MS3C-PRO X Commercial X Frame Multi-Height EMS Stretcher, Weight Capacity 550 lbs
- Adjustable height includes 7 locking positions * X-frame undercarriage is easily raised when loading * Constructed of high-strength aluminum alloy * Pneumatic Adjustable Backrest: 0 - 65 degrees.
- Locking side rails collapse for safe patient loading and unloading * Safety locking device keeps stretcher locked in place while the transport vehicle is in motion * When unloading, the safety U-bar will hold the stretcher on the ambulance until the operator releases it * Breakaway head section secured with hook and loop fasteners.
- Included accessories: 4 inch seamless welded foam mattress, (3) Vest type belts for chest, hip, and knee, Transport Safety Locking Device, IV pole included.
- Positions Loading Height / Overall Height: Position 1: Ground /16in Position 2: 8.5in / 24in Position 3: 12.5in / 28in Position 4: 16.5in / 32in Position 5: 20. in / 36in Position 6: 24in / 40in Position 7: 27in / 43in Position 8: 31in / 46in.
- Specifications: High Position:78.75 X 22 X 39.25 in Low Position:78.75 X 22 X 16 in Maximum Angle of Backrest: 75 degrees Maximum Angle of Legrest: 35 degrees Weight C....
Check StockBlack Widow Aluminum Double eBike or Fat Tire Bike Carrier - 600 lb. Capacity
- Lightweight, high-strength aluminum carrier and loading ramp.
- 600 lb. total weight capacity - 400 lbs. maximum per bike.
- Dual-purpose design is sturdy enough for dirt bikes.
- Transport up to two eBikes or fat tire bikes.
- 45.5" L self-storing loading ramp with a welded hook.
- Roll-on, roll-off ramp design for easy loading and unloading.
- Includes an anti-rattle device to prevent tilt and wobble in motion.
Check Stock
MS3C-100S,Double Top Lightweight Emergency Transportation Stretcher/Gurney/Spine Board Weight Capacity 350 lbs
- Constructed of high-strength aluminum alloy, light and durable. 2" think foamed cushion for extra patient comfort. Adjustable backrest allows for multiple adjustments keeping the wounded comfortable. Only one person needed to load the stretcher into the emergency vehicle. Bumper rails attached to the stretcher legs protect the frame while loading. Siderails drop to allow for easy patient loading and unloading.
- Legs automatically fold under the stretcher when loading into the vehicle. Locking device included to lock the stretcher in place during transport. Two Dual locking rear wheels with sealed bearings stabilize patient loading and unloading. Rotating casters increase the range of motion and sharper turn radius for use in confined spaces. Light-weight, aluminum construction. Patient restraints included.
- 350 lb load capacity. Maximum patient load height: 37in Vehicle Loading Height: 25 in.
- Specifications: 75 x 22 x 36. Highest dimensions 75 x 22 x 11 lowest dimensions. Unit weight 80 lbs 65-degree maximum backrest angle adjustment.
Check StockEGO BIKE 500LBS Steel Motorcycle Scooter Dirtbike Carrier Hauler Hitch Mount Rack Ramp Anti Tilt
- Anti-tilt locking device. To get a updated version, you can search for the ASIN B07NP82M1T on Amazon. Loading ramp and Designed to safely carry up to....
- This is a great way to your motocross bike, scooters and off road dirt bikes. It's heavy-duty steel frame makes it reliable and gives it strength and....
- Anti-tilt locking device (prevents wobble).
- Heavy-duty power-coated steel construction.
- Carrier overall dimensions: 76"(L) x 7"(W). PLEASE NOTE:Trailer hitch pin not included!!....
- EASY TO INSTALL: The motorcycle transporter can be easily assembled and operated, reducing the hassle of trailers and trailers. The sturdy and durable....
Check StockXtremepowerUS 500lbs Motorcycle Dirt Bike Scooter Carrier Hauler Hitch Mount Rack with Loading Ramp Kit
- Portable Design - There is a loading ramp for loading your cycle on the carrier. It is extremely portable. Once loaded, the loading ramp attaches on....
- Widely Applicable - Carrier fits any 2 inch square receiver, 2 inch square class III, IV, or V trailer hitch. It is a great choice for your motocross....
- Solid Material - Hitch mount carrier is made of heavy duty steel tubing, The largest capacity is 500 lbs and the solid construction makes it reliable....
- Security Assurance - Anti-tilt locking device, it can prevent wobble. Even if you are on the bumpy hillside, it will provide you a secure transport....
