Reviews Lifts Machinery

Spray Nine 22732 Grez-Off Heavy Duty Degreaser, 32 oz., Pack of 1

  • SHOP GRADE SOLVENT FORMULA: Dissolves heavy grease, oil & tar.
  • POWERFUL SOLVENT: Removes adhesives & paints.
  • FOR USE ON: Heavy machinery, engine parts, tools, shop floors, work surfaces, metal & more.
  • This shop grade formula is available in many convenient sizes and an aerosol that can easily get into small spaces & crevices.
  • Lifts deep oil stains from concrete & asphalt.
Check Stock

Performance Tool W759 Roll Pin Punch Set to Remove Pins with Knurled Steel Handles for Good Grip 8 inches 5-pc

  • 8 INCHES LONG: Helps reach deeply set pins in obstructed areas.
  • 5 PIECES: Variety of sizes allows you to use on all kinds of machinery around the shop or garage.
  • PIN SIZES: 1/8", 3/16", 1/4", 5/16", and 3/8".
  • KNURLED STEEL HANDLES: Offers sure grip and long life.
  • LIFT RANGE: Lifts vehicles from 6 11/16" to 13".
Check Stock

Conquest 3/4 x 7 Type 304 Stainless Steel Wedge Anchors Box of 10 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 3/4" | Length: 7" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 10 Pieces | Material: 18-8 (Type 304) Stainless Steel.
  • [CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments.
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Conquest 5/8 x 6 Type 304 Stainless Steel Wedge Anchors Box of 25 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 5/8" | Length: 6" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 25 Pieces | Material: 18-8 (Type 304) Stainless Steel.
  • [CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments.
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Conquest 3/8 x 3-3/4 Type 316 Stainless Steel Wedge Anchors Box of 50 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 3/8" | Length: 3-3/4" | Thread Type: Coarse (standard) | Thread Length: 2-7/16" | Quantity: 50 Pieces | Material: Type 316 Stainless Steel.
  • [CORROSION RESISTANT] Highest grade 100% 316 Stainless Steel provides highest form of corrosion resistance. Ideal for any environment (including marine and saltwater applications).
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Stark 50-Ton Air & Hydraulic Bottle Jack with Handle Bottle Jack with Built-In Wheels for Maneuverability, Red

  • Ideal Jack - Great for automotive, van, farm, industrial, truck repair, moving machinery, construction work and heavy equipment.
  • Versatile Uses - Safely and reliably lifts most vehicles with a minimum lift of 10-1/2 inches high to a maximum of 17 inches high.
  • Easy to Transport - With Built-in Wheel for easy maneuverability around the shop.
  • Safe and Reliable Lifting - Heavy duty steel construction allows jack to be used multiple times without wear and tear and can handle heavy duty loads with ease..
  • Easy to Connect - Comes equipped with both hose & connector to quickly connect to air compressor for lifting operations with ease.
Check Stock

Lever Chain Hoist 2200LBS 10FT, 1T 3M Lever Chain Hoist 1 ton Commercial Portable Hooks for Building Garages Warehouse Automotive Machinery【1T\\/3m】

  • ...ft.The ratchet lever chain hoist is equipped with a handle that has a non-slip rubber overlay with a unique texture which is easy to operate.
  • 【Wide Application Field】The lever chain hoist is mainly used in factories, mines, construction sites, wharves, docks, warehouses and other places for the installation of machinery, lifting goods, raising machinery for maintenance, and especially for open-air and unpowered operations.
  • It’s also a good birthday gift choice for your gearhead husband.
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Centerforce N1747 Centerforce ® Accessories, Throw Out Bearing / Clutch Release Bearing \88 Buick Century 2.8L ( 173 ci )\

  • Mainly used for textile machinery, printing machinery, automotive industry, household appliances and more..
  • Enough room for grease to store with a longer relubrication interval..
  • High quality bearing steel, durable with high hardness..
  • Hard bearing steel with strong bearing capacity, not easy to deform..
  • Ensure that the clutch can be smoothly engaged, soft to disengage, reduce wear, and extend the life of the clutch and the entire driveline..
Check Stock

Adjustable Universal Mobile Base Bora Portamate PM-1000. Move Your Heavy Tools and Equipment around Your Shop with Ease and Stability

  • 400 LB CAPACITY: The Bora Portamate Mobile Base PM-1000 has a weight capacity at 400lbs. (181 kg). It’s universal strength makes it ideal to move square or rectangle equipment and heavy tools around your shop or garage.
  • MOUNT & MOVE EASILY: Make large machinery such as table saws and bandsaws, woodworking equipment, power tools, planers, jointers, shapers, and spindle sanders movable with ease with this strong base.
  • ADJUSTABLE SIZE: Adjusts from 12 x 12 inches to 32 x 32 inches square or up to 17 x 48 inches rectangle. The stand is adjustable in 1-inch increments to fit a wide variety of machines.
  • EASY GLIDE + LOCKING LEVERS: The easy to use foot-operated locking levers lock the steel mobile base firmly into place. When it’s time to get moving, the 3 inch hard rubber wheels provide a smooth glide.
  • LOW PROFILE: This mobile base lifts your machine height by less than 1 inch, adding only a small increase to your working height while allowing your equipment to be completely mobile and moved around as needed.
Check Stock

36774321 Drive Coupler for Ingersoll Rand Doosan Portable Air Compressor Replacement Part Flexible Coupling Slotted Disc

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Belimo | Z3075Q-J+CQB24-3 | ZoneTight | 0.75\ | 3 Way | 5.9 Cv | w/ Non-Spg | 24V | On/Off/Floating

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock