Reviews Light Truss

GRIFFIN - Crank Up Triangle Light Truss System | DJ Booth Trussing Stand Kit for Light Cans & Speakers | Pro Audio Lighting Stage Platform Hardware Package | Portable Music Equipment Mount Gear Holder

  • KEEP YOUR STAGE GEAR SAFE. A DJ STAND WITH STAGE TRUSS: A DJ equipment package with stage lighting stands which is made of medium-duty steel with a sturdy, steel cable gear system that will easily lift your heavy light cans or PA speakers. Designed with rubber rest pads on the feet to provide sufficient support and stability. This is an extremely durable and long-lasting trussing system, perfect for all your stage lighting needs..
  • GIVE YOUR DJ STAGE LIGHTING RIG THE PLACE IT DESERVES: Accommodate any dj booth or dj system with this stage light truss dj package. Hoist your light cans up in the air with this crank up triangle truss stand! With two smooth crank mechanisms (one on each side) and three triangle truss spans, this lighting truss system can reach a total span of 177 inches wide, allowing you to hang up to 200 pounds of equipment. The ideal DJ lighting stand for your DJ light bar and stage equipment!.
  • ADJUST TO DIFFERENT HEIGHTS: Featuring two interlocking poles that allow you to adjust the height from 60" to 114" according to your needs, this trussing stand offers unmatched versatility and convenience. Included in the package you will also find 12 metal C-clamps (each rated to lift 44 pounds weight load), so you can mount your lights and other....
Check Stock

GRIFFIN T Bar Adapters for Lighting Truss Stands 2 | Triangle or Square Trussing Bracket Mounts for Light Cans & DJ Booth Kit | Pro-Audio Effects Stage Hardware Holder | Music Equipment Gear Platform

  • RAISE YOUR TRUSSES & LIGHTS ABOVE YOUR AUDIENCE: With these T-adapters and your stands, you can get your lighting truss up high with confidence,....
  • LIFT YOUR HEAVIEST DJ SYSTEM EQUIPMENT WITH SAFETY: Accommodate any DJ booth or DJ system with this stage light truss DJ package. Boasting heavy-duty,....
  • ADJUST THE WIDTH OF EACH ADAPTER TO FIT ALL DIFFERENT SIZES OF TRUSSES: There’s no need to worry if this will fit your truss. These truss T-Adapters....
  • DJ TRUSS BRACKETS FITS ANY STANDARD TOP SUPPORT POLE 35MM TO 38MM: Fits any standard Top support pole: (35mm-38mm) or 1 3/8" Specifications:....
  • 1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and....
Check Stock

Crank Up Light Stands 2 Pack Stage Lighting Truss System by GRIFFIN | Portable Speaker Tripod Platform Rig | Adjustable Trussing DJ Booth Kit | T Bar Mount for Can Lights | Music Equipment Package

  • RAISE YOUR LIGHTS & SPEAKERS | A DJ STAND FOR STAGE TRUSS: Featuring Top quality stage lighting crank up stands, this DJ equipment package with stage....
  • LIFT YOUR HEAVIEST EQUIPMENT WITH SAFETY WITH 2 T BAR LIGHT STANDS: Accommodate any dj booth or dj system with this stage light truss dj package.....
  • ADJUST TO YOUR PREFERRED HEIGHT: The poles are thoughtfully designed to interlock in three places, so you can easily adjust the height from 68" to 11....
  • TRANSPORT & SET UP YOUR DJ TRUSS LIGHTING STAND IN A WHIZ: Don’t let their sturdy build fool you. Each light trussing stand weighs only 35 pounds,....
  • 1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and....
Check Stock

Light Trussing Stands by GRIFFIN | T Adapter DJ Booth Kit & Truss System for Lighting Cans & Speakers | Pro-Audio Stage Platform Hardware Mounting Package | PA Equipment Gear Holder | Live Music Gigs

  • KEEP YOUR STAGE GEAR SAFE. A DJ STAND WITH STAGE TRUSS: DJ equipment package with stage lighting stands which is made of medium-duty steel with a....
  • GIVE YOUR DJ STAGE LIGHTING RIG THE PLACE IT DESERVES: Accommodate any DJ booth or DJ system with this stage light truss dj package. Hoist your light....
  • ADJUST TO DIFFERENT HEIGHTS: Featuring two interlocking poles that allow you to adjust the height from 60" to 114" according to your needs, this....
  • FOLD UP AND GO! PACK UP YOUR DJ TRUSS LIGHTING STAND IN A BREEZE: With retractable legs that fold up in seconds to allow you to pack up your DJ light....
  • 1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and....
Check Stock

DJ Booth Tabletop With 8FT Lighting Truss Stand Package by FAT TOAD | Foldable Panel Portable Stage Platform Facade White Scrim Cover | Video Light Projector Display Workstation For Sound System Event

