Reviews Lipo Jst Connector
XT30 XT60 Balance Board RC Lipo Battery Parallel Charging Board,2 in 1 PG Parallel Charging Plate XT30 XT60 Plug Supports 4 Packs for 2S-6S Lipo Battery
- 2 in 1 lipo battery parallel charging board lipo charger,supporting XT60 connector and XT30 conector lipo battery.It is just a parallel charging board, not a diret charger, need to connect with a charger which support the balance port ( JST connector).
- Thicken PCB copper foil, allow security using 35A charging current..
- This lipo balance charging board supports up to four packs of the same type, same cells 2S-6S lipo battery pack,such as 2S lipo battery,3S lipo battery ,4S lipo battery,5S lipo battery,6S lipo battery..
- Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.
- Output Connector:XT30 connector /XT60 connector,support xt30 and xt60 lipo batteries..
Check StockBlomiky 2 Pack 7.4V 1200mAH Lipo Battery Pack with JST Plug and Charger for UDIRC UD1601 UD1602 Pro Fisca Cheewing 1/16 Scale 20MPH 30KM/H RC Truck X6 Battery and USB 2
- Discharge plug:Red JST connector, plug end cross-section size:5.55*3.0mm/0.218*0.13inch. 7.4V 1200mAh lipo rechargeable battery fit for Huina 1592....
- Battery dimensions:: L66.6*W30*H15.3mm/2.62*1.18*0.6inch . Weight:63G. 7.4V 1200mAh Lipo rechargeable battery fit for Laegendary 1:14 scale 22 Channel....
- 7.4V 1200mAh JST Lipo rechargeable battery fit for YiZhan X6 RC Quadcopter Drone Aircfaft, 7.4V 1200mAh JST battery replaced for Cheerwing 1:16 2.4Ghz....
- 7.4V 1200mAh JST lipo battery with JST plug fit for WLtoys V262 V333 V353B V666 Q212,JJRC H40WH H40 H26 H26HW,MJX X101 X102 RC Quadcopter Drone,UDI....
- 7.4V 2S USB charging cable have IC protection circuit and Indicator light. green light is blink when charged, green light stop blink after full....
Check StockApex RC Products JST-XH 2-6S Lipo Battery Charger Balance Board - 2 Pack #1390
- Works With 2S-6S Batteries With A JST-XH Balance Plug.
- JST-XH Connector Is On Most Lipo Batteries.
Check StockHYPERION 1300 MAH 2S 7.6V HV LIPOLY Pack for FATSHARK/HEADPLAY Googles
- This 6x JST to 4mm Banana cable makes it possible to charge up to 6 batteries with JST connectors together in parallel..
- Compatible with RC Micro helicopters Airplane Car Lipo Battery Charging..
- Solid and secure connection,light weight and compact with excellent performance.
Check StockRuiLing 2pcs 15cm JST-XH 4S LiPo Balance Power Cable Connector 22AWG Extended Charging Wire Male Female Plug for RC Drone FPV Quadcopter Rechargeable Lipo Battery Charger DIY
- Type: 2 x JST-XH 4S LiPo Battery Balance Charging Extension Wire, ideal for all types of R/C (Cars, Boats, Planes).
- Connector: With balance charger male and female JST-XH plug, wrks with 4S batteries with a JST-XH balance plug..
- Material: Made of 22AWG soft SR wire, 15cm length, shrink tube protected female end, fine workmanship, suitable for large current charging, durable to....
- Convenient & Practical: This Extension Lead is for connecting the Lipo Balance Lead to your charger, making it much easier to connect because the....
- Wide Use: Apply to Most Lipo Battery Chargers, such as: Dualsky, Align, hexTronik, Flightmax, Zippy, Rhino and many other brands of lipo packs..
Check Stock2S 1000mAh 7.4V Lipo Battery 2Pcs SCX24 Batteries with PH2.0 & JST Plug 35C Lithium Battery with 2 in 1 USB Charger for WLtoys A949 A959 A969 A979 Most 1/10 1/16 1/18 1/24 RC Cars
- JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys....
- Convenient charger: 2-in-1 USB Balance Charger with XH-3P Connector can charge 2pcs 2S batteries at once and the USB interface of the charging cable....
- AB clip special design: AB clips in 2S RC battery's and charger's XH-3pin connector, which can enhance battery durability, protect the battery....
- 300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of....
- Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can....
Check StockTurnigy Quad 4x6S Lithium Polymer Charger 400W DC Only
- T-Power - Made with the Brand-new Input Voltage Range: AC 100V - 240V / OUTPUT : 12V 12AMP ( DC 11.0~18.0V 10A compatible ) item come w/ barrel connector and xt60 connector ).
- Compatible Model: Turnigy Accucel-6 80W 10A Balancer Charger LiPo LiFe NiMh NiCd JST-XH.
- Hitec HRC44177 , RCD 44177 X1 Touch 55W AC/DC Multi-Chemistry Touch Screen Battery Charger / Replacement for SKYRC D100 employs LiFe LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger.
- Ultra Power UP120AC Duo LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger / HOBBYMATE Duo Lipo Charger Dual Charge Port, Fast Lipo Charger, AC/DC Balance Charger 12A 120-240W.
- T-Power - manufactured with the highest quality materials and include multiple smart features safeguarding against IV - incorrect voltage, SC - short circuit, IO - internal overheating. CE/FCC/RoHS certified.
