Reviews Load Controller

EpRec 30A 12V 24V PWM Solar Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery

  • 【Upgraded Solar Panel Controller】This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • 【LCD Display】Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A..
  • 【Intelligent Control】This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • 【Safe to Use】PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc..
  • 【Customer First】12 months honor warranty from EpRec and 24hrs after service.Your satisfaction is our priority..
Check Stock

MPPT 60amp Solar Charge Controller 12v 24v 36v 48v auto max 150V Solar Panel Regulator Input fit for Lead Acid Lithium Gel Battery

  • 【HIGH TRACKING EFFICIENCY】- Solar charge controller adopts advanced MPPT technology that ensures fast and stable track the maximum power point, high tracking efficiency of up to 99%, and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system. It auto detects 12V or 24V DC system voltages. The max load output current is 20A. If it exceeds the 20 amp DC load (240 watts), the overvoltage protection will turn off the output..
  • 【MULTIPLE ELECTRONIC PROTECTION】- Negative Ground Controller offers overcharging/over-discharging/overload/overheat/short circuit/reverse protection. Maximum degree avoids the damage due to system fault or installation error..
  • 【LCD SCREEN DISPLAY & REMOTE MONITORING】- 20A solar controller is equipped with an LCD screen and LED fault indicators, which can not only check device operating data and status but quickly determine system faults and modify controller parameters. Built-in Bluetooth module, you can download the ‘’ChargePro 2.0'' (new version) or "PVChargePro'' (old version) app for remote monitoring that keeps 300 days of historical data..
  • 【HIGHER HEAT DISSIPATION EFFICIENCY & FULL-LOAD WORKING】- Die-cast aluminum heat sink makes the heat dissipation efficiency higher,....
Check Stock

HQST MPPT Solar Charge Controller 20 Amp Negative Grounded Controller with Bluetooth LCD Display, 12V/24V DC Input Solar Panel Regulator for Gel Sealed Flooded and Lithium Battery

  • 【HIGH TRACKING EFFICIENCY】- HQST 12V 20 amp Solar charge controller adopts advanced MPPT technology that ensures fast and stable track of the maximum power point, high tracking efficiency of up to 99%, and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system. It auto-detects 12V or 24V DC system voltages. The max load output current is 20A. If it exceeds the 20 amp DC load (240 watts), the overvoltage protection will turn off the output..
  • 【PARALELL CHARGE FUNCTION】- 2 HQST MPPT controllers of the same series(M2420N/M2440N/M4860N) can work together to charge the same battery with the parallel charge cable (not included), to meet high power charging requirements and 2 controllers should set the same battery pack voltage. Our negative grounded controller offers overcharging/over-discharging/overload/overheat/short circuit/reverse protection. The maximum degree avoids the damage due to system fault or installation error..
  • 【LCD SCREEN DISPLAY & REMOTE MONITORING】- 40A solar controller is equipped with an LCD screen and LED fault indicators, which can check device operating data and modify controller parameters. Built-in Bluetooth module, you can download the ‘’ChargePro 2.0'' (new version) or the "....
Check Stock

HQST MPPT Solar Charge Controller 40 Amp Negative Grounded Controller with Bluetooth LCD Display, 12V/24V DC Input Solar Panel Regulator for Gel Sealed Flooded and Lithium Battery

  • 【HIGH TRACKING EFFICIENCY】- HQST 12V 40 amp solar charge controller adopts advanced MPPT technology that ensures fast and stable track of the maximum power point, high tracking efficiency of up to 99%, and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system. It auto-detects 12V or 24V DC system voltages. The max load output current is 20A. If it exceeds the 20 amp DC load (240 watts), the over voltage protection will turn off the output..
  • 【PARALELL CHARGE FUNCTION】- 2 HQST MPPT controllers of the same series(M2420N/M2440N/M4860N) can work together to charge the same battery with the parallel charge cable (not included), to meet high power charging requirements and 2 controllers should set the same battery pack voltage. Our negative grounded controller offers overcharging/over-discharging/overload/overheat/short circuit/reverse protection. The maximum degree avoids the damage due to system fault or installation error..
  • 【LCD SCREEN DISPLAY & REMOTE MONITORING】- 40A solar controller is equipped with an LCD screen and LED fault indicators, which can check device operating data and modify controller parameters. Built-in Bluetooth module, you can download the ‘’ChargePro 2.0'' (new version) or the ....
Check Stock

ECO-Worthy 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground…

  • [30A Solar Charge controller]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing.
  • [Multiple Protection Functions]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
  • [Battery Type]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • [LCD Display]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc..
  • [Easy to Install and Operate]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( N....
Check Stock

EATON MOELLER PKZM0-10 MANUAL MOTOR CONTROLLER

  • 【SCR Controller】This item has new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a good solution to over-current of electric stove wire caused by low resistance during cooling..
  • 【1000W】It can easily adjust the output voltage on a scale of 0-100% (nonlinear) to power electric device. It can be used as power supply for large electrical devices of less than 10000W, enough for household appliances or for small factory..
  • 【Heatsink】Designed with large and thick heat sink that would enhance heat dissipation. Voltage regulator has wave voltage absorbing circuit and effective protects large power silicon controlled rectifier, longer service life and more durable..
  • 【Suitable for】Could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc..
  • 【Note】AC input, AC output, output voltage is lower than(or equal to) input voltage.
  • voltage can be adjusted only when connected to load.
Check Stock

Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
  • SJS technology is a mechanical clutch system that minimizes motor and gear damage.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
  • Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

  • This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
  • 【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
  • 【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
  • 【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
  • 【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....
Check Stock

Dutton-Lainson 24874 12V Electric Winch SA12000 DC

  • Capacity of 12,000( single line rated pull ).
  • 4-Way Roller Fairlead to guide the rope onto the drum evenly.
  • No-load current: 85A, load 12000lbs current: 420A.
  • Efficient Three-stage Planetary Gear Train helps to offer powerful horsepower.
  • Free Cordless Remote controller, Corded remote controller with power in and power out functions.
  • Automatic braking in the drum will lock the wire rope and stop pulling when you release button on the switch..
  • Free spooling clutch allows the wire rope to be pulled out without using electric power.
Check Stock

30amp Charge Controller, PWM Solar Controller 30A Fit for MAX 1500W Solar Power 12V 24V 36V 48V Lithium/AGM/Gel/Flooded Battery

  • 30A PWM solar controller, Intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery (Sealed, Gel, Flooded) and Lithium battery (LiCoMnNiO2, LiFePO4).
  • Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control.
  • Controller Automatic temperature compensation and Full protection, like Reverse-Polarity, Battery Reverse, Over-Heating,Over-Current, Over-Load, Low-Voltage Lightning Protection..
  • 4 stages PWM charging: Bulk, Absorption, Equalize, Float.
  • Double USB output 5V/2A and LCD display with Back-lighting shows device’s operating data and working condition.
Check Stock

4 Pack Foldable Controller Wall Mount Holder for Xbox PS5 PS4 PS3 Switch Pro Strong Adhesive/Screw Upgraded Controller Stand Hanger with Anti-slip Pad Universal Gaming Remote & Headphone Accessories

  • Professional Controller Mount: Perfectly fits for universal gaming controllers, including Xbox/Xbox One/Xbox Series S X controllers, PS3/PS4/PS5 controllers, Joy-Con with grip, Nintendo Switch Pro controllers and other third-party controllers. Get 4 packs holders in one amazing package and enjoy your one-of-a-kind controller museum.
  • Upgraded Design: Gear up with the foldable controller wall mount, you can free up more space for your game room and say goodbye to the messy desk. It can be opened or closed. Easily access to the controller but out of the way when not in use. [90°perfect angle] Neatly display all your controllers on the wall.
  • Two Installation Methods: (1) Strong Adhesive - Just peel and stick. Max. load: 3.3lb/1.5kg. (2) Screw & Anchor Installation: A more secure installation option. Max. Load: 6.6lb/3kg. This controller holder can be mounted on various of places, such as on the wall, beside desk, behind the PC monitor, besides PC chassis and shelves. Show your customized controllers anywhere you want.
  • Multi-Protection: 2 anti-slip rubber pads on the controller sitting bed and the raised tip. Keep the ....
Check Stock

SCGK SC-1820 Temperature Controller -58~230°F/110V/1650W/15A Thermostat for Reptiles Digital Thermostat Switch Waterproof Probe NTC Sensor for Greenhouse Homebrew Incubation

  • 【Enhanced Functions】Maximum output load: 1650W (110V). Power-Off Memory.
  • Temperature Calibration. Support High and Low Temperature....
  • 【UL Certification power cable】– SCGK Digital Temperature Controller has high quality power cable, the top quality copper wire can load max....
  • 【Digital Display Window】- Support reading with Centigrade or Fahrenheit unit. Our high temperature controller Probe measurement range:....
  • 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler....
  • 【Widely Applied】 - The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat, pet breeding, incubation,....
Check Stock

HQST 60 Amp 48V MPPT Solar Charge Controller with Built-in Bluetooth and Li Battery Low Temperature Protection Function, Support Two Units in Parallel + 6.6ft RS485 Parallel Charge Connection Cable

  • 【Double the Charging Current】- Get maximum value from your existing solar array systems with different power voltages. Connect two 48V 60A MPPT solar charge controllers to two solar panel systems respectively. Then use the RS485 parallel charge cable to wire two MPPT bluetooth controllers together to double the output current for charging your battery bank system..
  • 【Built-in Bluetooth for Remote Monitoring】- HQST MPPT lithium charge controller keeps real-time and remote tracking of the battery charging status via a dedicated phone app. It provides 300 days of historical data for review. The LCD screen and LED fault indicators allow you to check operating data and status as well as quickly determine system faults and modify controller parameters..
  • 【Powerful Full-Load Capacity】- The filling gel inside provides better PCBA cooling conduction and prevents water, dust, and other damage, extending the service life of the controller. HQST 48V 60A charge controller can work under full load even in a high-temperature environment..
  • 【Low Temp Protection for LiFePO4 Batteries】- Improved BMS provides low-temp protection for lithium batteries. HQST RV solar controller will automatically cut off the charging current to protect the battery’s lifespan.....
Check Stock