Reviews Lift Kit For 4runner

Bilstein 24-196499 B8 5100 Series Set of 2 Front Monotube Replacement Gas Charged Height Adjustable Shock Absorbers for 10-14 Toyota Fj Cruiser 0-2.5in Lift

  • compatible with | | 4Runner: > 2010-2017 4Runner with 0" to 2 1/2" of Lift, including Limited, SR5, and Trail 2017 4Runner TRD Off-Road with 0" to 2 1/2" of Lift | FJ Cruiser: > 2010-2014 FJ Cruiser Base with 0" to 2 1/2" of Lift.
  • Collapsed Length (IN): 17.58 Extended Length (IN): 22.48.
  • Body Design: 46mm ID Snap Ring Grooved Body (Coilover).
Check Stock

Bilstein B8 5100 Series Set of 4 Monotube Replacement Gas Charged Shock Absorbers for 10-15 Toyota 4Runner 4WD 0-2.5in Front and 0-2in Rear Lift

  • compatible with | | 4Runner: > 2010-2017 4Runner with 0" to 2 1/2" of Lift, including Limited, SR5, and Trail 2017 4Runner TRD Off-Road with 0" to 2 1/2" of Lift | FJ Cruiser: > 2010-2014 FJ Cruiser Base with 0" to 2 1/2" of Lift.
  • Front: Collapsed Length: 17.58" (446.50mm) Extended Length: 22.48" (571.10mm).
  • Rear: Collapsed Length: 14.91" (378.71mm) Extended Length: 23.50" (596.90mm).
  • Bilstein 5100 Series Ride Height Adjustable Shock Absorbers are designed for front coilover style pickup suspensions > The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving > Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0"-2.5" of front end lift, depending on application > Provides increased wheel travel and improved handling.
Check Stock

Rear Gate Hatch Latch for Toyota 4Runner 2003-2009 4.0L 4.7L Trunk Latch Assembly Replace Toyota 69110-35090 69110-35062 69110-35060 Tailgate Lock Latch Actuator Liftgate Back Door Lock Motor & Latch

  • REPLACEMENT REAR LIFTGATE DOOR LOCK MOTOR & LATCH - Resolve remote open problem and help to restore your Toyota 4Runner's tailgate lock to proper....
  • FITS THE FOLLOWING VEHICLES - For 2003 Toyota 4Runner Rear Gate Latch, 2004 Toyota 4Runner Rear Gate Latch, 2005 Toyota 4Runner Rear Gate Latch, 2006....
  • REPLACES PART # - 69110-35060, 69110-35062, 69110-35090, 6911035060, 6911035062, 6911035090, TO1911104, AC89740, DLA653.
  • OEM DESIGN, DIRECT FIT - Plug and play. 10mm socket and screw driver is all you need to complete the replacement. Even though this is not a genuine....
  • WHAT YOU'LL GET - 1 x Tailgate Latch Actuator Motor.
  • 69110-35060 4Runner Rear lift gate lock comes backed with our 12-MONTH parts replacement limited....
Check Stock

Unikpas Rear Tailgate Latch Assembly Compatible for Toyota 4Runner 2003-2009 Liftgate Actuator Replace Back Hatch Trunk Lock Latch 69110-35090 69110-35062

  • Compatible for Toyota 4Runner 2003-2009 with 4.0 4.7 Liter Engines. Restore your hatch latch, say goodbye to remote open problems and restore your Toyota 4Runner's back hatch latch to proper operation with our robust plastic housing.
  • Our lock assembly replaces part numbers 69110-35060, 69110-35062, 69110-35090, 6911035060, 6911035062, 6911035090, TO1911104, AC89740, DLA653. It's a direct replacement for a proper fit and easy installation, and meets or exceeds OEM standards.（Please check your vehicle carefully before placing an order).
  • Our lock assembly is designed to be plug-and-play, so all you need is a 10mm socket and screwdriver to complete the replacement. It's not a genuine Toyota 4Runner original equipment rear hatch lock actuator, but it works even better and lasts longer at a much lower price..
  • This 4Runner Rear lift gate lock comes backed with our 12-MONTH parts replacement limited warranty. If the 69110-35090 tailgate lock actuator ever fails on your 2003-2009 Toyota 4Runner Limited, SR5 with 4.0L 4.7L V6 V8 Engine, pl....
Check Stock

Supreme Suspensions - Front Leveling Kit for 2005-2022 Tacoma 2 Front Lift Aircraft Billet Aluminum Strut Spacers 2WD 4WD Black

  • COMPATIBLE WITH 2005 - 2022 Tacoma, 2003 - 2022 4Runner and 2007 - 2015 FJ Cruiser (2WD 4WD). Does NOT Fit Tacoma 5-Lug Models. Does NOT Fit 4Runner....
  • CONTENTS: (2x) Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack..
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that....
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install..
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment....
Check Stock

RockTrix RT113 17 inch Wheel Compatible with 01-21 Toyota Tacoma 6x5.5 6x139.7 Bolt Pattern 17x9 -12mm Offset 106.1mm Bore Matte Black Also fits 02-22 4Runner FJ Cruiser 99-06 Tundra - 1pc

  • Does Not Fit vehicles with manual locking hubs. Compatible with Toyota Trucks SUVs: 2001-2021 Tacoma (6-Lug only), 2002-2022 4Runner, 2007-2014 FJ....
  • SPECIFICATIONS: 6x5.5" (6x139.7) Bolt Pattern. 17x9 Wheel Size. -12 Offset (4.5" Backspacing). 106.1mm Centerbore. Matte Black Color. Valve stems not....
  • IMPORTANT: These wheels are not compatible with Toyota factory lug nuts. Requires conical/cone seat ET Lug Nuts (extended thread) for proper....
  • [NO SPACERS REQUIRED] These 17x9 rims provide aggressive wheel offset, giving up to 2 inches more inner clearance depending on what OEM Toyota Wheels....
  • Fits 30 inch tires. Note: Fender modification, leveling kit, or lift kit may be required for larger tire sizes to be compatible with. These Tacoma....
Check Stock

RockTrix RT110 17 inch Wheel Compatible with 01-21 Toyota Tacoma 6x5.5 6x139.7 Bolt Pattern 17x9 -12mm Offset 106.1mm Bore Matte Black Also fits 02-21 4Runner FJ Cruiser 99-06 Tundra - 1pc

  • Does Not Fit vehicles with manual locking hubs. Compatible with Toyota Trucks SUVs: 2001-2021 Tacoma (6-Lug only), 2002-2022 4Runner, 2007-2014 FJ....
  • SPECIFICATIONS: 6x5.5" (6x139.7) Bolt Pattern. 17x9 Wheel Size. -12 Offset (4.5" Backspacing). 106.1mm Centerbore. Matte Black Color. Valve stems not....
  • IMPORTANT: These wheels are not compatible with Toyota factory lug nuts. Requires conical/cone seat ET Lug Nuts (extended thread) for proper....
  • Our 17x9 Tacoma rims are manufactured with aggressive wheel offset, giving your truck up to 2 inches more inner clearance depending on what OEM Toyota....
  • Fits 30 inch tires. Note: Fender modification, leveling kit, or lift kit may be required for larger tire sizes to be compatible with. These Tacoma....
Check Stock

Start-X Remote Starter Kit for 2020-2022 4Runner Push to Start || 3X Lock to Remote Start || Zero Wire Splicing!

  • ✅ START YOUR 4RUNNER REMOTELY - Use the most complete Plug N Play Remote Starter KIT for Push-To-Start 2020+ 4Runners to cool or warm your vehicle..
  • ✅ START-X – This kit it is brought to you by Start-X, all technical questions should be addressed to highly responsive customer support at Start-X..
  • ✅ PLUG ‘N PLAY T-HARNESS – The revised and unique Start-X T-Harness designed specifically for 4Runner eliminates all wire splicing and tapping. The Start-X T-Harness is clean and neat avoiding the common rat’s nest of wires. There is some disassembly of your vehicle required. Please see the video..
Check Stock

Wheel Spacer Set of 4-6 Lug 1.5 inch 38mm Hub Centric 6x5.5 - Compatible with Toyota Vehicles - 1996-2018 4Runner, 01-07 Sequoia, 2001-18 Tacoma, 00-06 Tundra, FJ Cruiser - 6x139.7mm

  • ...eel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle’s performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Toyota Vehicles – 1996 – 2018 4Runner | 2007 – 2014 FJ Cruiser | 2001 – 2007 Sequoia | 2001 – 2018 Tacoma | 2000 – 2006 Tundra |. The wheel spacers are 1.5 inches thick with 106mm center bore diameter, 12 x 1.5 threaded studs and a 6×139.7mm bolt pattern..
  • Complete Kit – This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits..
  • OEM Fit, Quality, Finish – CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
  • Lifetime Warranty – This 1inch wheel spacer kit manufactued by AA Ignition comes complete with a lifetime warranty. If the part ever b....
Check Stock