Check Stock7.4V Lipo Battery 2S 1000mAh: 35C Battery with PH2.0 & JST Plug A xial SCX24 Lithium Batteries 2 Pack Rechargeable Batteries for WL Toys RC Car Most 1/10 1/16 1/18 1/24 Scale Racing Trucks
- JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys A949 A959 A969 A979 K929, Ex ceed RC cars and other RC vehicles. Lipo battery with PH2.0 plug can be used for A xial SCX24 most 1/10 1/16 1/18 1/24 racing car RC trucks.
- Wide application: This battery can fit most 2S JST or PH2.0 plug remote control devices. In addition to fit for RC cars, this battery can not only power drones or RC Boats but also be used in the transmitter of them.
- AB clip special design: AB clips in 2S RC battery's XH-3pin charging connector, which can enhance battery durability, protect the battery charging cable and help you plug and unplug the charging cable quickly and easily.
- 300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of high-efficiency, safe and fast charging and discharging efficiency.
- Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can reduce the weight of your drone or RC car and provide huge power support.
Check StockGens ace 11.1V 2200mAh 3S 25C LiPo Battery Pack with Deans Plug for RC Heli Airplane Car Boat Truck
- Gens ace Professional LiPo Battery, best 3s 11.1v lipo for your rc model.
- Quickly Recharged, Long Cycle Life (150 times minimum), up to 200Wh/kg energy density.
- Connector, Deans Plug, Balancer Connector, JST-XHR.
- Applications: Specially Designed for 800MM Warbirds, EPP 3D plane, small heli, QAV180/210, DJI Phantom Quadcopter, DJI Phantom FC40 Spare, Walkera E22.
- What you get: Gens ace LiPo Battery Pack with Deans Plug & Local after-sales service (located in Dublin, CA).
Check Stock6PCS JST Plug Splitter JST Male Female Y Cable JST Y Parallel Adapter Harness JST to JR Adapter for Traxxas TRX-4 RC Car Crawler Truck Cooling Fan ESC Battery Motor
- Package includes 6PCS Cable. 1PCS Male JST to Female JR (Futaba) Cable, 1PCS Female JST to Male JR Cable,1 Male to 2 Female Y Harness, 1 Male to 3 Female Y Harness, 1 Female to 2 Female Y Harness, 1 Female to 3 Female Y Harness..
- They are special for Traxxxas car truck crawler and HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car, mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection..
- The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch..
- The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time..
- Cable length: 15cm/5.9inch for splitter cable, 10cm/3.9inch for JST to JR cable.
Check StockBattery Packs Lithium Ion Polymer Battery 3.7V 1200mAh (1 piece)
- Premium LiPo Rechargeable Battery - Our lithium polymer battery, known as 'lipo' or 'lipoly' battery, is thin, light, and powerful. It’s rechargeable hundreds of times, making it an excellent choice for those who need a reliable power source..
- Versatile Polymer Battery - This polymer rechargeable battery is an ideal battery replacement for the Ecologic Mart reading light clip. It is also a high-capacity power source for various devices like MP3s, MP4s, PSPs, and GPS trackers..
- Light and Compact - Bring an extra lipo rechargeable battery to keep your devices charged up. Since it’s lightweight and portable, you can easily place the 3.7 volt battery in your pouch or handbag..
- Don't Mistake it for PH2.0 - Note that this polymer battery is NOT PH2.0. If the lithium polymer battery connector you are looking for is 2.0, you need to cut the wires that it currently has and replace them with another battery connector..
- Accurate Specifications - Our lithium ion battery 3.7v 1200mah is known for its high energy density with the Red(+) and Black(-) labels. The 1200mah lipo battery also has an approximately 4.5 Wh battery capacity. It comes with a Micro JST 1.25mm 2Pin Male Connector with a 1.25 mm distance between two wires..
Check StockTenergy TB6-B Balance Charger and Discharger and Lipo Bag for Charging, 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-Po Battery Packs w/ Tamiya/JST/EC3/HiTec/Deans
- Bundle includes Tenergy TB6-B hobby battery charger with Tamiya/JST/EC3/HiTec/Deans connector and Tenergy's large lipo zipper bag measuring 8.5x6.5x5.7 inches.
- Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
- With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
- Tenergy's large LiPo bag reduces fire hazard when recharging or storing multiple airsoft Lithium-Polymer battery packs..
- Charging hole with velcro seal design reduces airflow and oxygen helping to smother flames before it can get out of control while recharging a LiPO battery pack.
Check StockShareGoo 4PCS JST Plug Splitter,JST Male Female Y Cable,JST Y Parallel Adapter Splitter Harness for Traxxas TRX-4 1/10 RC Car Crawler ESC Battery Motor Cooling Fan,15CM/5.9"
- Package includes 4PCS JST Y Cable.These are 1 Male to 2 Female Y Harness,1 Male to 3 Female Y Harness,1 Female to 2 Female Y Harness,1 Female to 3 Female Y Harness.They are special for Traxxxas car,alao can used for HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car..
- The Male to Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch..
- The Female to Female Y Harness are used for TRX-4 ESC,it alows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time..
- Also can be used on most mini RC helicopter and indoor 3D plane,great for small Lipo and NiMh connection..
Check Stock