Reviews Led Strip Led Ribbon

Redgiants 10M RGB 5050 Non-Waterproof LED Strip Light 300 SMD 44 Key Remote 12V 5A Power

  • Package Content: 1x 44 key IR Remote + 1x 12V 5A Power Supply + 2x 5 meters 300LEDs 5050 Waterproof led strip..
  • 5050 Waterproof Led Strip Color: RGB (Red Green Blue) Flash SMD IP 60 LED View angle: 120° Supply voltage: DC 12V Operating temperature: -20 to 60 degree LED quantity: 300 LEDs Working Current/5Meter: 2A.
  • Lumens: 900LM Lifetime: 50,000+ hours 44Key Remote Controller Working Temperature: -20°C-60°C Output: three CMOS drain-open output Connection mode: Common Anode(+).
  • Every 3-LED cutable without damaging the rest strip Flexible ribbon for curving around bends Ultra-bright but running at low temperature Self Adhesive Strip for Easy Installation..
  • Input/Output: 12V Max load current: 2A each color Included CR2025 Remote Controller Battery with Kit USA Power Supplier Included.
Check Stock

StarlandLed LED Aluminum Channel Wide Aluminum Profile 10-Pack with Complete Mounting Accessories for up to 16mm LED Strip Light Perfectly Suit for 16mm LightStrip

  • 【Compatibility】 The inner width of this LED channel is 16mm so it is suitable for most led strip types in the market including Philips Hue LightStrip Plus,waterproof led ribbon,15mm solderless strip connectors.,etc.(Noted: Make sure that the width of your LED strips and strip-connector is less than 16mm before buying this profile).
  • 【Protective】 Not only do aluminum channel systems dissipate the heat produced by LEDs, but the cover protects the LEDs from exposure to dust, hair and physical contact..
  • 【Diffuser】 Milky white cover diffuses LED strip lights, rending a softer, more uniform light, ideal for decorative and accent lighting..
  • 【Versatile and Easy】Can be cut and customized to suit any project.Simply stick the LED strip light's adhesive backing inside the aluminum channel, snap on the diffuser cover..
  • 【Package Included】This 10-Pack LED Strip Aluminum Channel/extrusions/profiles/track come with 10pcs Frosted diffuser covers, 20pcs end caps,20pcs mounting clips, and 20 pcs screws.
  • Each segment is 1M(3.3ft), total length is 10 meter /33ft..
Check Stock

[3 Pack] KEYGMA LED Strip Light Dimmer, DC 12V-24V Dimmer Switch for Strip Lights 2835 3528 5050 5630 5730 3014, Single Color

  • The 12 volt led dimmer switch is knob-operated control. You could easily adjust the brightness or turn on/off the strip lights or LED rope light via rotating the knob..
  • PMW dimming: 0-100% smooth dimming range, no flickering no humming..
  • Widely used for single color 2835/ 3528/ 5050/ 5630/ 5730/ 3014 LED strip light, LED rope or ribbon lights..
  • The cable lenght is 5.3 inches for each side and the body size: 2.56*1.26*1.34 inch. The LED strip light dimmer comes with a standard DC 5.5*2.1mm female/ 3.5*1.35mm male connector, easy to use and simple wiring..
  • Notes: DO NOT overload use. The Max. output current is 2A and the Max. output power is 60W. The supply voltage of the LED strip light dimmer is DC12V~24V..
Check Stock

40 Pieces LED Strip Lights Connectors 2 Pin RGB Strip Lights Connector T Shape Solderless LED Adapter Light Connectors L Shape RGB LED Connector for SMD 3528 2835 LED Strip Light (8 mm)

  • ...re installation to ensure safe operation, and these LED light strip connectors are suitable for 0 - 4 A current and 0 - 24 voltage.
  • Moreover, these LED connectors are suitable for LED light strip SMD 3528 2835, and the maximum power is 72 W.
  • Easy to use: first of all, you need to open the wire clip, then install the ribbon light into the connector.
  • When installing, you should make sure the side of the light strip is in accordance with the site of + symbol in the connector.
  • Lastly, close the wire clip, you will find that there are no other tools needed, the operation is easy and fast, you can enjoy your bright and beautiful lighting.
  • Wide application: these strip light connectors can be applied for SMD 3528 2835 LED strip light, and they also fit for most light strips in the market.
  • Furthermore, the LED strip connectors are very suitable for DIY LED strips, kitchen, the back of TV and so on, it makes the LED strip joints clean and beautiful.
  • Please pay attention that you should remove the silicon around the solder wire before inserting the LED strip lights connector to avoid unnecessary trouble.
Check Stock

StarlandLed 10-Pack 6.6ft/ 2 Meter U Shape LED Aluminum Channel System with Milky Cover, End Caps and Mounting Clips, Aluminum Profile for LED Strip Light Installations, Very Easy Installation

