high tailgate. However you may prefer a 7 ft long ramp. A longer ramp will reduce the loading angle. This ramp is NOT recommended for loading motorcycles up the middle of the ramp. It's designed for 4 wheel and 2 wheel side by side loading (i.e. snow blower). For ramps with stronger center support, built to handle the weight of a large motorcycle riding up the center please look for the MCDR ramps..
  • This model is available in a similar less expensive model. SEARCH #400 Ramp. The 400 ramp has the cross-rods spaced 5-1/2" apart..
Check Stock

Taylor Made Products DB3.30 Dock and Post Bumpers Medium,4 1/2 W x 1 3/4 D 3-Foot

  • VERSATILE PROTECTION—Our dock and post bumpers can be installed with the sturdy one-inch flexible tab as a ‘fold over’ or a ‘top deck mount’-your choice. These bumpers will offer long-lasting protection with either option for your boat and dock.
  • DURABLE — Made with a strong polyester textile cover and a closed-cell foam inner cushion, these Taylor Made dock and post bumpers withstand the rigors of the marine environment and will not fade in the sun. These will last for many boat seasons.
  • A VARIETY OF PROFILES— Available in a wide range of sizes up to 50’, our dock bumpers are sure to fit your specific dock or vertical posts. The flexible material works well with stubborn corners and hard to fit curves -for the best all-around protection.
  • UNRIVALED QUALITY — Engineered and designed for the marine industry, our Taylor Made dock bumpers are made from the brand who has set the design standard for more than a century. From the flexible material to the secure installation tab-quality abounds.
  • MADE IN THE USA — Our boat dock bumpers for boats are built in the USA. Boaters know they can trust Taylor Made to deliver the highest quality products and most protection when they are on the water-the top choice of boaters everywhere.
Check Stock

EZ-ACCESS TRAVERSE Singlefold Edgeless Portable Loading Ramp, 8'

  • FOLDABLE EDGELESS LOADING RAMP: With its curbless design, this heavy-duty loading ramp allows wider equipment with inset wheels such as lawn tractors and recreational vehicles to be loaded with ease. Durably constructed for high-traffic, all-weather use..
  • SAFE AND PORTABLE: This ramp folds to 15.5" wide for easy stowing in truck, trailer, shed, or van.
  • Slip-resistant solid surface provides superior traction while traversing the ramp.
  • FULL-LENGTH HINGE: A full-length hinge allows uniform weight distribution and eliminates load deflection. Rated load: 1000 lbs. Ramp can be separated into two sections for wider loads. Rated load per ramp: 500 lbs..
  • Safely load equipment, lawn mowers, wheelbarrows, tools, snowblowers, dirt bikes, motorcycles, and recreational vehicles, anytime, anywhere. Our ramps are durably designed to withstand harsh environments and offer a rust-proof, maintenance-free loading solution for years..
  • Access Anywhere: Our selection of portable loading ramps offers both temporary and permanent....
Check Stock

Ruedamann Loading Ramp with 750 Lbs Capacity, Foldable Aluminum Ramp for ATV/Motorcycles/Trucks (1 Piece, 7.5 Feet Length × 11 Inches Width, Raised Grain Non-Skid, Silver)

  • 【Perfect for Loading & Unloading】The loading ramp is made of aluminum which makes it long lasting and is lightweight with a weight of about 17.6 lb (8kg) only. This ramp can be used for both loading and unloading endless times without any hassle of it getting glitched as its made of heavy duty welded hinges, joints and crossbars. The hinges are 2.8 inches (7cm) in length which makes it 1 inch (2.5cm) longer than normal commercial ramps giving a safer loading experience..
  • 【Exclusive Construction】There are 3 fingers on the top surface of the loading ramp to help the vehicle from slipping off giving a more secure & reliable pick up. The soft tipped design also cuts down scraping between your ride and the ramp..
  • 【Heavy Duty& Safe】The ramp comes with heavy duty loading straps to securely fasten the ramp on to the tailgate to avoid movement hence you don't have to worry about buying the straps separately. While loading & unloading please don't ride the vehicle. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence..
  • 【Track Dimension】The foldable size of the ramp is 45.4 inches x 11 inches x 5.7 inches (115 x 28 x 14.5cm) and the unfolded size of the ramp is 87.6 inches x 11 inches x 2 inches (222.5 x 28 x 5c....
Check Stock