  • STAGE PLATFORM METAL FRAME CONSTRUCTION WITH DJ BOOTH TABLE TOP: The heavy-duty square steel frame tubing is light enough for transport and heavy duty enough to hold your gear. The removable solid steel tabletop shelf easily hangs right on the frame and has a hole in 2 corners to run your wires through. The top panels are made in a steel honeycomb design and can easily be used to mount a lightweight TV or logo sign. These panels also angle in to help protect your equipment..
  • DJ TABLE STAND WITH 8FT X 9FT DJ TRUSS I-BEAM SYSTEM: The 8-foot-wide I-beam light truss system is built into the frame. The truss has 16 hanging points (12 bolts and wingnuts included) and is easily adjusted by one person from 5 to 9 feet tall. There are no tripod legs, which saves space and both the truss and mounting poles are easily removed when it’s time to pack up. It’s durable and will hold up to 60lbs of lights, fog machines and lasers..
  • DJ TABLE COVER WITH WHITE COVER DISPLAY SCRIM: While other models require you to use a bulky blanket as a SCRIM, ours model utilizes four separate panels that are easily attached with Velcro. This results in a much cleaner and less wrinkled look. (Pl....
Check Stock

Lanikai OA-B Oak Ukulele - Baritone

  • A Lanikai Oak Baritone ukulele utilizes many features such as a truss rod for easy action adjustments, a wider nut for player comfort, select wood, open back tuners, NuBone XB nut and saddle, DAddario strings, satin finish, a padded gig bag and a Limited Lifetime Warranty. These ukes have a bright crisp tone with comfortable playability and striking looks..
  • Oak laminate top, back and sides in Satin finish.
  • Truss Rod for easy neck adjustments that only a few baritone ukuleles offer.
  • Chrome open back tuners for tuning accuracy and keeping the headstock light for player comfort.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

MIECOO 17PCS Guitar Truss Rod Allen Wrench Set, Includes 7mm & 8mm Truss Rod Hex Box Wrenches and 4mm, 5mm, 6mm Lengthened Ball End Truss Rod Wrenches Repair Tool and Guitar Spanner Wrench

  • 【GUITAR REPAIR TOOL KIT INCLUDES】9 x Black Allen Wrench.
  • 2 x Black Ball End Truss Rod Wrench (4mm & 5mm).
  • 3 x Silver Lengthened Hex Wrench (4mm & 5mm & 6mm).
  • 2 x Silver Pocket Truss Rod Hex Box Wrench (7mm & 8mm).
  • 1 x Portable Storage Bag. Suitable for guitar, bass, mandolin, banjo and more. Perfect gift idea for guitar lovers, beginners, luthiers..
  • 【7MM & 8MM SILVER POCKET TRUSS ROD HEX BOX WRENCHES】made of high quality steel & durable. Fine workmanship, smooth surface with high glossiness. 7mm pocket truss rod hex box wrench fits for Taylor Guitar, and 8mm wrench fits for Gibson Guitar. Long handle length allows easier access to truss rod cavity and easily tighten or loosen the truss rod of your guitar..
  • 【3PCS SILVER LENGTHENED WRENCHES】set of 3 including different size: 4.0mm, 5.0mm, 6.0mm. Reach deep areas easily by using the ball end and apply higher force effortlessly by using the short end. Used to drive bolts and screws with a hexagonal head. Use for locking hexagonal screws, adjusting guitar neck truss rod efficiently, etc..
  • 【GUITAR MULTI SPANNER WRENCH】made of stainless steel & durable. Used to tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup sw....
Check Stock

3x 5ft Lighting Triangle Bolted Truss 15 span Stand Universal DJ Metal 5 NEW

  • MEDIUM DUTY TRIANGLE TRUSS LIGHTING 15' span Adjustable span from 5' to 10' and 15 feet wide!.
  • set of (3x) 57" Triangle Bolted Truss. This medium duty triangle truss sections create nearly 15ft span..
  • You can mount up to 200 lbs evenly. Truss pipes are 1.5" in diameter. Truss sections are 10 inches in overall width..
  • You can create a 57" / 5FT span all the way up to a 171" 15Ft span.
  • This listing is just for 3x 5ft Trussing and stands are not included.
Check Stock

Coleman Light and Fast 10x10 Eaved Shelter Canopy Gazebo -Middle Truss Bars 33 1/2\ Replacement Parts

  • MEASURE YOUR TRUSS BAR BEFORE ORDERING TO ENSURE YOU ORDER THE CORRECT ITEM!.
  • New Replacement Part - MIDDLE Truss Bar Only - 2 Bars (This will NOT fit the side section!).
  • For the Coleman Light and Fast 10x10 Eaved Straight Leg Instant Sun Shelter Canopy.
  • Dimensions: 33 1/2" long. NOTE: Holes in bar are not the same distance from end on the sides. Side bars have different spacing and are a different listing..
Check Stock

Disco Band

  • Mini moving head light DJ light with remote control/upgrade version/bright beam effect.
  • 5 control modes: DMX512, master and slave, sound activated and automatic, wireless remote control.
  • Built-in RGBW 4 colors, 4In1 beam effect LED lamp beads 10W.
  • Convenient installation: can be hung on a truss, wall or ground, very suitable for bars, clubs, DJs, performances, family gatherings, light shows, etc..
  • Products include: moving head light x 1, cable x 1, operation manual x 1, bracket x 1 and screws x 2..
Check Stock