Reviews Lna Module

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock

SparkFun ESP8266 Thing - Dev Board

  • All module pins broken out - On-board FTDI USB-to-Serial.
  • 802.11 b/g/n - Wi-Fi Direct (P2P), soft-AP.
  • Integrated TR switch, balun, LNA, power amplifier and matching network - Integrated PLLs, regulators, DCXO and power management units.
  • Integrated low power 32-bit CPU could be used as application processor.
Check Stock

SparkFun ESP8266 Thing - Dev Board (with Headers)

  • Features: All module pins broken out - Onboard FTDI USB-to-Serial - 802.11 b/g/n.
  • WiFi Direct (P2P), soft-AP - Integrated TCP/IP protocol stack - Integrated TR switch, balun, LNA, power amplifier and matching network.
  • Integrated PLLs, regulators, DCXO and power management units - Integrated low-power 32-bit CPU could be used as application processor.
  • +19.5dBm output power in 802.11b mode - Pre-Soldered Headers.
Check Stock

Nooelec SAWbird+ NOAA - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA Applications 137MHz Center Frequency

  • SAWbird+ NOAA is a self-contained LNA module designed for capturing beautiful weather images available from NOAA satellites (~137MHz).
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • SAWbird+ NOAA can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT).
  • Includes free aluminum enclosure, male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through....
Check Stock

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

  • The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
  • The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
  • The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
  • The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
  • Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check Stock

NooElec SAWbird+ GOES - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA GOES/LRIT/HRIT/HRPT Applications 1688MHz Center Frequency

  • SAWbird+ GOES is a self-contained LNA module designed for capturing beautiful weather images available from NOAA GOES satellites.
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest.
  • The amplifier can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to....
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee XTR v2 (available on Amazon, item ID B06Y1GN5RP).
  • Includes free male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!.
Check Stock

Lana HF - Ultra Low-Noise LF, MF & HF Amplifier (LNA) Module for RF & Software Defined Radio (SDR). Wideband 50kHz-150MHz Frequency Capability with Bias Tee & USB Power Options

  • A wideband, high-performance, high-linearity LNA module designed specifically for HF applications.
  • High gain, very low noise figure, and very low power consumption of .
  • Can be powered through bias tee (3.3V-5V), USB power, or DC power via power header.
Check Stock

Lana HF Barebones - Ultra Low-Noise LF MF & HF Amplifier LNA Module for RF & Software Defined Radio SDR Wideband 50kHz-150MHz Frequency Capability with Bias Tee & USB Power Options

  • A wideband, high-performance, high-linearity LNA module designed specifically for HF applications.
  • High gain, very low noise figure, and very low power consumption of .
  • Can be powered through bias tee (3.3V-5V), USB power, or DC power via power header.
Check Stock

Vega Barebones - Ultra Low-Noise Variable Gain Amplifier VGA Module for RF & Software Defined Radio SDR Highly Linear & Wideband 30MHz-4000MHz Frequency Capability w/Bias Tee & USB Power Options

  • A wideband (30MHz-4000MHz), high-performance, general purpose LNA module with a built-in variable attenuator to maximize usability and portability.
  • The attenuation can be controlled either with the on-board potentiometer (analog control) or push button array (digital control).
  • Dual amplifier design with adjustable gain (20dB-50dB at 100MHz), low noise figure and low power consumption. Can be powered through bias tee....
  • Made in North America. Full 1 year warranty!.
Check Stock

SparkFun ESP8266 Thing - Dev Board - WiFi-enabled microcontroller compatible with Arduino for Internet of Things WiFi Development On-board FTDI USB-to-Serial converter PCB trace antenna U.FL connector

  • All module pins broken out for ease of use. On-board FTDI USB-to-Serial. +19.5dBm output power in 802.11b mode.
  • 802.11 b/g/n. Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack.
  • Integrated TR switch, balun, LNA, power amplifier and matching network. Integrated PLLs, regulators, DCXO and power management units.
  • Integrated low power 32-bit CPU could be used as application processor.
  • The USB-to-serial converter means you don't need any peripheral components to program the chip. Simply plug in a micro USB cable..
Check Stock

Bingfu Boat Ship Marine GPS Navigation External Antenna (5m Cable) Compatible with Garmin GPSMAP MAP NavTalk StreetPilot Furuno Matsutec Trimble GPS Modem Receiver Unit Transducer Fishfinder Sounder

  • Compatible with Boat Ship Marine GPS Navigation System Unit Modem Receiver Transducer Explorer Fishfinder Sounder.
  • Accessoried Adapter: TNC Male to BNC Female Connector Adapter.
  • Package List: 1 x Antenna, 1 x Connector Adapter.
Check Stock

Winegard LNA-100 Boost TV Antenna Amplifier, HDTV Signal Booster, HD Digital VHF UHF Amplifier, Indoor HDTV Ultra Low Noise Amp (USB Power Supply)

  • HDTV Antenna Amplifier - The Winegard Boost TV signal booster enhances any indoor non- amplified antenna, delivering more range and available channels. Delivers a crystal clear signal, watch more channels than with an antenna alone..
  • Amplified Clear Circuit Technology - Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation. The Boost preamplifier enhances any non-amplified antenna..
  • In The Box - Includes Winegard Boost LNA-100 indoor digital TV antenna amplifier, energy saving USB power cable with LED power indicator, 110V adapter and printed documentation.Gain (typical): 20 dB,Power: +5V.
  • Winegard Boost Warranty and Support - The LNA-100 digital antenna booster comes with a 1 year parts and labor limited warranty and complimentary telephone and email support..
  • Winegard TV Antenna Experts - Leading US designer and manufacturer of quality TV antenna and signal equipment since 1954. Designed and built in the U.S.A..
Check Stock

Winegard LNA-100 Boost TV Antenna Amplifier, HDTV Signal Booster, HD Digital VHF UHF Amplifier, Indoor HDTV Ultra Low Noise Amp (USB Power Supply) - USA (Renewed)

  • HDTV Antenna Amplifier - The Winegard Boost TV signal booster enhances any indoor non- amplified antenna, delivering more range and available channels. Delivers a crystal clear signal, watch more channels than with an antenna alone..
  • Amplified Clear Circuit Technology - Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation. The Boost preamplifier enhances any non-amplified antenna..
  • In The Box - Includes Winegard Boost LNA-100 indoor digital TV antenna amplifier, energy saving USB power cable with LED power indicator, 110V adapter and printed documentation.Gain (typical): 20 dB,Power: +5V.
  • Winegard Boost Warranty and Support - The LNA-100 digital antenna booster comes with a 1 year parts and labor limited warranty and complimentary telephone and email support..
  • Winegard TV Antenna Experts - Leading US designer and manufacturer of quality TV antenna and signal equipment since 1954. Designed and built in the U.S.A..
Check Stock