Titan 3-Beam Truck Loading Ramp for Motorcycles and Recreational Vehicles, 8'

  • SPECIALLY DESIGNED: The special arched design of our ramp allows you much better clearance than other loading ramps. This folding ramp also features serrated crossbars to allow for great traction, so you can trust it to function even in wet weather conditions. Now you can load your expensive and valuable recreational vehicles with ease and safety like never before!.
  • EFFECTIVE LOADING RAMP: At Titan, our goal is to help simplify your life. That’s why we developed this handy loading ramp. It’s perfect for when you need to load motorcycles or recreational vehicles. Use it for bikes, cruisers, ATVs, UTVs, and more. It has a 3-beam design, allowing for a weight capacity of 2,200-pounds of distributed weight..
  • SAFETY STRAPS INCLUDED: To better secure your valuable cargo, we’re happy to include safety straps with the delivery of these amazing loading ramps. Use them to strap down your vehicles to your truck bed or trailer, keeping everything right where it should be as you travel. This is just another way that Titan helps you get the most out of each product you buy!.
  • DURABLE MATERIAL: This loading ramp is made from heavy-duty aluminum for long-lasting, durable construction. Because it’s made from aluminum, it’s incredibly lightweight, weighing ....
Check Stock

Taylor Made Products Dock Pro Vinyl Dock Bumpers Corner 10 x 10 ,Black

  • ULTIMATE PROTECTION — Prevent your boat from damage while docking with our dock bumper -the 1 ¼” cushion softens any blows and protects the top and sides of the dock. The bumper’s color is molded into the vinyl and won’t transfer to your boat.
  • DURABLE — Made with the same durable marine-grade vinyl of our boat fenders, our dock bumpers are constructed with marine-grade vinyl that will provide long-term protection to both your dock and boat. They withstand the elements and won’t fade in the sun.
  • UNRIVALED QUALITY — Engineered and designed for the marine industry, our Taylor Made dock bumpers are made from the brand who has set the design standard for more than a century. Easily protect your dock and boat with these premium bumpers.
  • SIZES — Available in corner mount 10”, our dock boat bumper installation is truly a one-person job. The solid bumper straps can be easily drilled into any dock with nails, screws or washes- hardware not included.
  • MADE IN THE USA — Our dock bumpers for boats are built in the USA. Boaters know they can trust Taylor Made to deliver the highest quality products and most protection when they are on the water-the top choice of boaters everywhere.
Check Stock

Pyle Car Vehicle Curbside Driveway Ramp - 2PC Heavy Duty Rubber Threshold Bridge Track Curb Ramp for Loading Dock Garage Sidewalk Truck Scooter Bike Motorcycle Wheelchair Mobility PCRBDR45

  • MULTIPURPOSE: Pyle 2PC Vehicle Curb Ramp can be used for a variety of purposes. Gives access to lowered car auto vehicle, trailer, trucks, forklift,....
  • HEAVY-DUTY: These mobility curb ramps for the driveway are constructed from durable and high-quality materials. Made of industrial-grade rubber....
  • TEXTURED SURFACE: The heavy-duty automotive car ramp is flexible making it suitable for the curb, home garage, loading dock, and house driveway use.....
  • 55, 000 LB LOAD CAPACITY: These driveway ramps for low cars have a ramp size of 19’’ x 11. 82’’ x 4. 1’’ -inches. On a flat surface, it....
  • PREFORMED HOLES: These lightweight outdoor threshold car ramps for low cars can be permanently installed in high traffic areas using the integrated....
Check Stock