Yeahmart Linear Rail 2 Pcs 8mm x 400mm Cylinder Liner Rail Linear Shaft Optical Axis + 4 Pcs Rod Rail Shaft Support SK8 + 2Pcs Linear Motion Ball Bearing Slide Bushing SCS8UU
- Dimension: 8x400mm linear rail motion shaft guide set.
- The linear rail made of good quality steel and aluminum alloy.
- It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
- The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
- Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check StockClarostat 100K OHM MODPOT Linear Taper Potentiometer 1W 1 Watt 10%
- .25″ “Flat D” shaft diameter, .35″ (9.5mm) length to allow for a knob if desired.
- Shaft Length: 22mm (7/8″), Bushing Length:12.5mm (0.50″), Total Shaft Length 1.50″.
- Body is .63″ square, Mounts in a .375″ hole.
Check StockSlocable Both Ends Tapped Precision Linear Shaft Stainless Steel 8mmX200mm
- High precision: With high-precision dimensional tolerance and geometric tolerance, it is widely used in various precision equipment, so you can use it with confidence..
- Wide range of applications: Various chasing schemes can be selected to meet different use environments..
- Wear-resistant: Usually used in conjunction with linear bearing products, it has excellent linear guiding function. Compared with the general shaft and bushing structure, even if it is high-speed reciprocating motion, it will not have great wear..
- Rust prevention: hard chromium plated surface treatment can be selected, which not only has excellent rust prevention performance, but also the coating hardness has reached hv750. It will not be easily worn when matched with high hardness workpieces..
- Good material: Bearing steel with excellent wear resistance (equivalent to SUJ2 and SUS440C) or equivalent high hardness corrosion-resistant steel are used for high-frequency quenching treatment to enhance wear resistance and maintain the original toughness..
Check Stock4PCS SBR16UU SBR Linear Ball Bearing Slide Block for SBR16 Linear Rail Guide
- Model: LM8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
- Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stockuxcell LMK20UU Square Flange Linear Ball Bearings, 20mm Bore Dia, 32mm OD, 42mm Length(Pack of 2)
- Model: LMK20UU (Nominal Shaft Diamter (dr): 20mm, Outer Diameter (D): 32mm, Total Length (L): 42mm).
- Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stockuxcell LMK10UU Square Flange Linear Ball Bearings, 10mm Bore Dia, 19mm OD, 29mm Length(Pack of 2)
- Model: LMK10UU (Nominal Shaft Diamter (dr): 10mm, Outer Diameter (D): 19mm, Total Length (L): 29mm).
- Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stockuxcell LM16UU Round Flange Linear Ball Bearings, 16mm Bore Dia, 28mm OD, 37mm Length(Pack of 2)
- Model: LM16UU (Nominal Shaft Diamter (dr): 16mm, Outer Diameter (D): 28mm, Total Length (L): 37mm).
- Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stockuxcell LMK6UU Extra Long Square Flange Linear Ball Bearings, 6mm Bore Dia, 12mm OD, 35mm Length(Pack of 2)
- Model: LMK6UU (Nominal Shaft Diamter (dr): 6mm, Outer Diameter (D): 12mm, Total Length (L): 35mm).
- Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check StockRuimou 12Pcs LM8UU Solid Polymer Bearing 8MM Linear Bearings(8X16X25MM) for Mendel 3D Printer Replace Parts
- Model: LMK8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
- Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check StockBall Bearing, Linear Ball Bearing 10pcs LM8UU 8mm Linear Motion Ball Bearing Bushing for 8mm Rod 3D Printer CNC Parts
- Model: LMK10UU (Nominal Shaft Diamter (dr): 10mm, Outer Diameter (D): 19mm, Total Length (L): 55mm).
- Square Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check StockQWORK 2Pcs SCS12LUU Aluminum Linear Motion Ball Bearing Slide Unit Bushing, Type CNC Extra Long Linear Roller Bearing Slide Block, 12mm Bore Dia
- Model: LM8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
- Linear Motion Ball Bearing Bushing Sealed on Both Side.
- Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check StockMetal Drive Toggle and Clevis Mount Compatible with Lazy Boy/La Z Boy/La-Z-Boy/LazyBoy Power Recliners, Equipped with 4 Upgraded Plastic Split Bushings (Including Spare Parts x 2), Upgraded Aluminum
- 【Package includes】Metal drive toggle bracket x 1, metal motor end clevis mount toggle x 1, plastic split bushing x 4(including spare parts x 2), installation manual x 1..
- 【Perfect Fit 】Fits All La-Z-Boy Power Rocker Recliners.This product perfectly replaces the plastic kits in La-Z-Boy Power Rocker Recliners, adding durability and enhancing the user experience..
- 【Easy to Install 】Precise size, manufactured with the highest level of finish. Detailed installation instructions are included with the product. It should be noted that there are 4 plastic bushings, 2 of which are spare parts, please keep them properly. Also, please remove the old damaged plastic parts before installation.
- it is not necessary to remove the square drive rod.
- the toggle bracket is mounted on the spare shaft, not on the collet at the end of the linear motor..
- 【Product Advantages】Adopt high-quality aluminum alloy thickened material, finely polished, wear-resistant, corrosion-resistant, and durable. The matching plastic bushing twill opening is more suitable for original accessories, and it can also be ground and adjusted according to needs..
- 【Quality after sale】For any quality problem, resend a new or unconditional full refund.100% money back guarantee - For whate....
Check StockOEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing
- EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
- WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
- The OEM Tools bushing driver set includes 20 different size cups for versatile use.
- ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
- Don’t have to remove components from vehicles with this bushing tools set.
- ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
- Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
- MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
- Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock