Reviews Left hand Thread Screws

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Muzata 165ft Crystal Vinyl Coated Wire Rope 3/16\ Thru 1/4\ for 3/16\ Cable Railing System Galvanized Steel Cable 7x7 Strand Indoor Outdoor Decking Stair Balustrade DIY WR20 WP1

  • Cable railing kit product of Hong Kong company,it fits for 1/8 inch cable railing system. Made of US AISI standard 316 stainless steel for maximum corrosion resistance, durability and tensile strength.It can be used indoor and outdoor..
  • This cable railing hardware will make your cable railing more beautiful beacuse no need extra screws to install and no need turnbuckle to tension the cable..
  • This left & right hand thread design,It will rotate wire rope to the same direction and tighten the cable , Which also resolves the problem of twisting the wire rope (The fig.3 is key step of installation,It will help your installation easier and more beautiful)..
  • This cable railing kit include 40 pcs left and 40 pcs right thread lag screws ,1 pcs special drill bit ,1 pcs special wrench.
Check Stock

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Drill Hog® 15 Pc Left Handed Drill Bit Set Screw Extractor EZ-OUT HI-Molybdenum M7

  • Left Hand Thread for Removing Broken Bolts, Screws, and Studs.
  • 135 Degree Split Point Prevents "Walking".
Check Stock

SHARROW 5pcs Archery Recurve Bow Sight Pin Hunting Bow Sight Accessories Single Pin Sights Archery Accessories

  • Great for beginner's sight pin replacement,fit for left and right handed shooter..
  • Robust and has standard thread to fit all recurve bow sight..
  • Increase shooting accuracy and experience the joy of archery..
  • The sight pin attaches to the mounting bracket via a steel screw that easily screws on to the bracket..
  • Package include:5pcs archery recurve bow sight pin..
Check Stock

Air Conditioner Exhaust Hose with 5 Inches Diameter, Counterclockwise Thread Compatible with Portable Air Conditioner (59 Inches Length)

  • COMPATIBILITY: this air conditioner hose is compatible with portable air conditioner, replaces the original hose with 5 inch diameter and counterclockwise thread.
  • STRETCH AND SHRINK FREELY: the hose is extendable, the shortened length is 12.6 inch/ 32 cm, it can extend up to 59 inch/ 150 cm, easily extend the length of the exhaust hose to fit into anywhere you want.
  • DURABLE AND STURDY: hose is constructed from polypropylene with good flexible, durable and portable, this is a good replacement to keep your air conditioner from leaking when the essential vent hose has cracked.
  • EASY TO INSTALL: gently extend out the exhaust hose to meet up with the existing hose, line up with the both ends, clockwise rotate until it snaps into place, it's easy to install.
  • Note: please make sure this is the correct hose both the size and thread for your portable air conditioner before purchasing.
  • If you have an adapter that screws on the end, the winding direction is very important.If you have 5" ends but make sure that your ends are right hand threaded because the hose is right handed some need left hand threaded,If you have any problems about your purchase, please don't hesitate to contact us and we'll make it right.
Check Stock

Taprite Regulator Guage, 0-2000 PSI, Left Hand Thread

  • 0-2000 PSI replacement gauge for a regulator requiring a left handed thread.
  • 0-2000 replacement gauge for regulators that required left hand thread on high pressure side..
  • Shipping rate is for the Continental US ONLY..
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock