Reviews Load Capacity Limit

US Cargo Control 4 Inch x 40 Foot Yellow Winch Strap with Flat Hook

  • High –Tenacity Nylon Moveable Sleeve to protect the strap webbing from abrasion.
  • Durable nylon webbed strap is 2 inches wide by 24 inches long.
  • 10,000 pounds load capacity, 3,333 pounds WLL (Working Load Limit).
  • Durable strap is 2 inches wide by 24 inches long.
Check Stock

AC-DK 110V Electric Hoist 880 lb Crane Lift Ceiling Pulley Winch Steel Wire Rope Emergency Stop Control Switch Safety Operation Gloves Lifting Straps for Factories, Warehouses, Construction, Building

  • ▶【880 LB Load Capacity and Powerful Power】--AC-DK the electric hoist has a 880 lbs load capacity. Single line capacity: 440lbs, 12 m / min (39.4 feet / min). Double line capacity: 880lbs, 6m/min (19.7ft/min). Steel line length: 12 m. Diameter: 4.0 mm.This garage hoist rated volt: 110/120V ~ 60Hz.
  • Horsepower: 1.36 hp. When you use it, you can get strong power and stable use, which greatly improves the stability during use..
  • ▶【Operation Safety】-- The cable winch is designed with a limit configuration to stop at the limit. When the hook is lifted to the highest position, the limit weight contacts the upper limit bracket, and the micro switch of the upper limit bracket can cut off the circuit and stop the motor to ensure safe operation.
  • ▶【High-Quality Material】--Made of heavy duty steel and aluminum, resistant Zinc-Plated to corrosion, rust and wear. Stainless steel wire rope is robust for lifting.
  • Durable hooks meet the demand on strength and hardness. The hoist is equipped with a pure copper motor, high heat dissipation, stability, and very low noise..
  • ▶【Remote Control Limit Switch】--This electric hoist remote control is achieved through a handle switch which is installed on the machine....
Check Stock

Aain E2A4 5/16 in. - 3/8 in. Ratchet Load Binders with Grab Hooks, Ratchet Chain Binder for Chains

  • Easy to operate ratchet chain binder locks securely when binding and releases without the need for extra tools..
  • Clearly stamped with Working Load Limit and Capacity, Includes grab hooks at both ends, which swivel 360° for easy attachment. Painted safety redfor high visibility..
  • Grade 70 Transport Chain in order for your load binding assembly to meet the Grade 70 transport standards for cargo securement set by the US DOT..
  • Ratchet Chain Binder for Chain Sizes 5/16" to 3/8" is manufactured to provide both the strength and durability demanded by fleets and flatbed operators.
  • Working Load Limit:5400 Lbs, Capacity:19,000 Lbs, Fits: 5/16" - 3/8" chain, Handle Length: 14 inches.
Check Stock

Buyers Products Rope Rings (B-601-10) - 10-Pack

  • Recessed mounted Rope Ring measures 5 inches x 3-1/2 inches O.D. and attaches to floor or wall of trucks and enclosed trailers.
  • Zinc plated to resist corrosion. Rated 285 pounds working load limit. Per federal D.O.T. requirements, working load limit is 1/3 of the rated capacity..
  • Requires 3" dia. mounting hole in 3/8" or thicker material. Ultimate breaking strength: 850 lbs..
  • Zinc plated. Mounting hardware not included.
  • Read product description below for more detailed information..
Check Stock

5/16'' Grade 80 Clevis Grab Hook Chain Hook Breaking Strength 18000 LBS WLL 4500 LBS

  • Working Load Limit : 4,500 lbs, Breaking Strength : 18,000 lbs.
  • Material : Grade 80 Alloy Steel, Drop Forged,Painted Yellow.
  • Inspect prior to usage, never exceed working load limit, avoid shock loads.
  • Meets strength and performance requirements of ASME B30.26, 4:1 Safety Factor.
  • Our G80 grab hook chain hook allows for 100% utilization of the chain sling capacity..
Check Stock

Mytee Products Ratchet Tie-Down Straps with Flat Hooks 2 x 30 Ratchet Straps Red | 10,000 Lbs Breaking Strength | TieDown Ratchet Straps for Flatbed Truck Trailers Pickup - 10 Pack

  • ✔ Size: (10 Pack) The ratchet straps with flat hooks and webbing that measures 30-feet in length and 2 inches wide will securely tie down the....
  • ✔ WORKING LOAD LIMIT: This heavy duty tie down strap has a Working Load Limit of 3,333 lbs. with a break strength capacity of 10,000 lbs..
  • ✔ DURABLE POLYESTER WEBBING: Our straps are made of durable polyester webbing. Polyester webbing barely stretches under heavy loads and water slides....
  • ✔ HIGH VISIBILITY: These ratchet straps are a highly visible shade of red..
  • ✔ All ratchet straps are tagged with their working load limit to meet DOT regulations and WSTDA recommended standards..
Check Stock

Mytee Products Ratchet Tie-Down Straps with Flat Hooks, 2\ x 30' Ratchet Straps Yellow | 10,000 Lbs Breaking Strength | TieDown Ratchet Straps for Flatbed, Truck, Trailers Pickup (10 Pack)