Wheel Spacer Set of 4-6 Lug 1.25 inch 32mm Hub Centric 6x5.5 - Compatible with Toyota Vehicles - 1996-2018 4Runner, 01-07 Sequoia, 2001-18 Tacoma, 00-06 Tundra, FJ Cruiser - 6x139.7mm

  • ...the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Toyota Vehicles - 1996 - 2018 4Runner | 2007 - 2014 FJ Cruiser | 2001 - 2007 Sequoia | 2001 - 2018 Tacoma | 2000 - 2006 Tundra |. The wheel spacers are 1.25 inches thick with 106mm center bore diameter, 12 x 1.5 threaded studs and a 6x139.7mm bolt pattern..
  • Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits..
  • OEM Fit, Quality, Finish - CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
  • Lifetime Warranty - This 1inch wheel spacer kit manufactued by AA Ignition comes complete with a lifetime warranty. If the part ever break or fail o....
Check Stock

Old Man Emu By ARB Suspension 3″ Lift Kit for 4Runner 2010+ in a Branded Box 4x Coil Springs and 4x Shocks and a Courtesy Cap

  • -Made In Australia Exclusive for Toyota 4Runner 2010+ 3 Inches Lift Kit. Works on 2WD, 4WD, SR5, Limited y TRD PRO models.Suspension made for up to 200 additional pounds of load installed on the Vehicle!.
  • -Includes front and rear coil springs, 2 front McPherson struts and 2 rear Monotube shocks, 1 Old Man Emu Cap inside branded Old Man Emu box..
  • -Coil Springs uses state of the art micro-alloyed spring steel to ensure superior resistance to sagging and corrosion. Finished in durable, hard wearing black powder coat. Designed and manufactured in Australia..
  • -While ride height increases are attained, a greater emphasis is placed on ride handling improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers..
  • -Durable rebound and compression multi-deflective disc stacking on either side of the free-flowing piston allows infinite tuning options for OME shocks..
Check Stock

Circuit Offroad Steller 17 Inch Wheels Flat Bronze 6x139.7 6x5.5 Bolt Pattern, 17x8.5, 10mm Offset, 106.1mm, RG-D2 Style Rims Compatible with 01-23 Tacoma, 02-23 4Runner, FJ Cruiser, GX470, GX460

  • Compatible with Toyota Trucks/SUV: 2001-2023 Tacoma, 2002-2023 4Runner, 2007-2014 FJ Cruiser, 2001-2007 Sequoia, 1999-2006 Tundra, 2003-2009 GX470, 2010-2023 GX460. **Does not fit older vehicles with manual locking hubs..
  • Spun Forged Construction - Incredibly Strong Yet Unbelievably Lightweight. Only 21.40 lb!.
  • Specs: 6x139.7 (6x5.5) Bolt Pattern. 17x8.5 Wheel Size. -10mm Offset. 4.36" Backspace. Flat Bronze Finish..
  • Designed for use with 60-degree conical seat "tuner style" lug nuts. We recommend B075V25781 M12x1.5 for fitment on Toyota/Lexus.
  • Fits OEM 17" up to 35"+ Tires. Note that larger tire sizes may require additional modifications including fender modification, leveling or lift kit, BMC/CMC, etc. See description or contact us for questions about tire fitments..
Check Stock

Circuit Offroad Windom 17 Inch Wheels Gloss Bronze 6x139.7 6x5.5 Bolt Pattern, 17x8.5, 10mm Offset, 106.1mm CB, RG-D2 Style Rims Compatible with 01-23 Tacoma, 02-23 4Runner, FJ Cruiser, GX470, GX460

  • Compatible with Toyota Trucks/SUV: 2001-2023 Tacoma, 2002-2023 4Runner, 2007-2014 FJ Cruiser, 2001-2007 Sequoia, 1999-2006 Tundra, 2003-2009 GX470, 2010-2023 GX460. **Does not fit older vehicles with manual locking hubs..
  • Spun Forged Construction - Incredibly Strong Yet Unbelievably Lightweight. Only 22.6lb!.
  • Specs: 6x139.7 (6x5.5) Bolt Pattern. 17x8.5 Wheel Size. -10mm Offset. 4.36" Backspace. Gloss Bronze Finish..
  • Designed for use with 60-degree conical seat "tuner style" lug nuts. We recommend B075V25781 M12x1.5 for fitment on Toyota/Lexus.
  • Fits OEM 17" up to 35"+ Tires. Note that larger tire sizes may require additional modifications including fender modification, leveling or lift kit, BMC/CMC, etc. See description or contact us for questions about tire fitments..
Check Stock