Reviews Leer Camper Shell Lift Supportss

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ... NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors ....
Check Stock

C16-10788 12 inch 35lb Gas Strut Spring Shocks C1610788 for Truck Toolbox A.R.E. Camper Shell Leer Window 12' 35 Pound Lift Support Struts

  • ✅ C16 10788 12 inch Gas Strut - This 12 inch gas struts 12 inch 35lb Gas Struts are usually used for camper shell topper window pickup toolbox Lid, leer capper, pickup topper, boat engine cover, steel equipment box, boat storage lid, truck canopy, etc..
  • ✅ 12 inch 35 Pound Gas Shocks - Most Suitable Support weight is between 28 to 38 pounds, if out of this range, pls select other ARANA struts with different pressure.
  • Or if you are not sure if this product is suitable, our customer service team will give you professional guide, just click "Ask Seller".
  • ✅ C16-10788 12 inch Gas Spring - Force 35lb Per Shock, Extended Length A [in]: 12.2, Compressed Length B [in]: 8.66, intercharge part no.: C1610788, c16-10788, c16 10788.
  • ✅ Camper Shell Window Lift Struts - 18 Months Replacement Service Plus Lifetime Technical Support, once any quality problems or installation/using problems, Click ASK SELLER besides your order from us and let us solve your problem!.
  • ✅ Truck Tool Box Lid Lift Supports - C1610788 gas shocks could be used as the replacement lift struts for truck Pickup Tool Box, Weatherguard aluminum toolbox, Camper shell topper window and other self-built application.
  • Note: Lift Supports couldn't be COMPRESSED by hands before installing!.
Check Stock

C16-20651 18.7 Inch 40lb/178N Gas Struts Shocks Spring Lift Support for Leer Camper Shell Topper Rear Windows Door Truck Cap Toolbox Canopy Struts Replacement Parts, Set of 2 by HUOPO

  • 【Truck Camper Shell Replacement Part】 Gas shock spring strut for leer camper shell topper rear windows door truck cap toolbox canopy cover. Please compare the interchange number and dimensions with the OEM gas spring before purchasing..
  • 【C16-20651 Gas Struts Specifications】 18.7 inch 40lb/178N Gas Struts Shocks Spring Lift Support. Extended Length 18.70 inch. Compressed Length 10.82 inch. The 18.7 inch gas struts connector is 10mm Nylon Socket type. End fitting 10mm ball stud. WARM TIPS: The 40lb gas struts is so strong that you can't compress it by hand..
  • 【18.7 Inch Shock Interchange Number】 Find the below Interchange number on your OEM gas shock cylinders for a exact match: C16-20651 SE187P40 SE187P40S10, These camper shell shocks are compatible with many truck canopy types, LEER truck cap parts, ARE truck topper parts, Snugtop replacement parts, These are the perfect OEM replacement parts..
  • 【C16-20651 Struts Package Content】Package contains 18.7 inch gas struts*2. Installation with a flat screwdriver, no special tools required..
  • 【13 Months Replacement Warranty】 HUOPO offer a 13-month replacement service. Let us know your concerns about Huopo products. Contact us via Amazon Mail. Our customer service team will respond quickly and wi....
Check Stock

2 Truck Upfitters 17 Gas Props 17.1 Extended 9.9 Compressed 45 pounds of Pressure ea for are ATC Snugtop Leer Camper Shell/Truck Cap Rear Door Measurement Required! Incl 4 Ball mounts!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL....
  • Truck Upfitters Pair of 45 pound (each) gas struts. 17.1" extended length and 9.9" compressed length. This size of door shock absorber is for tall....
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened &....
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and....
  • Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap....
Check Stock

C16-20651 C16-33313 18.7 inch 40 lbs Gas Strut Shocks Lift for A.R.E Leer Camper Shell Pickup Truck Cap Topper Canopy Glass Door Hatch Back Window Bed Cover, 18.7" Gas Spring by PAMAGOO 2 Pack

  • ⌈18.7 inch Gas Strut⌋Extended length: 18.70 Inch, Compressed length: 10.82 Inch. 40 Lb / 178 N per strut, 2 PACK. Package information: 18.70 inch 40 lbs gas prop strut X 2.
  • ⌈18.7 inch Gas Shock⌋Lift-o-mat spring strut lift for A.R.E Leer camper shell, pickup truck cap topper, canopy glass door hatch, back window, bed cover, replacement shocks, etc..
  • ⌈18.7 inch Gas Spring⌋Interchange Part number: C1620651, C16-20651, C16-33313, C1633313, SE187P40, SE187P40S10..
  • ⌈Leer Camper Shell Gas Shock⌋If the weight and the pressure of the gas strut do not match, the gas strut may not work properly, please select the appropriate gas strut according to the original part number and pressure value. NOTE: The gas struts can not be compressed by hands before installation!!!.
  • ⌈Canopy Truck Gas Strut⌋180,000 times -passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: -40℃~60 ℃/-40℉~140℉. PAMAGOO will provide you with professional customer service BOTH before and after your purchase and offer 18-MONTHS support service. We have gas spring installation videos and online service to guide quick installation in minutes. After successful installation, the Door/Window can be lifted easily..
Check Stock