  • ✔ Size: 10 Pack The ratchet straps with flat hooks and webbing that measures 30-feet in length and 2 inches wide will securely tie down the largest loads in place.
  • ✔ WORKING LOAD LIMIT: This heavy duty tie down strap has a Working Load Limit of 3,333 lbs. with a break strength capacity of 10,000 lbs.
  • ✔ DURABLE POLYESTER WEBBING: Our straps are made of durable polyester webbing. Polyester webbing barely stretches under heavy loads and water slides right off it..
  • ✔ HIGH VISIBILITY: These ratchet straps are a highly visible shade of yellow..
  • ✔ All ratchet straps are tagged with their working load limit to meet DOT regulations and WSTDA recommended standards..
Check Stock

Mytee Products (4 Pack) 3/8\-1/2\ Heavy Duty Ratchet Load Binder w/ Grab Hooks 9,200 Lbs Working Load Limit | Tie Down Hauling Chain Binders for Flatbed Truck Trailer

  • Working Load Limit:9,200, Capacity:27,600 Lbs, Fits: 3/8" - 1/2" chain.
  • Handle Length: 13.92 inches, Barret Length: 9.92 inches, Take Up: 8.0 inches.
  • Easy to use and adjust, no snap effect, no recoil, Heavy Duty Transport Securement, Manufactured with heavy duty forged steel.
  • Clearly stamped with Working Load Limit and Capacity, Meets FMCSA and DOT Specifications, Note:Ratings governed by the National Association of Chain Manufacturers(NACM)..
Check Stock

GEARWRENCH 42\ 11 Drawer Mobile Work Station, Black & Orange - 83169

  • Heavy-duty, 20 gauge steel frame and drawers provide superior strength.
  • 19, 000 cubic inch storage capacity and a 2, 000 pound load capacity.
  • Drawers use full extension ball bearing slides rated to a 100 lbs. load limit.
  • Top drawer features customizable partition system for ease-of-use.
  • Eva drawer liners come standard as well as a 6mm thick EVA top mat.
Check Stock

Rhino-Rack Jeep Wrangler JL Unlimited 4 Door Hard Internal Structural Roof Rack/Bare Backbone 3 Base Mounting System in Black

  • INCREASED CAPACITY - Strengthen your Jeep Wrangler JL Unlimited hard top so that you can mount a Pioneer Platform & increase your cargo capacity. The Backbone adds structural strength, enabling a higher roof load limit & improves cargo carrying ability..
  • THREE MOUNTING POINTS - The three mounting points on each side of the roof system add mountable capacity and weight distribution for a Rhino-Rack Pioneer Platform, Vortex Bars or Heavy Duty Bars. Perfect for Jeep Wrangler accessories..
  • NO INTERFERANCE - Won't interfere with the removal of your Freedom panels or hard top, since the kit bolts to your hard top both internally with the reinforced structure and externally via the mounting brackets..
  • CARRY MORE - 76% More load capacity (114lbs more) is what you get compared to a roof rack mounted directly to the hard top. The factory non-stationary cap is 150lbs, which means you get an additional 114 lbs carrying capacity with the Rhino-Rack Backbone..
  • INTERNAL BRACKETS install around the window frame and bear the weight from the roof, carrying the load from the roof down in....
Check Stock

Mytee Products (10 Pack 2 Inch x 30 FT Yellow Ratchet Strap with J Hooks - 10,000 Lbs Breaking Strength - Heavy Duty Tie Down Cargo Truck Straps with Wire Hooks for Flatbed, Truck, Trailers Pickup

  • ✔ Size: 10 Pack The ratchet straps with Wire Hooks and webbing that measures 30-feet in length and 2 inches wide will securely tie down the largest loads in place..
  • ✔ WORKING LOAD LIMIT: This heavy duty tie down strap has a Working Load Limit of 3,333 lbs. with a break strength capacity of 10,000 lbs..
  • ✔ DURABLE POLYESTER WEBBING: Our straps are made of durable polyester webbing. Polyester webbing barely stretches under heavy loads and water slides right off it..
  • ✔ HIGH VISIBILITY: These ratchet straps are a highly visible shade of yellow, which makes them easier to use in low-light conditions..
  • ✔All ratchet straps are tagged with their working load limit to meet DOT regulations and WSTDA recommended standards..
Check Stock

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

  • This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
  • RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....
Check Stock

Buyers Products Heavy Duty USA Tiedown Anchors with Backing Plates, Surface Mount D-Ring 6,000 lb. Capacity, 2-Pack

  • This listing is for two (2) zinc plated steel D-rings. This is a home grown product manufactured right here in the USA. Each ring provides a strong 6,000 lb. rated break strength (straight pull) with a W.L.L. (working load limit) of 2,000 lbs. The zinc plated coating provides a weather resistant barrier..
  • RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • APPLICATIONS: These versatile tiedown attachments can be used on the floor of an enclosed or open trailer to secure cargo, tie down motorcycles, ATV's, lawnmowers, light automobiles, or just about anything that needs to be secured during transportation..
  • SPECIFICATIONS: Specifications are illustrated in the secondary image, here are the written dimensions: The 3/8 diameter ring measures 2-1/4 wide x 2-1/4 long on center. The TOP CAP is 1/8 thick. It measures 1-3/16 wide x 3-1/4 long, with 3/8 holes on 2-5/16" center. To get a comparison feel for the siz....
Check Stock