- Easy to Assemble - All mounting hardware is included for quick and easy installation. No professional tools are needed..
Check StockAmazonBasics 15.6-Inch Laptop Sleeve - Black
- Form-fitting sleeve with quick top-loading access.
- Precise fit for laptops and ultrabooks with a 15.6 inch display.
- Slim design allows you to carry the case by itself or in a bag.
- External Dimensions: 16.2″ x 11.8″ x 0.8″ (LxWxH).
- Internal Dimensions: 16″ x 11.5″ x 0.7″ (LxWxH).
- Form-fitting neoprene construction protects your Device.
- Protect your laptop from bumps and scratches.
- Precise fit for laptops and ultrabooks with a 15.6-Inch display.
Check StockCodinter Kayak Roller, Kayak Load Assist with Heavy-Duty Suction Cups Mount
- ⛵【Why Slight Shaking】Due to different car rear windows have different radians, so the specially designed for the slight shaking between the metal tube that fits inside the suction device to make the suction cup better fits the angle of the glass automatically therefore to achieve the best suction effect.
- ⛵【Rotating Foam】With thickening 360 degrees smooth-rolling foam pad to protect the hull during loading.
- ⛵【Strong Suction Cups】Heavy-duty C-type aluminum bars with 2 strong suction cups mount reliably capacity 220lbs. It can be used in most vehicles.
- ⛵【Thoughtful Towel】Clean the rear glass with our soft towel to get good suction contact, make sure the boat roller is security before used.
- ⛵【Easy to Use】Personal boat-loading assistant eliminates the battle for solo car-top boat loading, quick, simple, smart to load a kayak to a car top.
Check StockMini UPS Battery Backup 37Wh Uninterruptible Power Supply for Router, Modem, Security Camera with Input 5V DC Output 5V DC Max.3A Support Micro USB
- Mini uninterruptible power supply for power outage, compatible with router, modem, security camera, DSL, and other 5V DC and Micro USB devices, and can still use WiFi in case of power outage..
- Compact 5V DC backup battery, built-in 10000mAh 37Wh Li-polymer battery, offers a long backup time for the loading device..
- Input: DC 5V or Micro USB 5V Max.3A, Output: DC 5V or Micro USB 5V Max.3A, support 0.5A, 1A, 1.5A, 2A, 2.5A and any current below 3A. No charger included, please use the original charger of the loading device..
- Including 1×DC cable 5.5×2.5mm, 3×DC jacks 5.5×2.1mm, 4.0×1.7mm, 3.5×1.35mm and 1×Micro USB jacks..
- Multiple smart protections: short circuit protection, voltage fluctuation protection, overcharge protection, over discharge protection, temperature protection, safe to use..
Check Stock
Replacement Accessories Vented Oven Lid + Loading Spoon & Cleaning Brush Kits for PAX3&2 (Pax2&3 Vented Oven Lid + Loading Spoon + Cleaner Brush)
- Vented Oven Lid + Loading tool & cleaning brush kits Fit For Pax2&3.
- Grade Materials: Vent Oven Lid Made Of High Heat Resistant Medical Grade,Healthy, more Environmentally friendly and economical.Loading tool Made of 6061 Aluminum Medical Grade, Lighter,Safer..
- Healthy & Environmentally friendly & economical: They are Perfect Combination,including excellent vented oven lid and loading tool fit PAX2PAX3 perfectly. The holes of vented oven lid provide a smoother, fuller draw,increases the otput ten fold.
- and the loading tool .This is a must have Major improvement accessory..
- DON’T need Aftermarket oven plates with this Lid! The stock PAX2&3 plates will do (the things that hold up the herb & fall out when a pipe cleaner is run through the device)..
- [FREE BONUS GIFT]- Get More For Less When You Order it. We Now Include A Bonus 2 pieces steel Cleaning brushes——the cleaning brushes with Multi-purpose usage, with Each package of the items for Pax2Pax3..
Check Stock
SPEED BEEZ® Lever Loader Sig Sauer® P365® 9mm Magazine Loader (Does NOT Work with P365® 380!)
- Magazine Loading Tool- Specially designed to fit Smith & Wesson S&W M&P Shield 9MM Single Stack handguns magazines. This speedloader only fit with S&W M&P Shield, does not work on the magazines of the Smith and Wesson M&P Shield Plus..
