Reviews Led Indoor Display Module

DC 12V LED Power Supply Driver Transformer - Lustaled 15W Waterproof IP67 120VAC to 12V DC Converter Constant Voltage LED Switching Power Supply for LED Strip Lights, G4 MR11 MR16 LED Display (2-Pack)

  • [DC 12V LED Power Supply]: Mini size 15W LED driver transformer, Input: AC100-265V, Output: DC 12V.
  • [Wide Application]: Our 15W LED power supply driver is suitable for most of devices with DC12V such as CCTV, Illuminated Module Signboard, Cabinet Lights, LED Strip Lights, LED Display, LED Module, Indoor/Outdoor Deck Lights, Indoor Stair Step Lights, LED Light Bulbs like G4, MR11, MR16 LED bulbs..
  • [Good Heat Dissipation]: LED 12V transformer is made of aluminum, easy for heat dissipation and ensure stability. 100% Waterproof IP67 protect for outdoor use.
  • [Safer Design]: This DC 12V LED driver is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in.
  • [Note]: Please confirm whether the input voltage (AC100-265V) can work in your place before purchase the 12V switching converter, please make sure the power is lower than or equal to the rated power supply, otherwise it may burn..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi Arduino (Blue LEDs)

  • [Specifications] This is a basic 4-digit 7-segment Led display clock module, the LEDs are blue..
  • [Compatibility] This clock module uses TM1637 IC, it compatible with Raspberry Pi and Arduino.
  • [Easy to Use] The clock module connected to digital I/O via 2 pins..
  • [Easy to Install] This LED display designed with 4 mounting holes for easy installation..
  • [High Quality] The clock module is made of high quality electronic components, stable and reliable performance.
Check Stock

IRONWALLS Storefront Lights for Business, 120FT 240PCS 3 LED Module Light, SMD5050 Window LED Lights Strip, Multi-Colors Store Advertising Lights for Letter Sign Lighting, Car, Home Decor

  • ...ntroller and power supply included in the package to ensure all the module has stable and same brightness for you. 12V DC input voltage, 60W per power supply. Constant current supply and safe low voltage, no worry of electrical shock..
  • ✨【Practical Decorative Lights for Indoor & Outdoor】With high sealing PVC plastic shell material, the waterproof rating of RGB light strip is up to IP68 and it can work in -20-60℃, suitable for indoor & outdoor use. And each module of this waterproof LED light has self-adhesive tape backside, peel and stick, easy to use..
  • ✨【Versatile LED Storefront Lights】 The storefront LED module lights can be widely used for home garden decoration , landscape layout, party, wedding decor, stage adornment, cars, letters design, business signs, step lights and so on. These LED light around your storefront would surely attract customer attention and make your store more noticeable..
Check Stock

POWLAB SMD5050 Storefront Lights, 120Ft Store Window LED Lights 240Pcs 3 Led Module Light RGB Storefront Window Strip Light Super Bright Waterproof for Business Store Light Letter Advertising

  • the working power is 0.72W per module, Low power consumption, high energy efficient. Packing included: 12 strings x 20Pcs LED Module Storefront Light, 3x remote controller, 3x receiver, 3x power plug and 18x wire connectors are included. No need to buy accessories separately. ideal for indoor and outdoor different DIY applications..
  • Widely Application- The store window led lights are perfect for home, store, wine shop, signs, stereo shine word, light box, landscape layout and stage adornment, blister word,storefront, etc. You can install these led storefront light around your windows to attract customer attention and make your store more noticeable..
Check Stock

IRONWALLS 2 Packs Storefront Light 100ft, 400 Pieces 3 LED SMD5050 LED Module Light for Windows, Colorful Waterproof Window Strip Light Business Decorative Light for Advertising Sign, Store, Party

  • ... wireless remote control. Different festivals, events, occasions, you can choose different colors to decorate your store or home garden..
  • ✨【Practical Decorative Lights】With high sealing PVC plastic shell material, the waterproof rating of RGB light strip is up to IP68 and it can work in -20-60℃, suitable for indoor & outdoor use. And each module of this waterproof LED light has self-adhesive tape backside, peel and stick, easy to use..
  • ✨【Wide Applications】 The storefront light features wide application, can be used for home garden decoration , landscape layout , party, wedding decor, stage adornment, cars, letters design, business signs and so on. These LED light around your storefront would surely attract customer attention and make your store more noticeable..
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

100Ft Extremely Bright LED Modules Window Lights White Storefront Light Outdoor 3-LED 200Pcs 12v Adhesive Waterproof Strip Lights for Letter Signs, 40-45lm Per LED

  • Shell material: PVC plastic. Light source: 5630 5730. LED quantity: 3 x 20Pcs x 10strings. Voltage: DC 12V. Power: 1.44W. Lighting color: white light. Light source life: 50000h. Length: 6.8 cm/2.68 inch. Module Width: 1.4 cm/0.55 inch.Wire Length: 7.8 cm/3.07 inches (excluding terminal). Total Length: 3003 cm (100 feet)..
  • WHY CHOOSE BEAMNOVA LAMP BEADS - Lower power consumption, longer service life, higher brightness and produces less heat radiation. Also, they have strong controllability, easy to achieve color and brightness changes, and rapid to respond. Each LED Module has 3 LED beads..
  • USED INDOOR OR OUTDOOR - With fully enclosed PVC shells, BEAMNOVA IP68 waterproof LED light strips can work in -20~60℃. Widely installed as home decor, indoor window lights, or for outside commercial letter signs. Suitable for 12V DC input voltage..
  • EXTREMELY BRIGHT & USER-FRIENDLY - 3pcs 5730 LEDs with lens per module, 40-45LM Per led. With self-adhesive tape on each LED strip back. Just peel and stick..
  • DIY AVAILABLE - You can cut the LED strips to the actual length you need for lightbox, storefront light, LOGO sign, letter light, or holiday vibe decor..
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino

  • 4 LED lights (LED indicator to know the importance of doing in the actual project, with this indicator can work directly with the program status indicators for easy debugging..
  • AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino.
  • Four digital (using 74HC595 driver provincial IO learning SPI), you can do digital display test (can display temperature, voltage, counter value, etc.)..
  • Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control..
  • Expansion board directly with the SG90, MG945 MG995 and other steering gear connected to achieve the robot and other complex actions..
  • Expansion board directly with the SYN6288 free voice module docking,it can achieve voice broadcast function..
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

EAGWELL Module Lights, 100 FT LED Window Lights Waterproof Storefront Light Business Decorative Lights 12V 5050 RGB LED Lights for Advertising Signs Business Store Light with SM-4P Connectors

  • 【Can be Cut Off】10 ft of each string ,total 100 ft (10 lots of 100 ft). 20 Pcs led module each string ,3 Leds each module, so that you can cut it each led into the length you want, DIY your own LOGO or Lighted Store Signs. ideal for indoor and outdoor different DIY applications.
  • 【Ideal Decorative Light】The led modules lights can widely used in Store, Auto Interior Light,Restaurant, Coffee, Bar, Bank, Airport, Railway, public advertise and notice .Channel Letters Back lighting, Advertisement Signs, and Signage letters..
Check Stock

Icstation DC 12V Programmable Temperature Controller, Smart Home Incubator Aquarium Car Improvement Mini Digital Thermostat Regulator Switch Module Waterproof Sensor -58℉ to 230℉

  • 【Celsius & Fahrenheit Display】Programmable mini digital temperature control unit with -50℃ to 110℃ (-58℉ to 230℉) measuring range.
  • Thermostat regulator switch module has dual LED display the set temperature and current temperature, with waterproof NTC (10K 0.5%) temperature sensor probe, on-board tactile push button set the trigger temperature and alarming temperature.
  • 12V 1CH relay control the power on/off when the ambient temperature reach the set value, low power sumption <.
  • Easy installing and setting in 30 minutes, splotting size 46 X 26.5mm/1.81 X 1.04inch (L*W).
  • Power Supply: DC12V 200mA, Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H).
  • Cable Length: 30cm/12inch, Probe: 2cm/0.8inch.
  • Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment. Such as temperature control of production workshop, car or automobile, hatching aquaculture, tobacco industry, printing house, aquarium, fish tank, heater, cooling equipment, bedroom and so forth.
Check Stock