Reviews Left Hand Thread Bolt

Mortice Lock

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8" backset. INSTALLATION TIP - Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET - The E 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. With a classic bronze plated steel trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2497 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This entry door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Defender Security E 2311 Mortise Keyed Lock Set with Glass Knob – Perfect for Replacing Antique Lock Sets and More Fits Doors with 2-3/8 Backset

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8" backset. INSTALLATION TIP - Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET - The E 2311 glass knob set is the perfect choice for replacing or updating interior door hardware. With a polished brass trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2311 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This entry door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
Check Stock

Prime-Line E 2497 Mortise Keyed Lock Set with Glass Knob – Perfect for Replacing Antique Lock Sets and More, Fits Doors with 2-3/8" Backset

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8″ backset. INSTALLATION TIP – Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET – The E 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. With a classic bronze plated steel trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2497 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors – the lock bolt is key activated from both the inside and outside..
Check Stock

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock

10Pcs Screw Extractor and Left Hand Drill Bits Set, Bolt Remover Reverse Cobalt HSS Steel Drill Bit for Remove Stripped Screws and Broken Bolts

  • ...remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use.These extractors are excellent if you are working in a production environment and using screw head bolts..
  • High and Durable Material: The left hand drills are made from cobalt fortified HSS material, which increases durability and service life.This screw extractor has strong wear resistance and clear chip removal. HSS is harder, tougher and easier to drill, turn and remove damaged screw or bolts than other materials..
  • Multiple Sizes: 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8", 5/32", 3/16", 1/4", 19/64".With a portable storage case that provides excellent protection and against lost screw extractors..
Check Stock

Conversion Swap Headers Manifold replacement for Mazda Miata MX-5 Eunos 89-97 1.6/1.8L Stainless

  • 【Specifications】: Thickness: 1" (25 MM), Bolt Pattern : 5x4.5 inch / 5x114.3 mm, Thread Pitch: 14x1.5 , Center Bore: 71.5 MM, Color : Anodized Silver.
  • 【Fitment】: Replacement for 2005-2013 300, Replacement for 2009-2013 Challenger, 2006-2013 Charger, 2005-2008 Magnum.
  • 【Easy to Install】: Simply bolt the wheel adapter to your hub, and then bolt your wheel to the adapter..
  • 【Benefits】: Improve vehicle handing, can provide more stability to the vehicle and corner better..
  • 【Note】: Before you place your order, please check the compatibility table in the upper left corner and page description carefully to ensure that it is suitable for your car. If you have any questions, pls ask us for help..
Check Stock

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

  • Easy to Identify: 28 size nut and bolt identification tool ruler is easy to distinguish between metric and inch thread sizes, and can verify the sizes and thread pitches of standard hardware, so you don't need to worry about the size of fasteners you have any more.
  • Metric Thread Sizes: -M4 x 0.7 -M5 x 0.8 -M6 x 1.0 -M7 x 1.0 -M8 x 1.0 -M8 x 1.25 -M10 x 1.0 -M10 x 1.25 -M10 x 1.5 -M12 x 1.25 -M12 x 1.5 -M12 x 1.75 -M14 x 1.5 -M14 x 2.0.
  • Bolt Size and Thread Gauge: bolt and nut identifier gauge measures the bolt length and nut diameter quickly, and identifies hardware from #6 to ½" and 4mm to 14mm.
  • Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
  • The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
  • Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
  • Sturdy and Durable: the bolt identifier is made of ....
Check Stock

Set of 20 0009905307 14mm x 1.5 Wheel Lug Bolt OE Factory Wheel Compatible with Mercedes W220 W204 W164 W251

  • M14-1.50 Wheel Bolt Compatible with: Mercedes W220 W204 W164 W251.
  • OE Factory Wheel lug Bolt: Use to secure the wheels to the wheel hubs, which migh be one of the most important fasteners on your car.
  • Spec: Thread Pitch: M14x1.5, Total L: 67.5mm, Thread Length:20mm, R15 Ball Seat, also called Spherical Seat, Dacromet Surface Treatment.
  • Dacromet technology for added corrosion resistance to combat rust, undergone quality testing, including proof lead, salt spray, hardness and thread check testing to meet product standards.
  • Donot use impact wrench, Recommend To use the Hand Wrench to tight Wheel Torque.
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • "QUICKLY IDENTIFY BOLTS AND NUTS - The SST Identibolt is your One-stop Shop for Verifying the Size and Thread Pitch of All Your Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 A....
Check Stock

Ball Joint Kit,Set of (3) Tie Rod End with grease fitting Fits for Club Car DS Golf Carts (1976-2008)

  • Fits Club Car DS electric golf cart models 1976-2008.
  • Brand new high quality Club Car DS tie rod end ,Allows your steering and suspension the ability to perform properly..
  • Ball Joint,Left-Hand Thread(included 2Pcs),OEM#7540.
  • Ball Joint,Right-Hand Thread(included 1Pcs),OEM#7539.
  • Set of (3) Right and Left Thread Tie Rod End.
Check Stock

Semi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,

  • Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
  • U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
  • For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
  • Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
  • The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
  • The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check Stock

MOSNAI Golf Cart Ball Joint Kit Tie Rod End for EZGO TXT 2001-up Electric or Gas Golf Cart Driver and Passenger Side 70902-G01 70902-G02 (2 PCS)

  • ✅【Fit Models】Golf cart EZGO tie rod ends ball joint, fits 36V EZGO TXT 2001-up electric & gas golf carts..
  • ✅【Replaces OEM Part】Driver side-left hand thread (included 1Pcs), OEM#70902-G01.
  • Passenger side-right hand thread(included 1Pcs), OEM#70902-G02..
  • ✅【Function】EZGO tie rod ends, replacing your worn tie rods will improve your carts steering and reduce tire wear..
  • ✅【Easy Installation】The boots contain grease, don't need to add extra. Replaces your worn out or damaged parts directly, no need to modify the vehicle..
  • ✅【Package Content】1PCS 70902-G01 left-hand thread outer tie rod end + 1PCS 70902-G02 right-hand thread outer tie rod end, premium quality materials to provide a long service life..
Check Stock