Reviews Lga1intel Motherboard Mini Atx

Lian Li O11 AIR Mini White ATX Case - O11AMW

  • Motherboard: E-ATX (Max 280 mm wide)/ ATX/ Micro-ATX/ Mini-ITX.
  • Material: Aluminum Panel, Mesh Panel & Tempered Glass.
  • Drive: 6 X 2.5 SSD or 2 X 2.5 SSD + 4 X 3.5 HDD.
Check Stock

MUSETEX MATX (Micro-ATX) PC Case with 2pcs ARGB Fans Type-C Port USB 3.0 Airflow Mid Tower Mesh Front Panel Tempered Glass Side Door Mini ITX Computer Gaming Cases (Y3-N2-BW)

  • ...agement strips with dedicated routing allow you to build a durable and beautiful computer host..
  • [Addressable ARGB FANS] 2pcs 120mm ARGB fans are pre-installed to provide beautiful lighting and excellent airflow. The color of the fans can be controlled by the LED buttons on the I/O panel as well as by connecting the motherboard for software control..
  • [ Perfect Capacity ] Mesh PC case is effortless to install 3 x 2.5" SSD.
  • Motherboard Compatibility: Micro-ATX/ Mini-ITX.
  • [MUSETEX Y3 Series] Motherboard Compatibility: Micro-ATX and Mini-ITX. Not for ATX motherboard..
Check Stock

Cougar Middle Tower Cases MX330-X

  • Motherboard support: Mini ITX/ Micro ATX/ATX.
  • USB3.0 x 1/ USB2.0 x 1/ mic x 1/ Audio x 1/ fan controller/ quick charging for mobile phone.
Check Stock

Cougar MX330 Mid Tower Case with Full Acrylic Transparent Window

  • Motherboard Support: Mini ITX/Micro ATX/ATX.
Check Stock

Cylon White RGB Mid Tower Computer Case

  • Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
  • Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
  • A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
  • Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..
Check Stock

COMeap 24 Pin Female to Mini 24 Pin Male ATX Main Power Adapter Cable for DELL Optiplex 380 580 760 780 960 980 3.94-inch(10cm)

  • 『24P – mini 24P』24 Pin end to plug into the standard 24 pin ATX Power Supply, mini 24 Pin end to plug into DELL motherboard.
  • 『Solution』Allowing you to convert standard 24 pin ATX power supply to mini 24 pin power supply connector.
  • 『Parameter』Gauge: 1007-20AWG (standard tin-coating copper wire), Length: 3.94inches(10cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs.
  • 『Compatibility』Compatible with DELL Optiplex 380 / 580 / 760 / 780 / 960 / 980.
  • 『Note』Work on Dell Optiplex power supply / MB( May not work on optiplex 980 MT/SMT ( mini tower or small mini tower ) series as it uses a different power supply set up.). If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
Check Stock

Corsair 4000D Airflow Tempered Glass Mid-Tower ATX PC Case - Black

  • Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC..
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables..
  • Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported..
  • A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height)..
  • Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack..
Check Stock

Balam Rush, Legend Series, Skydron - GT995, Full Tower, E-ATX, RGB, Black

  • Form factor: Tower, USB 2.0 Ports: 1 , USB 3.X Ports: 2, Audio 3.5 mm Port: 1 , Microphone 3.5 mm Port: 1.
  • Motherboard Support: E-ATX, ATX, Micro ATX, Mini ITX Dust Filter: bottom removable, top magnetic.
  • Max GPU Length: 14.56 inches , Max. CPU Cooler Heigth: 6.29 inches.
  • Fans: 3* Front, 1* Rear , 2* Top , 3* Bottom (4.72 inches).
  • Drive bays (internal): 2* combined / 3* 2.5 ".
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock

anidees AI Crystal Cube AR V3 Dual Chamber Tempered Glass EATX/ATX PC Gaming Computer Case, Water-Cooling Ready, Steel Structure, w/ 5 RGB PWM Fans / 2 LED Strips - Black AI-CL-Cube-AR3

  • Cube ATX PC Case with Dual Chamber design for better airflow and cable management..
  • 5mm Tempered Glass side and front panel , 70% transmittance to show off the system on the side panel , USB2.0x 2, USB3.0x2.
  • Motherboard Support E-AT, ATX, m-ATX, mini-ITX , Support Vertical Graphic card. Removable Dust filters in the front, top and bottom included.
  • Radiator Support 240/280 mm in the top and front side. Graphic Card Length Max Support 330 mm /13 inches , CPU Cooler Max height 168mm / 6.6 inches.
  • Easy to use : the fan hub allow you to control the fan speed and LED mode by remote control or connect to the motherboard, control the fan speed by PWM and light by ASUS Aura Sync (ARGB) , MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion / Fusion 2.0 (5V addressable 3pins header on motherboard)..
Check Stock

671DP Dell Inspiron 15 3521 5521 Laptop Motherboard w/Intel Dual-Core 2117u 1.8GHZ CPU

  • Mini 6 Pin port connects to Dell motherboard,15 Pin SATA port connects to hard drive.
  • Connector A: ATX 12V mini 6 pin, Connector B: 2x SATA 15 pin.
  • This cable is only designed for SSD hard disk CD-ROM 12-inch..
  • Length(including connectors): 12 + 6 inches(30 + 15cm)(approx), with Braided Sleeves for easy cable management.
  • Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668.
  • Do not support: DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
  • NOTE: ATX connector is mini 6 pin , not standard 6 pin..
Check Stock

anidees AI Crystal XL RGB V3 Full Tower Tempered Glass PC Case System is not Included,Water-Cooling Ready Includes 5 x 120 RGB Fans 2 x LED Strips - Black AI-CL-XL-AR3 Case ONLY

  • Motherboard Support :HPTX .XL-ATX E-ATX (12" x13"EEB), ATX, m-ATX, mini-ITX. (System is not included).
  • Efficient Cooling Solution: Five pre-installed fans, including four 120 mm RGB LED Fans in the Front and one 120mm RGB Fan in the Rear provides great....
  • Extreme Roomy Internal Space: Graphics Card Length: 530 mm / 20.8 inches, CPU Cooler Height: 190 mm / 7.4 inches ,Radiator Support :....
  • Tempered Glass Design: Three High quality 5 mm thickness tempered glass panels on the front, and sides of the case. Connectivity: USB 3.0 x 2, USB 2.0....
  • Easy to use and RGB Ready : the fan hub allow you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the....
Check Stock

TAYCCEU ATX CPU 8 Pin Female to 8 Pin (4+4) Male Power Extension Cable 2-Pack for Motherboard CPU Power Supply PSUs, 12 inch

  • Motherboard ATX CPU 8 Pin Extension Cable. Help you extend the connection from power supply to motherboard..
  • Connector A: ATX CPU 12V 8 pin female ( NOTE: it is CPU 8 pin, not pci-e 8 pin).
  • Connector B: ATX 12V 8 pin (4+4) male (Detachable CPU 8 pin(4+4) end could be used as EPS ATX 8 pin or P4 ATX 4 pin by sliding on/off the 4 pin.).
  • Compatible with power supplies with ATX 8 pin male port output & motherboards with ATX 4 pin or ATX 8 pin port.
  • (This cable is a common power supply extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output.).
  • Length:12inch(30cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Max power rating: 500W, Quantity: 2pcs.
  • Warning: This cable is used to extend the connection from power supply to motherboard.It does not work with GPU. If you use it to connect your GPU, it will definitely burn or damage the GPU and we won’t take any responsibility for wrongly using or installing..
Check Stock