Reviews Load Isolation Switches

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

USB Isolator ESD Protection Ground Loop Isolator ADUM3160 Only USB 2.0 Full/Low Speed up to 1W Power

  • Remove ground loops, protect PC, eliminate humming noise.
  • Signal isolation up to 2.5KV, power isolation up to 1.6KV.
  • Supports USB 2.0 Full/Low Speed, ⚠ USB 2.0 High Speed Devices are not supported ⚠.
  • Up to 1W load capacity, ⚠ not for charging or devices drawing over 180mA.
  • Uses ADUM3160 IC for signal and B0505S for power isolation.
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

2 RockvilIe RHT8C Computer/Bookshelf Desktop Speaker/Studio Monitor Stands-Wood

  • (2) Rockville RHT8C Computer/Bookshelf Desktop Speaker/Studio Monitor Stands-Wood, Finished with premium furniture-grade paint that will not crack, chip, or peel..
  • Made from high quality medium density fiber core to minimize resonance, Isolation pads create a no-slip surface as well as improve acoustical performance.
  • 66 lbs. load capacity allows you to use a heavier speaker without compromising stability. Specifications: Stands Height: 8", Base plate size: 11.8" 9", Top Platform size 1: 9.25" 7.28".
  • Item Load weight capacity: 66 lbs. Item weight per pair 9.6 lbs. Shipping weight 11.5 lbs. Color: Wood, Shipping dimensions 13.8” x 10” x 11.4”.
  • Product dimension 11.8” x 9” x 8”, Includes: 8 Isolation pads, 4 Cable clips, 4 Cable ties, 16 Screws.
Check Stock

Blue Sea 5046 Atc Compact Fuse Block With Cover, 8 Circuit 19-143

  • Quality Switches For Automotive / Industrial / Marine And Many Other applications.
  • 8 Circuit, Rated For 6 To 32 Volts. Maximum Load Per Fuse/Circuit Is 30 Amps, Max Load Capacity For All Circuits Combined Is 100 Amps.
Check Stock

Square D - B300 3-Inch Bolt-On Hub for Square D Devices with B Openings

  • For use in Square D load centers, CSED devices and safety switches.
  • Can be used for outdoor load centers and safety switches.
Check Stock

Square D - B250 2-1/2-Inch Bolt-On Hub for Square D Devices with B Openings

  • For use in Square D load centers, CSED devices and safety switches.
  • Can be used for outdoor load centers and safety switches.
Check Stock

Rockville Pair Computer/Bookshelf Desktop Speaker/Studio Monitor Stands (RHT8G)

  • Includes: 8 Isolation pads. 4 Cable clips. 4 Cable ties. 16 Screws.
  • Made from high quality medium density fiber core to minimize resonance. Isolation pads create a no-slip surface as well as improve acoustical performance..
  • Specifications: Stands Height: 8″. Base plate size: 11.8″ 9″. Top Platform size 1: 9.25″ 7.28″..
  • Item Load weight capacity: 66 lbs.. Item weight per pair 9.6 lbs.. Shipping weight 11.5 lbs.. Shipping dimensions 13.8” x 10” x 11.4”. Product dimension 11.8” x 9” x 8”.
Check Stock

2 Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater, Black

  • Includes: 8 Isolation pads. 8 Brass spikes. 8 Rubber spikes. 4 Cable clips. 4 Cable ties. 16 Screws.
  • Features: (2) Rockville RHTSB 36" Inch Bookshelf Speaker Stands Surround Sound Home Theater..
  • Pair Rockville RHTSB high performance wood speaker stands. (2) Pairs of Top Platforms for different size speakers. Finished with premium furniture-grade paint that will not crack, chip, or peel.. Made from high quality medium density fiber core to minimize resonance. Brass & Rubber spikes add stability to any floor surface. Isolation pads create a no-slip surface as well as improve acoustical performance..
  • Empty body design allows you to add sand in order to increase the weight of the stands if needed. 60 lbs. load capacity allows you to use a heavier speaker without compromising stability.. . ..
  • Specifications:. Stands Height: 36". Base plate size: 11.8" 9.25". Top Platform size 1: 9.25" 7.28" (For smaller size speakers). Top Platform size 2: 9.25" 11.8" (For larger size speakers up to 8"). Item Load weight capacity: 60 lbs.. Item weight per pair 25 lbs.. Shipping weight 29 lbs.. Color: Black. Shipping dimensions 36” x 11.4” x 9.25”. Product dimension 11.8” x 9.25” x 36”.
Check Stock

STEREN Coaxial Cable Splitter - Coax A B Switch - Coax Splitter 2 Way Two Way Splitter - A B Switch - 2 Way Coaxial Cable Splitter - Coax Cable Splitter - 2 Way A/B Slide Switch - 1 Pack 200-310

  • AFFORDABLE AND EFFECTIVE: Say goodbye to expensive electricians with our AB switch box!.
  • 2 WAY COAXIAL A B SWITCH: Switches between 2 input sources. 75-ohm input/output.
  • HIGH ISOLATION TV AB SWITCH: Steren's AB slide has a 90dB high-isolation and bandwidth of 5-900MHz..
  • F TYPE COAXIAL SWITCH: This coaxial cable switch works for F-type female ports..
  • EASY INSTALLATION: Our coax cable switch makes installation easy with our hardware and adhesive pad..
Check Stock

Tripp Lite SmartOnline Step Down Isolation Transformer, 208V to 120V, 5kVA, 5kW, 2U Rack-Mount, TAA (SU5000XFMR2UTAA)

  • 【Work Stability】: Ring Transformer Model EI-14. Lead-free compatible electronic components. Isolation transformers, select high quality materials, stable work, convenient, long life..
  • 【AC impedance】: 600: 600 ohms. o Tightly coupled to the isolation transformer, primary and secondary windings, there is sufficient passband, the original winding inductance, small leakage inductance, can reduce the impact of lag loss..
  • 【High efficiency】: audio transformer 1: 1. These isolation transformers all high efficiency O transformers, EMI, high voltage, and stable performance..
  • 【Conversion voltage】: 10 PCS audio transformer 600: O transformer is typically used for conversion voltage or transform load impedance. Cyclic core.
  • 【After sales protection】: If you have damage or other questions, please contact us, we will reply you and handle any questions about you..
Check Stock