  • ... used for various kinds of led strip light projects.They can make your strip lights look professionally installed and make your lights a customized size to fit your cabinets and never worry about the tape coming loose and your lights coming down..
  • FEATURES:This led strip light channel can accommodate LED strips/tape/ribbon that are 8-12 millimeters wide.Metal mounting clips provides easy and secure installation.Frosted Light diffuser slightly diffuses the light to create softer,smoother,desirable lighting effect.It not only protects the strip lights from dust and other undesirable elements,but also works as a metal heat sink that helps to spread the heat generated by the working light..
  • INSTALLATION: The led aluminum channels and plastic covers can be cut easily by a regular hack saw.The cover simply snaps in place for ease of installation and disassembling.You can mount this light-weighted product by mounting clips or double sided adhesive tape..
Check Stock

12V 5A Power Supply for LED Strip Lights, 60W Power Adapter, 120V AC to 12V DC Transformer(1 set)

  • 12V Power Supply, DC 12 Volt 5Amps Output, 60 Watt Max Wattage.
  • Used for LED Strip Lights and 12V DC Devices (0.5A 1A 1.5A 2A 3A 4A 5A all are Suitable).
  • Commercial Grade AC to 12V DC Power Supply Adapter.
  • 12V Transformer New Upgraded Low Fever & No Noise, 1 Years Warranty.
  • Work for 12Vdc Devices at Max 5 Ampere 60Watt: RGB & Single Color 2835 3528 5050 5630 5730 DC12V Low Voltage Flexible LED Rope Strip Lights, LED Ribbon Tape Light, LED Modules, LED Cabinet Lamps, Under Counter Lighting, CCTV Cameras , Security Systems, the transformers Replacement for 12Volt LCD Monitors , 12Vac TVs, 12V Wireless Router , Hub, 12 Vac ADSL, LEDs Remote Controler and other 12 Vdc Lamp Devices or Generic Electronic items.
Check Stock

30 Pieces LED Light Strip Connectors Include 2 Pin 8 mm RGB Solderless Connectors and Adapter Terminal Extension in T-Shape, X-Shape, L-Shape for SMD 3528, 2835 LED Light

  • Package includes: you will get 30 pieces LED light strip connectors include 15 pieces 2 pin connectors, 5 pieces L shaped RGB connectors, 5 pieces X shaped light connectors and 5 pieces T shaped led light connectors, which can meet your different needs.
  • Quality material: the LED solderless connector is made of PBT, which is heat-resistant and flame-retardant to use safely.
  • In addition, the plastic part is thick and not easy to break, so it can be applied for long time.
  • Working condition: these LED light connectors can support 0 - 4 A current and 0 - 24 voltage input, which are suitable for SMD 3528 and 2835 LED lights, and you should pay attention to use correctly for ensuring safety and extending service life.
  • How to use: first you should open the wire clamp, then insert the ribbon light into the connector and clamp the cover (no soldering required), finally, to make sure the side of the ribbon strip is aligned with the + symbol, closing the buckle clamp and pulling the wire gently that you can use it.
  • Widely applicable: the light connectors are suitable for DIY LED tape, which can be applied to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Check Stock

Olafus White LED Strip Lights, 32.8ft 6000K Daylight 12v LED Light Tape, 10m Cuttable Dimmable Tape Lights, Ambient Rope Lighting for Bedroom Kitchen TV Cabinet Stair Home Decoration 600 LEDs 2835

  • Ultra Bright and Safe to Touch: 32.8ft/10m long led strips with 600 super bright daylight white LEDs. 12V working voltage and UL listed power supply(included). Low temperature and safe to touch.
  • Dimmable: Comes with a dimmer switch. Easy to change the brightness of the led tape lights or shut the lights off. Great for a bedroom or a dorm room.
  • Flexible LED Strip Kit: 32.8ft/10m Low Profile White LED Strip, an UL Listed power adaptor, a dimmer, 9Pcs mounting clips.
  • Easy to Install: Peel the liner off of the sticky backing and lay them wherever you want or mount the LED strips with supplied mounting clips. Plug and play.
  • Durable and Long Lasting: The flexible cool white led strip lights are made of longlasting components, ribbon light perfect for kitchen cabinet lighting, vanity lights, TV backlights, hallway, living room, staircase, bar, shop window, bookcase, display cabinet, pantry, workbench light up a beer sign and almost anywhere.
Check Stock

50ft White LED Strip Lights,12V Dimmable Tape Lighting with Infrared Remote,SMD 2835 LEDs Adhesive Ribbon Light ,Connectable,Cuttable,Indoor Rope Light for Room Mirror Bedroom Kitchen

  • 【Safe to use】Comes with a UL Listed power adapter, the working voltage is 12V, extremely Low Heat,safe to touch.This LED ribbon has excellent heat dissipation,much more durable,life span up to 50,000 hours.Note:The light strip is not waterproof..
  • 【Dimmable LED light】You can simply adjust the light Mode,Brightness,set time to turn off the light strip and switch ON/OFF with the Infrared remote,super easy to control,more convenient for daily use..
  • 【Cuttable & Linkable】This LED strip light has 2 rolls,each roll has 225 Units LEDs, total 450 bright white LEDs. You can cut this lighting strip between every 3 LEDs, it won't damage the rest part use.
  • and also re-connect the cutting parts together.Besides,with 50ft length design,long enough to decorate the bedroom,cabinet,party,wedding,etc..
  • 【Flexible LED tape】Designed with strong adhesive backing,easy to install on clean and dry surface,peel off the tape and then DIY your TV,mirror,stair,bookcase,table,closet and more.It won't fall off or damage the surface when tear away. Also equip with some clamps to fix the strip..
Check Stock

FSJEE 4 Pin LED Strip Connector Kit for 5050 10mm LED Light Strip,Include 8 Types of Solderless LED Strip Accessories,Provide Most of Parts for DIY LED Strip Lighting Project

  • 1. Application ---- 4pin 10mm LED quick connector kit suitable for 10mm wide SMD 5050 RGB LED ribbon lights,connecting non-waterproof and waterproof LED strips,but need peel off the coating of waterproof LED strips..
  • 2.High Quality ---- Flame retardant PVC is durable and flexible. The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan..
  • 3.DIY Combination ---- RGB Extension cable connector kit-This is a perfect accessory kit for your LED strips.It includes multi of connectors and almost meet all the connectors which used in your DIY colorful LED lighting program and showing the best effects..
  • 4. Easy Installation ---- RGB 4pin 10mm LED strip connectors are flexible and durable,Can be jointed with connectors by yourself.No soldering,no stripping ,just snap down quickly and vigorously with a pliers then you can enjoy your colorful lighting effects.These LED connectors support current Max 3A @24V and Max 6A @12V input..
  • 5. Warranty ---- 24months warranty for all FSJEE LED strip connectors, 90 days money back guarantee for any reason, 24 hours online customer service..
Check Stock

THMOOTHER 20-Pack 3.3FT 1Meter V Shape LED Strip Aluminum Channel Diffuser System, Extruded Alu Track Milky Cover with Corner Connector and Mounting Kit ,Easy Cut and Installed Curved Lens Profile

  • [Adequate Accessories]end caps-12pcs mounting clips-12pcs .For 20meter 20AWG Extension Wire Cord in white color please search for "B01N42RLM1.
  • [Features & Benefit]This led strip light channel can accommodate LED strips/tape/ribbon that are 8-12 millimeters wide.Metal mounting clips provides easy and secure installation.Frosted Light diffuser slightly diffuses the light to create softer,smoother,desirable lighting effect.It not only protects the strip lights from dust and other undesirable elements,but also works as a metal heat sink that helps to spread the heat generated by the working light..
  • [Easy Installation]The led aluminum channels and plastic covers can be cut easily by a regular hack saw.The cover simply snaps in place for ease of installation and disassembling.You can mount this light-weighted product by mounting clips or double sided adhesive tape..
  • [Multiple Application]Perfect for indoor use,such as,showcase,under cabinet,truck shell, window, door frames, bar,stairs,and so on,ideal for 3528,5050,2835,5630 led strip lights mounting,.
  • [60 Days MONEY BACK] 100% satisfaction or 100% Money Back in 60days, No Question Asked..
Check Stock

Onforu 49.2FT White LED Strip Lights, 6000K Daylight Dimmable Strip Lighting, 2835 LEDs LED Tape Light,12V Adhesive Rope Light, Flexible Ribbon Light for Living Room Mirror Bedroom Kitchen

  • ... dimmable LED light strip operates with 12V working voltage and a UL Listed power adapter for safe use. Extremely Low Heat and touchable. The excellent heat dissipation makes it much more durable and reliable..
  • 【EASY INSTALLATION & DIY】 Self-adhesive back with adhesive tape for safe and easy application.
  • And LED ribbon lights can be cut along with the cutting marks on the copper sheet, without damaging the rest strips. Perfect for your DIY home lighting decor. Widely used as under cabinet lights, room lights, wardrobe lights, and more..
  • 【WHAT YOU GET】 3 rolls of 16.4ft/ 5m (Totally 49.2ft / 15m) Daylight White Light Strip, a UL Listed power supply with a dimmer, 20 fixing clips..
Check Stock

MY BEAUTY LIGHT White LED Strip Lights,16.4ft Dimmable LED Light Strip with Memory Function,300 Bright 6500K 2835 LEDs,Strong Adhesive 12v Flexible LED Rope Lights for Kitchen Cabinet Mirror Bedroom

  • ...l be more and more sticky.And it also comes with adhesive clips and screws for fixing firmly.
  • Cuttable and Linkable: Every 3 leds as a unit is with a cutting mark, you can cut it according to its cutting mark. Then DIY the flexible led tape light length by connectors(connectors not included).
  • Safe to Use: The 12v led ribbon lights got SGS approval. Power adapter got ETL and FCC certification with short circuit protection. Please rest assured to use. And if you meet any problem, pls contact us at any time, and we will give you satisfactory soluton..
Check Stock