- Increase Speed and Save Your Thumb– This Speed Loader increase your speed and helps you enjoy your shooting experience up to the last round without having sore fingers and injury by loading your magazines fast and easy..
- The construction is made of a tough polymer, as opposed to a more flimsy plastic, and the shape is fairly ergonomic as well. Offering shooters a means to quickly and efficiently load magazines, the device saves thumbs and time on the range.
- Compact in Size & Highly Durable - A RAE Industries magazine loading tool is an ultimate accessory to your range or conceal carry gear. Not only does it save your hands during the loading process, it also is a necessary item to go along with your holster, grips, extensions, optics, and other comfort and target practice accessories. Fits conveniently inside a pocket, purse or range bag..
- Available in Many Color Options for High Visibility and Fast Identification - BLACK, BLUE, RED, ORANGE, PINK, PURPLE, GREY, COYOTE TAN-BROWN, OLIVE DRAB GREEN. Give your thumbs a ....
Check Stock
1Zero Rock Solid Cup Holder Phone Mount for Car Low Profile No Shaking Long Arm 2in1 Air Vent Car Phone Mount Compatible with All iPhone Samsung Cell Phones for Truck SUV Tesla Golf Cart Boat
- ...piest road. No more shaking, no more wobbling as the gooseneck cup phone holder. With a three-sided triangle hold, it will hold even a big cell phone in place..
- [Low Profile Adjustable Car Cup Phone Holder] 1Zero cup phone holder has a 1-inch thick arm, with a precise gear loading mechanism, that allows you to adjust the height of the car phone mount in 1 second, just simply pull or push to have an optimal operation point. Solid thick arm, no breaks, no shakes..
- [No Blind Spot] With a 17mm big ball joint that allows you rotate your cell phone in 360 degrees for either portrait or landscape view, also allows you to swivel the device upward or downward in 90 degrees. A 360° rotatable gear loading neck allows you to switch the phone holder for the passengers easily and quickly..
- [Considerate Details] One-handed operation with a quick-release textured button, mount and release your device in seconds with only one hand. A reserved charging slot helps you charge your device easily and quickly. Tool-free installation. Switch from car to car easily..
- [Extra Screw-Locked Vent Clip] You can....
Check Stock
SIOTI Mini Ball Head, Mini Tripod Ball Head, 360 Degree Rotation+Tilting Adjusting, Compatiable with Digital Card Camera/Microphone/Cell Phone/Action Camera/Light LED(Ultra-Mini Ball Head)
- 【Wide Compatibility】The ultra mini ball head can work with action camera, camera flash, microphone, mini digital camera , mini telescope, mini tripod, media expansion cage, etc. by 1/4″ internal and external thread mount.
- 【High Reliability】The mini ball head is almost made of aluminium alloy, and is machined by high-precision CNC, max loading of horizon is 5kg(no slip once locked).
- 【Special Designing】Knob was designed scalability, the function can help us easliy lock all device.
- 【Easily Handing】By 1/4″ internal and external thread, easily fix electronic device on bearing equipment, and loading ball can be rotated with 0~360º horizontal swivel & -90º~45º vertical swivel, easily move to angles we want,.
- 【Anticathode Oxidation】The super mini ball head was treated to black and red color by anticathode oxidation which greatly improves the rigidity and anti-corrosion, attractive.
Check Stock
RAEIND Smith & Wesson M&P Shield Single Stack 9mm Pistol Magazine Speed Loader
- : Specially designed to fit Smith & Wesson M&P Shield 9MM Single Stack handguns magazines. This speed loader only fit with & & , does not work on the magazines of the Smith and Wesson M&P Shield Plus..
- : This Speed Loader increase your speed and helps you enjoy your shooting experience up to the last round without having sore fingers and injury by loading your magazines fast and easy..
- : The construction is made of a tough polymer, as opposed to a more flimsy plastic, and the shape is fairly ergonomic as well. Offering shooters a means to quickly and efficiently load magazines, the device saves thumbs and time on the range.
- & : A RAE Industries magazine loading tool is an ultimate accessory to your range or conceal carry gear. Not only does it save your hands during the loading process, it also is a necessary item to go along with your holster, grips, extensions, optics, and other comfort and target practice accessories. Fits conveniently inside a pocket, purse or range bag..
- : Available in Many Color Options for High Visibility and Fast Identification - BLACK, BLUE, RED, ORANGE, PINK, PURPLE, GREY, COYOTE TAN-BROWN, OLIVE DRAB GREEN. Give your thumbs a break!.
Check Stock
