Reviews Lift Adapter Sleeve

MotoAlliance Impact Implements Pro 3-Position Blade w/Box Ends for ATV/UTV with 2 Receivers

  • 52", three (3) position blade with 12° angle adjustment in either direction (left / right).
  • Includes 2 box ends & 1 reversible/replaceable cutting edge.
  • Easy, one (1) pin mounting with the included pin.
  • Requires Pro 1-Point Lift System, Sleeve Hitch Adapter or CAT-0 hitch (sold separately) for attaching to ATV/UTV and Lawn Tractors.
  • Requires 2" Hitch Receiver or Sleeve Hitch (not included) installed on ATV/UTV.
Check Stock

Titan Attachments Green Category 2, 3 Point Quick Hitch Adapter

  • CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point Hitch without any modifications, bolting, or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included..
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Green to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 4,000-pound lifting capacity and is 37.25-inches wide, stands 19.5-inches high, and has a depth of 9-inches. The lower lift pin hooks are 32.5-inches center to center and are 2-inches thick while the top hook is 1.25-inches wide. The implement weighs 97-pounds..
  • NOTE: This unit is designed to receive Category 2 implements and will receive Category 1 implements with the use of conversion bushings on your lower lift pins a....
Check Stock

MotoAlliance Impact Implements Pro Landscape Rake w/Tipper Latch for ATV/UTV w/ 2\ Receiver

  • Nineteen (19) replaceable spring steel, 10" tall rake tines.
  • "Quick Pull" Release Latch allows rake to swing back for easy clean out of debris from tines.
  • Easy, one (1) pin mounting with the included pin.
  • Requires Pro 1-Point Lift System, Sleeve Hitch Adapter or CAT-0 hitch (sold separately) for attaching to ATV/UTV and Lawn Tractors.
Check Stock

CFYUSEU Scissor Lift Jack Max 3 Ton Capacity with Jack Socket Drill Adapter, Lifting Jack Car Kit with Wrench/Lug Wrench for Car SUV MPV, Black, QJD-3-1

  • Come with 17mm Socket Drill Adapter: The 3 tons jack will come with a 17mm/0.67inch socket drill adapter, reduces time and effort to raise or lower your scissor jacks, only takes about 5 seconds..
  • Two way to handle: The scissor car lift jack comes with socket drill adapter and ratchet wrench to put the scissor jack up and down. It will help you lift your vehicle more quickly with 2 handle tools..
  • With Lug wrench: The lift jack comes with 1 x telescoping lug wrench and 2xCR-V sockets(17/19mm,19/23mm) to loosen or tighten the lug nuts.Telescoping handle extends to 19 inches for maximum leverage..
  • Come With bag: With the carry bag, Making your carrying more convenient and making the package more compact. Includes: 1x 3 tons jack.
  • Lift Range & Note: Lifting range from 4.1 inches to 17.3 inches.
  • Maximum lifting weight: 3 tons. The jack is only used as a tool for lifting the car, not as a tool for supporting the car. 1 year warrnty, if you have any questions, please feel free to contact us..
  • Included components: Jack Socket Drill Adapter, Lifting Jack Car Kit with Hand Crank/Wrench/Lug Wrench.
Check Stock

Titan Attachments Category 2 Quick Hitch 3 Point Powder Coated Steel

  • CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point Hitch without any modifications, bolting, or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included..
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Black to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 4,000-pound lifting capacity and is 37.25-inches wide, stands 19.5-inches high, and has a depth of 9-inches. The lower lift pin hooks are 32.5-inches center to center and are 2-inches thick while the top hook is 1.25-inches wide. The implement weighs 97-pounds..
  • NOTE: This unit is designed to receive Category 2 implements and will receive Category 1 implements with the use of conversion bushings on your lower lift pins a....
Check Stock

Titan Attachments 3-Point Quick Hitch fits Cat 1 & 2 Tractors Easily Adjustable

  • CATEGORY 1 OR 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 1 or 2, 3 Point hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy!.
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 3 x 3-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 1 and 2, 3 Point Quick Hitch is powder-coated Black to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 3,000-pound lifting capacity and is 31-inches wide, stands 23.5-inches high, and has a depth of 8-inches. The lower lift pin hooks sit 29-inches center to center and are 1.25-inches thick. The implement weighs 60-pounds..
Check Stock

Danco 88966 Universal Lift and Turn Bath Drain Trim Kit with Overflow Plate, Chrome

  • EASY BATHROOM FIXTURE UPGRADE: Chrome finish provides a stylish elegant look to your tub/shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit most faucet brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze

  • EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

  • COLD-ROLLED STEEL: The crank sleeve joint is made of industrial-grade cold-rolled steel, CNC precision processed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
  • STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
  • PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
  • EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch....
Check Stock

Danco, Brushed Nickel, Universal Lift and Turn Bath Drain Trim Kit with Overflow, 89239, 1-Pack

  • EASY BATHROOM FIXTURE UPGRADE: Brushed Nickel finish provides a stylish elegant look to your tub/shower with easy DIY installation.
  • UNIVERSAL FIT: Designed to fit most bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
  • KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
  • DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
Check Stock

3-Point Attachment Adapter for Universal Skid Steers, Quick-Attach Equipment

  • MACHINERY BUILT FOR HEAVY LOADS: Use this attachment to allow your skid steer machine to be equipped with various tractor parts and equipment that can make your work life easier. Using this adapter, you can attach larger implements for heavier loads. This is great for farmers, landowners, or even attachment dealers..
  • VERSATILE TRACTOR ACCESSORIES: Titans 3point skid steer plate attachment uses a universal quickattach feature thats compatible with John Deere, New Holland, Bobcat skid steer, and Kubota tractors and loaders. This attachment rivals topnotch construction vehicles in its potential. Titans skid steer adapter will optimize your machines ability to lift heavy supplies from one place to another..
  • IMPROVE PRODUCTIVITY WITH LIFTING EQUIPMENT: Few farm tools offer the versatility of this tough 3point skid steer attachment adapter. Large rocks, which normally could be hard to move, are a breeze to move with an attached pallet forks heavy load shelf. You can also attach other tractor accessories that make lifting heavy supplies much more doable..
  • ADJUSTABLE LIFT ARMS: Our lift arms have an adjustable width of 8" to 43". This allows you the versatility you need for relocating or organizing different sizes of implements or tools across your lawn, yard, ....
Check Stock

Titan Post Drivers PGD3200 3.25 Inch Barrel 1.3 Horsepower 4 Stroke Gas Powered Fence Post Hole Digger Post Driver Pole Pounder

  • ...REAT FOR COMMERCIAL USE: Powerful 1.3 -horsepower, 4-stroke, gas-powered engine drives stakes at 1,850 beats per minute.
  • FOR POSTS UP TO 3-1/8 INCHES: Drive posts from 1 to 3-1/8 inches in diameter with 3.25-inch barrel and included 2-inch adapter sleeve for 1-inch and 2-inch posts.
  • EASY AND COMFORTABLE: Designed for all-day use with minimal operator fatigue thanks to comfortable grip handles and dampening springs that lessen vibration to reduce fatigue and back strain.
  • Lightweight at 45 pounds, making the pole pounder easy to lift, move, and carry down the fence line.
  • Simple recoil pull start with trigger throttle and integrated stop button.
  • EVERYTHING YOU NEED TO START: Includes driver, adapter, rolling carry case, and repair kit.
  • No hoses or external power sources needed, convenient and easy transport with no extra costs.
  • 100-percent self-contained design protects machinery.
Check Stock

Powerbuilt All-in-One Unijack Pinch Weld Saddle Adapter, Protect Vehicle Frame, Car Lift - 240337

  • LIFT MORE: Adds Pinch Weld application to all Unijacks and All-in-One Jacks. Now lift right on the pinch weld point with these jacks without worry of damaging or bending the pinch welds in the frame..
  • EASY: Simply slide the pinch weld adapter onto the existing saddle riser of the All-in-One or Unijacks..
  • UNIVERSAL FIT: The Pinch Weld Adapter fits all Unijacks and All-in-One Jacks on the market. 640912, 620470 & 620471..
  • SAFER: The Pinch Weld adapter not only protects the frame of the vehicle from damage, but also also for more secure contact with the vehicle and will the wide platform straddling both sides of the pinch weld your vehicle will be more stable during lifting..
Check Stock