OTUAYAUTO 16 Inch Lift Support - 169N/38Lbs Universal Gas Strut - Replacement for Truck Cap, Camper Shell Shocks, Leer Topper, Canopy Window Lift, Tool Box, - OEM# C16-09209 (Pack of 2)

  • 【Fitment】This 16 inch lift support struts compatible with fortruck cap, camper shell shocks, leer topper, canopy window lift, tool box, outdoor cabinet, leer trunk parts.
  • 【Size】Extended Length (Center-to-Center): 15.7 inch (399mm), Compressed Length (Center-to-Center): 9.4 inch (239mm), 10mm Ball Stud Sockets.
  • 【Specificationse】Force: 169N/38Lbs (Per Strut), 338N/76Lbs (Per Set), Interchange number: C16-09209. [The range of force that one gas struts can bear is: 30-43 lbs, if it exceeds this range, please do not buy it ！！！].
  • 【Package】2pcs 16 inch 169N/38Lbs lift supports, without screws, installation was easy enough, stronger than the originals.
  • ★ GUARANTEE ★ 60-Day return refund and 1-Year quality warranty, we are dedicated to providing 100% customer satisfaction.
Check Stock

HARKEN - Truck Cap Overhead Garage Storage Hoist, Self-Leveling, Safe Anti-Drop System, Easy One-Person Operation, Smart Garage Organization

  • COMPATIBLE WITH ANY TRUCK CAP, TOPPER, AND CAMPER SHELL: Designed to safely and easily store your truck cap while organizing your garage. Commonly used with Leer, ARE, SnugTop, and Century caps but compatible with all brands..
  • SAFEST HOIST DESIGN WITH ANTI-DROp SYSTEM: Self-locking cleat grips instantly to prevent accidental release if the rope is dropped. Patented system lifts the load evenly regardless of weight distribution, allowing the load to be stored against the garage ceiling for maximum clearance underneath..
  • EASY ONE-PERSON OPERATION: Simply park underneath the installed hoist, secure the load, and lift. One person can have their camper shell on or off in minutes. Pulley system creates a mechanical advantage where 15-25 pounds of force is all it takes to lift the load to the ceiling..
  • AVAILABLE IN THREE LENGTHS: Choose from a 10, 12, or 16 foot model based on your floor-to-ceiling garage height..
  • QUALITY MANUFACTURING WITH 5-YEAR WARRANTY: High quality stainless steel hardware and double braided rope provide durability. Ball bearing pulleys keep the system running smoothly. 60 years of innovation. Made in USA..
Check Stock

Wadoy 15.7 Inches Truck Camper Shell Lift Supports Struts Shocks Gas Spring C16-09209 2 Packs

  • CAMPER SHELL STRUTS PARAMETER: Force is 38Lbs/169N per strut.Extended length (center to center)is 15.7". Compressed Length(center to center) is 9.4".....
  • GREAT GAS SPRING REPLACEMENT: Interchange part number C16-09209. Original equipment design ensures easy installation and precise operation, no special....
  • PREMIUM QUALITY: These topper struts are made of high quality materials, and can withstand a wide variety of harsh weather, such as heavy rain and low....
  • APPLICATION: These camper shell shocks can be used on Leer/ARE/Tonneau camper shell rear window topper door, also on RV Truck car's cover window and....
  • HASSEL-FREE SHOPPING: Package includes C16-09209 Gas Springs*2. If you have any questions please contact us any time. We will offer you satisfied....
Check Stock

20 inch 60 Lbs Gas Struts Prop Shock 4450 C1608260 for RV Side Door Motorhome Door Camper Shell Rear Window Tonneau Cover Trap Door TV Cabinet RV Bed, 2Pcs

  • 20 inch 60 Pounds gas struts – Extended Length (Center-to-Center): 19.7 in (500mm), Compressed Length: 11.8 in. Force: 60 Pounds Per Strut. End Fiting: 10mm Ball Stud Sockets..
  • 2 struts each package- Suitable support weight is from 45 pounds to 66 pounds for 2 STRUTS. Note: DO NOT Compress them by Hands Before Installing, the Struts could Only be Compressed After Installing Successfully!!!.
  • 20 inch Truck cap lid lift supports – Replaces the following OEM Numbers: 4450, C1608260.
  • 20″ 60 lb gas shocks – Suitable to use on RV Door, Motorhome Door, Tonneau Cover, TV Cabinet, RV Bed, Trap Door, leer camper shell window, truck cap, etc..
  • NOTE: If the lid weight is less than 45lbs or more than 66 pounds, please choose other pressure struts!.
  • 20″ Camper shell window struts — Most suitable support weight is 45-66 pounds.
  • if you want to use these struts on other custom-built lids, please measure the lid weight and ensure they are between 30 pounds and 45 pounds.
  • If you find the pressure not fit after installing, DO message us.
Check Stock

AutoForever C16-09209 16 inch Gas Shocks C1609209 Camper Shell Window Struts Lift Supports Springs Prop Pack of 2

  • 16 inch Gas Shocks---Extended Length: 15.96" inch.
  • C16-09209 Lift Supports---Compatible with the following Interchange part number: C16-09209 C1609209.
  • 16 inch Gas Struts--- Are usually used on Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover RV Truck Car's window.
  • 16 inch Gas Springs Features--- Rust-resistant Black Nitride resistant piston rod extends product life. Easy lifting, reduced closing effort.
  • Installation Tips---we recommend a size measuring on your old struts or a weight measuring on your project lid weight to avoid buying wrong item.
Check Stock

C16-09209 16 inch 38 Lbs (169 N) Camper Shell Shocks Lift Support Gas Springs Struts Props for Leer are ATC Tacoma Topper, Rust Resistant Gas Strut Gas Spring, 2 PCS

  • 【Basic Info.】The lift supports are universal and used for Leer ARE ATC Tacoma Camper Shell Topper RV. It’s 16 inches from side to side. Each strut can support 38 Lbs at most. Please don’t compress it with your hand. It has 12+6 months warranty for any quality problem as well as lIfe-time customer service..
  • 【How to Choose Right One?】We recommend that measure weight and length before purchasing. It will be more convenient for your shopping experience. The lift support can be used for DIY, RV, or camper shell. Please notice that 38 Lbs/ 15.7 inches per strut without ball studs..
  • 【Worry about Easy-use?】BDFHYK gas struts are very easy to install. You can install it only by yourself with a flat screwdriver. We prepared online instructions for your reference anytime and anywhere. It’s also very convenient after installed and almost like your original one. It’s very soft during use..
  • 【Worry about Quality?】 Every product needs to be tested many times before announce until we make sure there are no problems like noise, stiffness and other common problems. We also offer 12+6 months warranty service for replacing a new one if you meet any quality problem during use. Please trust us and we will offer you a satisfactory experience..
Check Stock

20 inch 40 Lbs Gas Struts Prop Shock C16-08316 C1608316 for RV Side Door Motorhome Door Camper Shell Rear Window Tonneau Cover Trap Door TV Cabinet RV Bed, 2Pcs (Suitable Weight: 30-45 Pounds)

  • 20 inch 40 Pounds gas struts - Extended Length (Center-to-Center): 19.7 in (500mm), Compressed Length: 11.8 in. Force: 40 Pounds Per Strut. End Fiting: 10mm Ball Stud Sockets..
  • 2 struts each package- Suitable support weight is from 32 pounds to 45 pounds for 2 STRUTS. Note: DO NOT Compress them by Hands Before Installing, the Struts could Only be Compressed After Installing Successfully!!!.
  • 20 inch Truck cap lid lift supports - Replaces the following OEM Numbers:C1608316, C16-08316, C1621705, C16-21705, C1622180, C16-22180, SG327005..
  • 20" 40 lb gas shocks - Suitable to use on RV Door, Motorhome Door, Tonneau Cover, TV Cabinet, RV Bed, Trap Door, leer camper shell window, truck cap, etc..
  • NOTE: If the lid weight is less than 32lbs or more than 45 pounds, please choose other pressure struts!.
  • 20" Camper shell window struts -- Most suitable support weight is 30-45 pounds.
  • if you want to use these struts on other custom-built lids, please measure the lid weight and ensure they are between 30 pounds and 45 pounds.
  • If you find the pressure not fit after installing, DO message us.
Check Stock

17" 55 Lbs/245N Gas Spring Shocks Struts Lift Support for Hydraulics Piston Lid Stay for Camper Shell Leer are ATC Truck Topper Rear Window Truck Cap Canopy Door

  • 【Package Content】2 × 17" 55 Lbs/245N Gas Struts.
  • 4 × Ball Studs.NOTE: If the lid weight is less than 44Lbs or more than 61 pounds, please choose other pressure struts!!!.
  • 【Product Parameters】This Set of 2pcs 17" Lift Supports Extended size 17.1 inch(434mm), Compressed size 10.2"；Force: 55 Lbs Per Strut, two are 110Lbs..
  • 【Application】Gas Struts are usually used for your ARE ATC Leer Camper Shell Awning Snugtop Topper Canopy Truck Cap Pickup Window RV door or Toolbox Lid etc..
  • 【Easy Installation】Instructions Included, Screws Included.If you want to install them on DIY builds, you need to buy matched 10mm mounting bracket. After installation, these lids will lift safely and smoothly using ONLY ONE finger.Note: Lift Supports couldn't be COMPRESSED by hands before installing!!!.
  • 【100% Guarantee】 If you have any questions, please contact us in time, just click "ask seller" beside your order from us, we will provide you with the best solution..
Check Stock