Reviews Liquid Flow Control Valves

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve

  • MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
  • TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
  • Double-seal system allows flow to go in either direction.
  • WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
  • EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
  • CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock

Moen U362CIS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Moen U232CIS M-CORE 3-Series Mixing 2 or 3 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

Moen U362XS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with Crimp Ring PEX Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Moen UTS2611 Doux Collection M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Chrome

  • VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

Moen UT3611ORB Voss Collection M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Oil-Rubbed Bronze

  • UNIQUE FINISH: Oil-Rubbed Bronze finish delivers a rich, dark brown, Old World finish with striking light and dark accents.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

Moen UTS2912EPBG Flara M-CORE 2-Series 1-Handle Shower Trim Kit, Valve Required, Brushed Gold

  • ...h, dark brown, Old World finish with striking light and dark accents.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
Check Stock

Moen UT3290BN Align M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Brushed Nickel

  • ...hed Nickel finish provides a lightly brushed warm-grey metallic look.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
Check Stock

Lu-Hawk R134A Self-Sealing, and Single Puncture Can Taps, with Valve Core Removal Tool.

  • Works for all R-134A cans. Doesn't matter if it is the new EPA-required self-sealing freon can or the old-style single puncture bottle we got you covered..
  • Both our refrigerant can tap valves are made from brass, yes even the silver-colored self-sealing. The output is 1/4" flare, with a NEW 1/2" ACME adapter. We listen to what you the customer wants and have fixed the hose size issue with a free adapter..
  • Our valve core removal tool works on all Schrader valves.
  • from a compact car to a full-size Truck..
  • When selecting tools we look at quality, and function only. That is why we supply brass valves instead of aluminum. If you're not 100% satisfied please return it to Amazon. We buy tools we use on our vehicle, if it isn't to your standard let us know..
  • Only add R-134a to the low side (blue). "R134A flow" depends on the pressure differential between the can and the system. The can "cools" and the can pressure drops as you add it to the system slowing the flow of gas. Some people flip the can over and add liquid to speed things up, but if the liquid doesn't disperse before the compressor it can destroy the compressor. The slowing is not due to the valve or any other tool, it is just how it works..
Check Stock

1\ HEAVY DUTY HIGH FLOW IN-LINE COMPRESSED AIR PRESSURE REGULATOR 180 CFM

  • CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately).
  • Valves have dual-scale readings in psi and kg/cm.
  • Needle valve flow control provides precise flow adjustment and measurement.
  • Includes flow regulator, needle valve, electronic solenoid, and bubble counter.
  • NOTE:Kindly refer to the Regulator Set Up Procedure provided as a PDF manual in the product description section.
Check Stock

Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool

  • Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
  • Smallest size also works on automatic adjusting air suspension systems for automobiles.
  • Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
  • Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
  • Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
  • Set comes with five popular sizes: 1/8"-5/32.
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock